Tommy2bar
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2010/10/15 08:50:22
- Location: Ireland
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/17 03:03:28
(permalink)
nesbit
I think this is the first time someone’s associated it with a popping noise. Might mean it’s not a IC die problem but a VRM component problem on these AIBs. Just speculation of course.
I heard a pop from my first one dying as well, I was AFK when the second one died though. Probably the sound of the fuse on the VRMs popping. My 2nd card was making a really nasty coil whine like noise while I was testing though, almost sounded like arcing.
|
R3L3NTL3SS
SSC Member
- Total Posts : 575
- Reward points : 0
- Joined: 2020/09/07 16:38:12
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/17 03:46:21
(permalink)
No way all these failures are because of PSU issues like people keep trying to point to. Across this forum and multiple others, cards are dying with 1000+ watt quality PSU's. Not to mention, many are dying while the card isn't even under any kind of power load. Literally just sitting idle at desktop. I might be getting a 3080 today, and the pages of cards dying on this forum alone certainly have me worried.
|
ChrisG683
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2010/04/12 09:05:21
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/17 09:29:40
(permalink)
I got my RMA started, the EVGA rep suggested my power supply might be crappy which is dumb. I told him it's an EVGA one that worked fine on my OC'd 2080 Ti and 3080 (planned on re-selling to my friend who can't get one), unless he's telling me EVGA power supplies are crappy. Sad the RMA process is so slow, and I'm fully expecting my next one to blow up too... I'm not sure what to do, I don't want to eat the restock fee.
|
R3L3NTL3SS
SSC Member
- Total Posts : 575
- Reward points : 0
- Joined: 2020/09/07 16:38:12
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/17 09:55:37
(permalink)
ChrisG683 I got my RMA started, the EVGA rep suggested my power supply might be crappy which is dumb. I told him it's an EVGA one that worked fine on my OC'd 2080 Ti and 3080 (planned on re-selling to my friend who can't get one), unless he's telling me EVGA power supplies are crappy. Sad the RMA process is so slow, and I'm fully expecting my next one to blow up too... I'm not sure what to do, I don't want to eat the restock fee.
Yeah...there's no doubt that PSU's are getting blamed too much for what is obvious a card issue. People are reporting issues with seriously overkill wattage PSU's from quality manufacturers and it's all just PSU related? K... Most setups are pulling WAY under 600 watts under load (full system draw). These cards are not that hard on PSU's...
|
20219348762341
FTW Member
- Total Posts : 1289
- Reward points : 0
- Joined: 2013/12/21 21:26:25
- Status: offline
- Ribbons : 2
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/17 10:45:52
(permalink)
ChrisG683 I got my RMA started, the EVGA rep suggested my power supply might be crappy which is dumb. I told him it's an EVGA one that worked fine on my OC'd 2080 Ti and 3080 (planned on re-selling to my friend who can't get one), unless he's telling me EVGA power supplies are crappy. Sad the RMA process is so slow, and I'm fully expecting my next one to blow up too... I'm not sure what to do, I don't want to eat the restock fee.
It’s not about size or brand of PSU, It’s about how certain PSU respond to transient and voltage draping, but PSUs shouldn't solely be blamed for some of the cards death, it is the card itself that seem to have issues. I’m saying that because myself and member of my family used Seasonic 1000-TX and Seasonic 1300 Prime Platinum, both approved by Seasonic for 3000 series cards, yet together 4x 3090's died anyways
post edited by AWK16 - 2020/11/17 10:48:25
|
Tommy2bar
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2010/10/15 08:50:22
- Location: Ireland
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 07:59:15
(permalink)
AWK16 It’s not about size or brand of PSU, It’s about how certain PSU respond to transient and voltage draping, but PSUs shouldn't solely be blamed for some of the cards death, it is the card itself that seem to have issues. I’m saying that because myself and member of my family used Seasonic 1000-TX and Seasonic 1300 Prime Platinum, both approved by Seasonic for 3000 series cards, yet together 4x 3090's died anyways
Both of my cards died plugged into an EVGA 1600W T2, so yeah theres got to be a fault the cards going on here.
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 12:32:06
(permalink)
This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49131
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 13:09:27
(permalink)
LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Pics of damage?
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 13:25:30
(permalink)
Hopefully I uploaded that pic correctly. Haven’t done that before on this forum (I’m on mobile). Tried to compress it. It’s just a pic of the red LED on the GPU though. If you were wanting to see something else, sorry if I misunderstood.
Attached Image(s)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49131
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 13:29:11
(permalink)
LongLiveBobDole Hopefully I uploaded that pic correctly. Haven’t done that before on this forum (I’m on mobile). Tried to compress it. It’s just a pic of the red LED on the GPU though. If you were wanting to see something else, sorry if I misunderstood.
Yeah, I was looking for a pcb shot with the cooler removed.
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 13:32:51
(permalink)
My bad. With how my luck has been going lately with stuff, don’t think I’m gonna remove the cooler. Could see me breaking a fan or something and getting charged for the damage. Lol
|
ngaugler
Superclocked Member
- Total Posts : 138
- Reward points : 0
- Joined: 2018/11/08 14:10:51
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 13:50:39
(permalink)
So I finally got my 3080 FTW3 Ultra this week from the queue (has black accents). The entire PC reboots while trying to run the 'Scan' feature in Precision X1 and when I load 3dmark or any games the FPS flutter (100-200fps) and the video stutters. I tested a buddies 3090 and a different buddies 3080 FTW3 ULTRA and all worked fine. (The 3090 was a few weeks ago just for fun and it is amazing!) It's not my PSU (1000W G3 2 years old). No idea what is causing this issue. Guess its RMA time. The only difference I could see from GPU-Z was the middle 8-pin #2 was pulling most of the watts. Almost always double #3 and maybe 50% above #1? Once it got to the point where 8-pin #2 was at 98.7 the next MHz on the SCAN caused the whole PC to reboot. Every time. Tried several times and swapped cables between 8-pins to make sure it wasn't a psu / cable issue. Tried DDU in safe mode, uninstall Precision X1, reinstall, etc. On the other 3080 it seemed more evenly distributed across the 3. Hopefully in another week or so the RMA will be done and I'll have a stable card.
post edited by ngaugler - 2020/11/18 13:55:30
|
Zetta
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2015/05/20 15:12:15
- Location: NJ
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 14:36:03
(permalink)
LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Halo MCC claims another victim... It's weird, I don't know if everyone is just playing this game right now, but both me and my brothers 3090 Ultra died about an hour apart while playing MCC about 2 weeks ago, and you're the 3rd person I've seen on this forum have their card die while playing this game... Now I'm definitely scared to try it again since getting my new card.
|
tonydepo
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2007/05/09 13:52:18
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 15:54:21
(permalink)
Can you do me a favor and move the power wire with the red light to the right ? Does the right now light up? I recall doing that and the red light followed that one cable. However, I changed out the cable and that did not fix it.
Thanks
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 16:38:10
(permalink)
@Zetta Yeah it’s strange. Thanks for the heads up about others having problems too. Definitely think I will shelf MCC for the time being. Just curious, did yours break while paused as well?
@tonydepo I’ll try to remember to try this tomorrow for you buddy and report back. Is booting the PC with the “dead” GPU still installed dangerous to other components in the PC? Sorry for the stupid question, but never had a GPU die on me.
|
Tommy2bar
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 2010/10/15 08:50:22
- Location: Ireland
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 17:06:13
(permalink)
Zetta Halo MCC claims another victim... It's weird, I don't know if everyone is just playing this game right now, but both me and my brothers 3090 Ultra died about an hour apart while playing MCC about 2 weeks ago, and you're the 3rd person I've seen on this forum have their card die while playing this game... Now I'm definitely scared to try it again since getting my new card.
I wonder if between 30-80% varying load does something to the power circuitry that they didn't catch in the earlier batches (thanks nutso Nvidia driver restrictions for 3rd parties!) because my first card died running Gran Turismo 3 on PCSX2. Hardly an excruciating load but varied a ton based on what was on screen with the resolution scaling set to 8X. I cant imagine MCC pegs the card or stays in the 90% usage range.
|
tonydepo
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2007/05/09 13:52:18
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 17:32:15
(permalink)
LongLiveBobDole @Zetta Yeah it’s strange. Thanks for the heads up about others having problems too. Definitely think I will shelf MCC for the time being. Just curious, did yours break while paused as well?
@tonydepo I’ll try to remember to try this tomorrow for you buddy and report back. Is booting the PC with the “dead” GPU still installed dangerous to other components in the PC? Sorry for the stupid question, but never had a GPU die on me.
@LongLiveBobDole It will not hurt your computer if the GPU is dead. :) I did it at least 5-7 times and tried another power supply outside my current box. :)
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 17:57:55
(permalink)
@tonydepo Wife decided to watch some tv drama so I went ahead and switched around those cables tonight. Lol. The same light (the left one in my case) stayed on. It didn’t change.
|
tonydepo
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2007/05/09 13:52:18
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 18:09:29
(permalink)
LongLiveBobDole @tonydepo Wife decided to watch some tv drama so I went ahead and switched around those cables tonight. Lol. The same light (the left one in my case) stayed on. It didn’t change.
Interesting when I changed my cables, the red light would follow. Thanks and hope you get a new one soon :) EVGA already took care of me and I am doing a cross ship. I will have it here on Tuesday of next week. Great company
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 18:11:35
(permalink)
@tonydepo Good luck with the new card man :-). Customer service in my case was top notch too
|
iamWalk
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2020/11/18 18:48:11
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 19:56:57
(permalink)
I experienced an issue w/ the 3090 as well - crash, no video output, but can hear windows running just fine. Fried my motherboard, the pcie16 slot was busted afterwards. Moved it to a new PC, and experienced the exact same crash as above, although this time it didn't fry the mobo, at least. more details in a thread here: forums.evga.com/FindPost/3150118 LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Same game that caused my issues, although I didn't hear a pop.
post edited by iamWalk - 2020/11/18 20:10:15
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 20:10:23
(permalink)
@iamWalk Yet another one with Halo being the game in question when a failure occurs. Makes me wonder whether I should avoid Halo when I get my replacement or test the new GPU on it to make sure it works. Hate that your motherboard was fried from this. I hope my x16 slot still works because it is an Asus board and I haven’t heard good things about their customer service/RMAs. Good luck with everything.
|
20219348762341
FTW Member
- Total Posts : 1289
- Reward points : 0
- Joined: 2013/12/21 21:26:25
- Status: offline
- Ribbons : 2
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 20:24:55
(permalink)
LongLiveBobDole @iamWalk Yet another one with Halo being the game in question when a failure occurs. Makes me wonder whether I should avoid Halo when I get my replacement or test the new GPU on it to make sure it works. Hate that your motherboard was fried from this. I hope my x16 slot still works because it is an Asus board and I haven’t heard good things about their customer service/RMAs. Good luck with everything.
The death of cards is most likely not related to games, avoiding games to avoid issues... There might be higher voltage spikes at certain parts of the games, but quality components should handle that easily, card should be keep on dying
post edited by AWK16 - 2020/11/18 20:28:27
|
Data1987
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/11/13 10:52:16
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 20:42:58
(permalink)
Guess is time for a PSU update.
|
LongLiveBobDole
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2020/08/27 23:51:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 20:43:23
(permalink)
@AWK16 Just found it odd that Halo of all games has been what was running during a few GPU failures. Not trying to make any accusations or anything because I am definitely not an engineer or the like. But could the way certain games call upon the GPU (be it for power or whatever) help EVGA identify a potential problem or is it merely coincidence? Most likely a coincidence or simply a manufacturing defect inherit to all (especially new) devices. Maybe if they could replicate these failures through testing it could help identify and correct these issues in future products. EVGA know what they are doing, but was just trying to help. It’s kind of like getting food poisoning from a meal you’ve had plenty of times before. Most likely just a one time oddity, but it can make you think twice about having that meal again. Lol :-)
|
Left4monkeys
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/09/24 05:44:52
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/18 20:56:16
(permalink)
Zetta
LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Halo MCC claims another victim... It's weird, I don't know if everyone is just playing this game right now, but both me and my brothers 3090 Ultra died about an hour apart while playing MCC about 2 weeks ago, and you're the 3rd person I've seen on this forum have their card die while playing this game... Now I'm definitely scared to try it again since getting my new card.
I was also a victim of Halo MCC killing my 3090, I genuinely think that's the key not PSU's. Halo MCC, or maybe less in particular certain games?
|
jspataro99
iCX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2018/01/09 17:03:03
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/19 04:31:14
(permalink)
Left4monkeys
Zetta
LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Halo MCC claims another victim... It's weird, I don't know if everyone is just playing this game right now, but both me and my brothers 3090 Ultra died about an hour apart while playing MCC about 2 weeks ago, and you're the 3rd person I've seen on this forum have their card die while playing this game... Now I'm definitely scared to try it again since getting my new card.
I was also a victim of Halo MCC killing my 3090, I genuinely think that's the key not PSU's. Halo MCC, or maybe less in particular certain games?
My 3090 FTW3 Ultra died while playing The Division 2...
CPU: Intel 19-12900K Cooling: NZXT Kraken x62 (Push/Pull) Motherboard: Gigabyte Z690 Aorus Master GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz RAM Cooling: Corsair Dominator Platinum Airflow RGB SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB SSDs (SATA): 1x Crucial MX300 1TB / 1x WD Blue 1TB / 1x WD Green 240GB HDD: 1x WD Blue 2TB 5400 RPM Case: Phanteks P600S PSU: EVGA G2 1300W 80+ Gold Fully Modular Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz) Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
|
jspataro99
iCX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2018/01/09 17:03:03
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/19 04:44:13
(permalink)
iamWalk I experienced an issue w/ the 3090 as well - crash, no video output, but can hear windows running just fine. Fried my motherboard, the pcie16 slot was busted afterwards. Moved it to a new PC, and experienced the exact same crash as above, although this time it didn't fry the mobo, at least. more details in a thread here: forums.evga.com/FindPost/3150118
LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Same game that caused my issues, although I didn't hear a pop.
I just read the details in your other post. That sounds like a nightmare. Can you tell us if there was a single red light above one of the VGA power pins like in other cases here? I’m trying to determine whether I should be concerned about my mobo’s pcie16 slot being damaged as I wait to buy the 3090 FTW3 Ultra Hybrid after having RMA’d the 3090 FTW3 Ultra for a refund earlier this week. Of course I sold my 2080Ti right after I installed the new card, so I don’t currently have another GPU to test in my mobo in the interim.
CPU: Intel 19-12900K Cooling: NZXT Kraken x62 (Push/Pull) Motherboard: Gigabyte Z690 Aorus Master GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz RAM Cooling: Corsair Dominator Platinum Airflow RGB SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB SSDs (SATA): 1x Crucial MX300 1TB / 1x WD Blue 1TB / 1x WD Green 240GB HDD: 1x WD Blue 2TB 5400 RPM Case: Phanteks P600S PSU: EVGA G2 1300W 80+ Gold Fully Modular Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz) Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
|
iamWalk
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2020/11/18 18:48:11
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/19 06:35:51
(permalink)
jspataro99
iamWalk I experienced an issue w/ the 3090 as well - crash, no video output, but can hear windows running just fine. Fried my motherboard, the pcie16 slot was busted afterwards. Moved it to a new PC, and experienced the exact same crash as above, although this time it didn't fry the mobo, at least. more details in a thread here: forums.evga.com/FindPost/3150118
LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Same game that caused my issues, although I didn't hear a pop.
I just read the details in your other post. That sounds like a nightmare. Can you tell us if there was a single red light above one of the VGA power pins like in other cases here? I’m trying to determine whether I should be concerned about my mobo’s pcie16 slot being damaged as I wait to buy the 3090 FTW3 Ultra Hybrid after having RMA’d the 3090 FTW3 Ultra for a refund earlier this week. Of course I sold my 2080Ti right after I installed the new card, so I don’t currently have another GPU to test in my mobo in the interim.
I don't recall seeing a red light. I didn't know to look for it at the time, so it's possible I just missed it, or else my issue is slightly different from what others are experiencing but has the same symptoms(no video output while PC keeps running). The crash on the second PC didn't have a red light, but like I said that one was fixed after a reset, not a permanent death. I just ran an benchmark overnight, and frame capped it to be between 5-15% GPU usage, similar to what MCC ran at when I experienced both the crashes.. and it ran all night with no issues. My issues right now seem to be extremely specific to MCC. For the time being I just uninstalled it. If it happens in another game, especially one with low usage, that's another data point that might help track down the issue(hopefully not frying my current/replacement motherboard in the process).
|
jspataro99
iCX Member
- Total Posts : 378
- Reward points : 0
- Joined: 2018/01/09 17:03:03
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2020/11/19 06:51:51
(permalink)
iamWalk
jspataro99
iamWalk I experienced an issue w/ the 3090 as well - crash, no video output, but can hear windows running just fine. Fried my motherboard, the pcie16 slot was busted afterwards.
Moved it to a new PC, and experienced the exact same crash as above, although this time it didn't fry the mobo, at least.
more details in a thread here: forums.evga.com/FindPost/3150118
LongLiveBobDole This just happened to my 3090 FTW3 Ultra. I was playing Halo MCC of all games. Paused the game to go turn subtitles on and heard a pop. PC restarted with the single red LED (the far left one) on the GPU. Customer support was extremely helpful and fast though and they have me another card coming by next week hopefully. This was with a Asus Thor 1200W PSU and no overclocking on the card beside raising the power limit to 107% in Precision X1. My previous GPU on the same PSU had no problems whatsoever. Just wanted to add my experience in here.
Same game that caused my issues, although I didn't hear a pop.
I just read the details in your other post. That sounds like a nightmare. Can you tell us if there was a single red light above one of the VGA power pins like in other cases here? I’m trying to determine whether I should be concerned about my mobo’s pcie16 slot being damaged as I wait to buy the 3090 FTW3 Ultra Hybrid after having RMA’d the 3090 FTW3 Ultra for a refund earlier this week. Of course I sold my 2080Ti right after I installed the new card, so I don’t currently have another GPU to test in my mobo in the interim.
I don't recall seeing a red light. I didn't know to look for it at the time, so it's possible I just missed it, or else my issue is slightly different from what others are experiencing but has the same symptoms(no video output while PC keeps running). The crash on the second PC didn't have a red light, but like I said that one was fixed after a reset, not a permanent death. I just ran an benchmark overnight, and frame capped it to be between 5-15% GPU usage, similar to what MCC ran at when I experienced both the crashes.. and it ran all night with no issues. My issues right now seem to be extremely specific to MCC. For the time being I just uninstalled it. If it happens in another game, especially one with low usage, that's another data point that might help track down the issue(hopefully not frying my current/replacement motherboard in the process).
Thanks for letting me know. Hopefully, whatever is causing this issue will be resolved with the Hybrid series, at least in my case. Was your mobo that fried using pci 3.0 or 4.0 slots? I wonder if there is any correlation between the pci bandwidth available to these cards and the failure rate of the power pins.
CPU: Intel 19-12900K Cooling: NZXT Kraken x62 (Push/Pull) Motherboard: Gigabyte Z690 Aorus Master GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz RAM Cooling: Corsair Dominator Platinum Airflow RGB SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB SSDs (SATA): 1x Crucial MX300 1TB / 1x WD Blue 1TB / 1x WD Green 240GB HDD: 1x WD Blue 2TB 5400 RPM Case: Phanteks P600S PSU: EVGA G2 1300W 80+ Gold Fully Modular Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz) Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
|