antarius11
New Member
- Total Posts : 49
- Reward points : 0
- Joined: 2014/11/04 17:44:59
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/03/13 09:20:57
(permalink)
300mhz Man, I have been tempted to do this as well the only thing putting me off is finding replacement thermal pads for the air cooler. Any chance you can point me in the right direction? And if you have any re-assembly tips I'll take those too, ha.
I just reused pads that came with hybrid cooler.
|
WarDevil23
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2014/08/30 17:09:53
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/03/15 05:04:55
(permalink)
At this point I'm so annoyed with the pump buzz and this fan issue that I may as well just do a custom loop for water cooling like I should have in the first place smh
|
jhoffman1983
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2020/09/18 22:09:04
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/03/31 10:08:33
(permalink)
This just started happening to me after rolling back to the original FTW3 Ultra -> Hybrid conversion BIOS while attempting to get Re-Sizable Bar working. After running latest firmware install from PX1, I was able to get Re-Sizeable bar to enable but now I have this 100% fan spin up 1-2 seconds every now and again while in a game. Fun times.
|
300mhz
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2018/07/21 13:56:12
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/03/31 11:33:21
(permalink)
jhoffman1983 This just started happening to me after rolling back to the original FTW3 Ultra -> Hybrid conversion BIOS while attempting to get Re-Sizable Bar working. After running latest firmware install from PX1, I was able to get Re-Sizeable bar to enable but now I have this 100% fan spin up 1-2 seconds every now and again while in a game. Fun times.
LOL, and I just checked this thread yesterday to see if the latest BIOS fixed the fan issue. I really should just stop hoping all together. Im sorry you’re suffering with this now. I don’t even want to attempt flashing or changing anything to try and get resizable BAR working for me. I don’t trust EVGA at all any more and that’s a shame.
|
jhoffman1983
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2020/09/18 22:09:04
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/03/31 15:19:56
(permalink)
300mhz
jhoffman1983 This just started happening to me after rolling back to the original FTW3 Ultra -> Hybrid conversion BIOS while attempting to get Re-Sizable Bar working. After running latest firmware install from PX1, I was able to get Re-Sizeable bar to enable but now I have this 100% fan spin up 1-2 seconds every now and again while in a game. Fun times.
LOL, and I just checked this thread yesterday to see if the latest BIOS fixed the fan issue. I really should just stop hoping all together. Im sorry you’re suffering with this now.
I don’t even want to attempt flashing or changing anything to try and get resizable BAR working for me. I don’t trust EVGA at all any more and that’s a shame.
Yeah their firmware/PX1 leaves a lot to be desired. I ended up having to use a motherboard chassis fan header with a PWM splitter for the AIO fans w/ASUS fan xpert to limit them from ever going over 1500 RPM (they're just above obnoxiously loud past that).
|
WarDevil23
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2014/08/30 17:09:53
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/04/20 10:53:29
(permalink)
Hey guys, so after a few months of dealing with this **** I caved and just got a Corsair commander pro to stick the AIO fans to. Honestly worth it, noise and temps are now WAYYYYYY more consistent and the user experience is far more enjoyable. For ****s and giggles I kept Precision open while stress testing using the Commander pro and even though there is no longer a fan #1 plugged into the hybrid kit PWM splitter it is still showing the fan going to 3,000 RPM and down to 110 RPM, so there is clearly something wrong here on the software side of things, but with EVGA doing nothing I guess I gotta toss $60 at this problem. Anyways, my main take away here is, if you're looking to buy a Hybrid cooler this generation, just don't!
|
wernerru
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/09/21 10:47:22
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/04/26 18:42:13
(permalink)
What speeds did you set the fans to, and using the 3080 as the temp, or one of the CP temp sensors stuck to the rad as the temp? Curious because I'm about to do the same, as I already have a CP, and debating on replacing the fans with some Noctua just to get rid of the noise at the same time - that fan ramp is killing me lately.
|
WarDevil23
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2014/08/30 17:09:53
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/04/26 18:56:56
(permalink)
I have two Noctua a12x25s set on a curve of about 800 rpm at idle to 1,200 rpm at 40 degrees to maxing out at 1,550 rpm at around 70 degrees, at which point the fans become decently audible. It only hits that if I'm really stress testing the card and I have it top mounted with a pull config in an H710, so really not ideal conditions, anyone's else's setup should fair better but I'm fine with the noise to temp in my rig. I have iCUE just adjusting the fans based on the GPU sensor, didn't bother with doing anything fancier than that and it works perfectly fine.
|
Bluedragonwolf
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2016/09/29 17:13:46
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/06/25 13:00:43
(permalink)
Figured that I would add my two cents since receiving my hybrid kit a bit ago. I was having the same problem of the rad fans spinning up to ridiculous speeds for about a second or so every minute to 3 minutes while gaming. Didn't seem to matter if it was under heavy load or not. I tested it with a few games (Overwatch, TW: WH2, Cyberpunk, etc..). Saw loads everywhere from 30% to 100%. Didn't matter, fans still spiked at intermittent times with no obvious reason as to why. This is with the newest Precision X1 (1.2.2.0) and with the latest firmware. My solution is similar to others, but slightly different. I have a corsair AIO for my CPU. What I did was disconnect my CPU rad fans from the AIO and hooked them up to my motherboard headers. I then hooked my GPU fans up to the AIO fan headers. Then control the fans through iCue using the GPU temp. Basically it's the same as purchasing a Corsair Commander Pro as others have done in this thread, but without having to pay for it. Sadly, this does require you to already have a CPU AIO as well. However, for the most part, this should work with other brands AIO's as well (assuming they have their own control software). I still would have preferred to have the fans hooked up via the GPU headers, and to not have made a cabling mess in my tower fixing this; but whatever, it was driving me nuts. That said, the hybrid kit was worth it. I live in a hot, dry area in the summer and was seeing temps of 82C at max load under air. I am now seeing temps of 60-61C under max load with the hybrid. So that makes me feel better at least.
|
askopte
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2020/09/25 18:27:45
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/06/25 15:12:41
(permalink)
Just set up the correct bios, it seems like the Hybrid bios are controlling the fans base on the RPM instead of the percentage. (Not a problem in air-cooled model, but indeed one on hybrid since you can install your own fan) For example, regardless of using LNA or not my A12X25s are always spinning at 750rpm idle. (I'm using normal mode). In a 450L@60c load the fan running at 1650rpm with LNA on and ~1800rpm with LNA off. Appraently with LNA the fans is hitting the rpm limit. That being said, it's still less noisy than my stock FTW3 at 380W@82c, and that's quite an improvement. I'd love to see a percentage-based fan curve bios update though.
|
bryantnguyen49
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2021/06/23 10:23:03
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/07/02 02:20:03
(permalink)
askopte Just set up the correct bios, it seems like the Hybrid bios are controlling the fans base on the RPM instead of the percentage. (Not a problem in air-cooled model, but indeed one on hybrid since you can install your own fan) For example, regardless of using LNA or not my A12X25s are always spinning at 750rpm idle. (I'm using normal mode). In a 450L@60c load the fan running at 1650rpm with LNA on and ~1800rpm with LNA off. Appraently with LNA the fans is hitting the rpm limit. That being said, it's still less noisy than my stock FTW3 at 380W@82c, and that's quite an improvement. I'd love to see a percentage-based fan curve bios update though.
sorry but what does lna stand for?
|
bubububububu
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/09/01 17:16:28
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/08/04 23:23:15
(permalink)
bryantnguyen49
askopte Just set up the correct bios, it seems like the Hybrid bios are controlling the fans base on the RPM instead of the percentage. (Not a problem in air-cooled model, but indeed one on hybrid since you can install your own fan) For example, regardless of using LNA or not my A12X25s are always spinning at 750rpm idle. (I'm using normal mode). In a 450L@60c load the fan running at 1650rpm with LNA on and ~1800rpm with LNA off. Appraently with LNA the fans is hitting the rpm limit. That being said, it's still less noisy than my stock FTW3 at 380W@82c, and that's quite an improvement. I'd love to see a percentage-based fan curve bios update though.
sorry but what does lna stand for?
Liquid Nitrogen Alloy. That guy's playing with some serious gear.
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/08/05 02:48:07
(permalink)
|
BoomBurst
Superclocked Member
- Total Posts : 109
- Reward points : 0
- Joined: 2021/06/01 01:54:11
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/10/03 00:57:49
(permalink)
Does anyone know what type of fans that the hybrid use?? what type of bearing they use?? should i be sticking with the stock fans that come with it? or replace with like other brands like corsair or EK???
|
b3ka123
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2017/05/08 05:53:55
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/10/03 01:23:15
(permalink)
LOL @ finding this thread when Hybrid kit is being shipped to me. I will report back after I install it. I definitely will not tolerate that. As for fans questions above. I'm pretty sure stock fans are not worth much and I will be swapping them with some Noctuas. And if fans spinning issue arise I will plug them into MOBO and control with Argus Monitor depending on GPU temps.
post edited by b3ka123 - 2021/10/03 01:24:32
|
vcast
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2020/11/17 17:16:34
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/11/18 17:38:56
(permalink)
Just going to add here, that I still see this issue. I decided to move my fans to my mobo just to stop hearing the revving. I still see the issue though with the card fan, and it shows the rad fans which are not plugged in also going to high RPM. I was sent a new card and hybrid for RMA, and the same thing happened, so I ended up sending back the card. Is there a new BIOS update or something for this? Not ideal that my GPU fan curve is chained to my CPU, as I don't currently have the capability to link it to my GPU. Picture60,000,000 RPM 10,000,000 RPM
post edited by vcast - 2021/11/18 17:41:10
|
Bmoorelucas
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2017/02/05 09:12:22
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2021/12/24 13:24:58
(permalink)
I just found this while searching why my newly installed 3080 ftw3 hybrid kit fans were spinning at full speed for no reason. Core at 35c on the desktop… all board temps similar/lower… Fan curve control not responsive at all in px1. Also weird random fan revving. Decided to check the fans one by one, ended up switching the fans around on the splitter and boom both spin down and are responding to the curve in px1. Hope this helps someone else!
Side note: fans are really noisy, might swap but I don’t hate the rgb rings.
|
Hakeem_28
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2016/07/22 04:15:46
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/01/08 01:05:52
(permalink)
Bmoorelucas I just found this while searching why my newly installed 3080 ftw3 hybrid kit fans were spinning at full speed for no reason. Core at 35c on the desktop… all board temps similar/lower… Fan curve control not responsive at all in px1. Also weird random fan revving. Decided to check the fans one by one, ended up switching the fans around on the splitter and boom both spin down and are responding to the curve in px1. Hope this helps someone else!
Side note: fans are really noisy, might swap but I don’t hate the rgb rings.
The issue for me is the fan on the hybrid shroud...spins at 3000rpm....If I reinstall the hybrid bios, and update the firmware, The fans do not rev up to 3000rpm...I can reset my PC and everything still works. But the moment I power off my PC and Power it back on, the fan (on the hybrid shroud) revs to 3000rpm and stays there...the only way to fix it is to reinstall the bios and it works....if I power off my PC and power back on....it returns...there is definitely a software problems somewhere....wish EVGA would get off their keister and look into this.....
|
Lardman678
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2020/09/25 19:12:00
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/01/14 16:21:25
(permalink)
Is there any update on how to fix this? I may just have to get a fan controller at this point, because I'm pretty sure the fans are not supposed to be doing this: edit: won't let me post images or links, so imgur . com /a/jRD8mn9 Basically, fan reports trying to go to 30,000,000rpm
post edited by Lardman678 - 2022/01/14 16:22:48
|
Hakeem_28
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2016/07/22 04:15:46
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/01/14 19:12:32
(permalink)
Lardman678 Is there any update on how to fix this? I may just have to get a fan controller at this point, because I'm pretty sure the fans are not supposed to be doing this: edit: won't let me post images or links, so imgur . com /a/jRD8mn9 Basically, fan reports trying to go to 30,000,000rpm
I've got the same issue...only way to stop it is to keep reflashing the bios....but the problem with that is, when you power off your PC and power back on, it will return with the same issue....there is something wrong with the software/firmware....my fans spin at 3000rpm and I can't get an answer/solution from EVGA.....SMH.
|
muaythaimaster74
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/07/21 05:52:27
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/01/27 21:38:58
(permalink)
This isn't strictly a windows issue. I run linux only and got the fan ramping up to 100% issue as well on my 3080ti ftw3 with the hybrid kit. Setting a custom fan profile with the following got rid of the problem for me. Temp | Duty Cycle 20 | 20 30 | 30 40 | 40 50 | 50 60 | 60 70 | 70 80 | 80 The max the fans have ramped up to are 65 duty cycle on 65 temp, which is pretty bearable during gaming. The temps are typically in the high 20's to low 30's at idle
|
vaeritas
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2012/04/29 02:00:04
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/02/09 21:25:52
(permalink)
Hakeem_28
Lardman678 Is there any update on how to fix this? I may just have to get a fan controller at this point, because I'm pretty sure the fans are not supposed to be doing this: edit: won't let me post images or links, so imgur . com /a/jRD8mn9 Basically, fan reports trying to go to 30,000,000rpm
I've got the same issue...only way to stop it is to keep reflashing the bios....but the problem with that is, when you power off your PC and power back on, it will return with the same issue....there is something wrong with the software/firmware....my fans spin at 3000rpm and I can't get an answer/solution from EVGA.....SMH.
Just chiming in that I'm suffering from this same issue, and with the same "fix" of reflashing firmware/VBIOS... until I reboot. This is a new problem for me and seems to have begun after I disassembled the card to reapply pads and paste. (This was originally an air-cooled FTW3, converted to hybrid kit a while ago.) I believe I applied a firmware update via Precision, then it all went to ****. Edit: I think this is finally resolved via performing the following steps: - Uninstalled P1. Didn't do any special cleansing of leftovers or regedit.
- Rebooted into safe mode, removed drivers via DDU.
Note: I actually think safe mode did something here. I normally don't bother, but I swear I did all these steps less using safe mode with no luck. YMMV. - Still in safe mode, installed 3080_FTW3_HYBRID normal, on normal.
I can't seem to link to the bios despite it being hosted on EVGA, but maybe you could compare the date modified if you really want to follow the exact same steps.
- Rebooted in regular OS. Installed latest nvidia drivers. Rebooted again.
- Installed P1. Allowed it to run firmware upgrade, then ran the VBIOS upgrade in the Resize Bar tab.
- Rebooted again. I don't remember if there was another firmware upgrade (I don't think so), but if there was I ran it.
It's been steady now across several reboots. When in doubt, nuke everything and try, try again I suppose. Do feel like safe mode was doing work during DDU and initial vbios install, though I can't imagine what was running outside of safe mode that might have caused issues. Edit: It was solid for a few weeks. This is now failing. Randomly, this problem starts up again and can briefly be fixed with a firmware downgrade and upgrade back. It eventually starts again, and not just at boot. I'll be looking at email or browsing the web and it'll start up again.
post edited by vaeritas - 2022/03/14 15:08:23
|
lastplayboy
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2009/01/22 17:05:03
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/03/25 20:40:35
(permalink)
Any updates to this? Been dealing with this for over a year now. Just reinstalled the bios, uninstalled precision, reinstalled, fan curves do nothing, the card just maxes out the fans at will, or cycles from quiet to max every few minutes.... Thank you for any news on this issue in advance....
|
lastplayboy
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2009/01/22 17:05:03
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/04/01 05:20:02
(permalink)
Just a friendly follow-up to this post. Any fix for this issue? Any plan to address in the future? Thank you
|
thezeus66
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/12/28 17:01:48
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/04/02 17:55:23
(permalink)
i've been having this same issue for 1.5 years now on my 3090 ftw ultra converted to hybrid if you use dlss in games fans ramp up every 10 seconds the problem is the mem on the backplate gets about 9-10 degrees warmer than mem chips next to the front of the die.if you undervolt the card to 775mv and boost the clock to arounnd 1900mhz in msi afterburner there is no ramping in fans and everything stays cool
|
lisek99
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2022/02/15 11:52:36
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/04/03 08:11:01
(permalink)
Please delete, I posted in a wrong thread
|
nnunn
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2009/02/02 11:19:31
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/04/03 15:39:29
(permalink)
|
lastplayboy
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2009/01/22 17:05:03
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/04/23 07:00:08
(permalink)
Trying to play Borderlands 3, minute the game starts, fans ramp to 100% and stay there no matter what I change in Precision. I called EVGA tech support and was told to re-follow the instructions in forum post:
I did this and it does not fix the fans at max situation. Please help in finding a resolution to this issue. Thank you
|
lastplayboy
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2009/01/22 17:05:03
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/05/04 14:25:13
(permalink)
OK, I solved half of the problem, the radiator fans. I installed two corsair fans and a corsair commander core. Set the fan curve and boom the temps are in the 60s and the fans are super quiet. The other half of the problem, the card fan. This fan continues the cycle up and down problem. What is interesting is that Corsair iCue shows me three Videocard temperatures 1, 2 and 3. 1 matches the GPU temperature in Precision. 2 is about 10 degrees hotter than 1 but I do not know what that represents. It is 3 that concerns me the most, this shows 105 degrees! I am wondering if that is the videocard memory temps and thats why the blower goes to maximum? Any help would be appreciated. thank you!
|
lastplayboy
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2009/01/22 17:05:03
- Status: offline
- Ribbons : 0
Re: 3080 ftw3 hybrid kit fans spin up to 3000 rpm
2022/05/27 11:28:48
(permalink)
Ok, Final update: RMAed the card, have it running on air. Added 4 fans to the case for a total of 10 (HAF5000D). Took the hybrid kit, put it back in the box and I am selling it on eBay. I gave up
|