gingertips
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2021/01/19 06:46:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 02:16:11
(permalink)
Another faulty 3080 FTW3 EVGA card here as well. My serial starts with 2014 & is red lipped & made in Taiwan Ive noticed stuttering in games the past month & also a large number of BSOD incidents occurring. And just to be clear its not overclocked & Im not running the latest games, the only game Ive been playing over the past month is COD WW2 which is over 3 years old & worked fine with my 1070 for all that time. This morning switched PC on, booted ok as I can hear Microsoft Teams alerts pinging on PC, but the card is dead, fans arent spinning even on power on and theres a solid red LED lit up near the power connectors. Already raised an RMA with Scan Computers in the UK earlier in the week, so hopefully they will be collecting on Monday but I then have to wait a week for them to test it and then wait for a replacement... Bit annoyed as I had originally ordered an Asus card, but they rang me up and said they would be getting EVGA cards in sooner (and it meant another £100 on top of the new PC build I had already paid for) My PSU is 850 Corsair gold so seems highly unlikely the issue is with the PSU
post edited by gingertips - 2021/01/29 05:33:34
|
Rokenian1
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2018/06/19 11:17:24
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 02:19:31
(permalink)
I originally purchased a 3090 FTW3 Ultra from Amazon. The serial number started with 2012, and the card had red lips. It died after two weeks, with the red LED above the power connectors. It died while I was playing Final Fantasy XIV. The replacement EVGA sent me has a serial starting with 2014, and has black lips. It just died about an hour ago, after working for a month. It died while I was playing Halo MCC. I'm going to try to get a refund as soon as their support lines open in the morning. I'm not looking to be paying shipping for a replacement every few weeks.
|
gingertips
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2021/01/19 06:46:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 05:36:17
(permalink)
Rokenian1 I originally purchased a 3090 FTW3 Ultra from Amazon. The serial number started with 2012, and the card had red lips. It died after two weeks, with the red LED above the power connectors. It died while I was playing Final Fantasy XIV. The replacement EVGA sent me has a serial starting with 2014, and has black lips. It just died about an hour ago, after working for a month. It died while I was playing Halo MCC. I'm going to try to get a refund as soon as their support lines open in the morning. I'm not looking to be paying shipping for a replacement every few weeks.
I feel for you. Let us know how you get on? I'm probably going to go with a replacement for now but am concerned given the comments on this thread to date & EVGA being tight lipped on the subject probably doesnt do them any favours as that leads to the assumption that they don't know what the problem is.
|
neteng101
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2018/02/03 06:56:57
- Status: offline
- Ribbons : 1
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 07:18:49
(permalink)
gingertips EVGA being tight lipped on the subject probably doesnt do them any favours as that leads to the assumption that they don't know what the problem is. They likely don't know yet so they can't share anything - just replacing cards and multiple reports of RMA units failing as well in short order. Seems to be a 3080/3090 FTW3 issue with the 3 power connectors and power delivery, and XC3 cards with 2 connectors don't suffer from the same failures.
|
MickNorris
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2021/01/29 07:56:40
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 08:02:31
(permalink)
What is the probability to get a FTW3 with this issues?
|
MickNorris
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2021/01/29 07:56:40
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 08:08:21
(permalink)
Edit, double post. Sorry.
|
exlink
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2007/04/27 20:38:59
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 08:41:09
(permalink)
MickNorris What is the probability to get a FTW3 with this issues?
Nobody outside of EVGA knows the failure rate.
|
liud21
iCX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2020/09/22 20:02:51
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 08:49:01
(permalink)
High enough to be noticable. If you lurk in the other forums, you'll see people complain about other issues, like coil whine it black screens, but rarely red light of death...
|
mr_allroy
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/12/13 13:48:11
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/29 12:50:02
(permalink)
Hefbn87
richardgoncalves
Hefbn87
richardgoncalves
mr_allroy I had my 3080 FTW 3 Ultra for 9 days until I discovered the fans at 100%, blank screen and red light above the left most connector. The only thing I could do was hold my case power button to shut off my system. When the system did shut down, there was a popping sound from the card. Probably blew a capacitor or something. Swapped slots, pci-e cables, reset mobo bios etc and no go. It's being RMA'd but being the first time I bought EVGA, I'm not very impressed or confident that I won't be requesting another RMA in 9 days (give or take). Especially after seeing quite a few other folks are having the same or similar issues. All I can do is hope, or sell it. BTW - power supply is 80 Plus Platinum.
It’s not your PSU, cables, the fact that you looked at it funny one afternoon - the design is obviously faulty.
Good news is RMA replacement bricking is far less common.
6 weeks strong with replacement - didn’t change a thing to my system.
Some questions:
1. Was the replacement refurbished or new?
2. Does the replacement serial number start with 2012, 2014, 2114, or something else?
3. Have you tried the replacement with Halo MCC and/or GTA V?
Replacement was refurbished with serial starting 2014.
I have not played Halo MCC or GTA V - haven’t played LoL either.
My original card bricked while playing CP2077
Thanks. My 3080 FTW3 was on the way out, getting BSODs and subsequent black screens on startup but otherwise, up until I took it out of the system after getting an RMA going, wasn't doing anything suspect. Was fine in the small number of games I played before starting the RMA. 2012 serial number. I'm wondering if the refurbished cards are actually *less* likely to fail than the brand new ones, because EVGA presumably is fixing whatever is wrong with them when they refurbish. The replacement that'll be coming for me will be brand new, which makes me worry I'll be dealing with another card death. Do you have any sense whether RMA bricking is less common even if the card is new?
Mine just showed as delivered to EVGA. Hopefully I can play games soon and hopefully I won't have to go down the RMA route again. I know this stuff happens and EVGA seems pretty good about RMA's. However, it would be nice to get some kind of official feedback in acknowledgement that this isn't one or two isolated issues and that it's being corrected.
post edited by mr_allroy - 2021/01/29 12:56:16
|
Gogod2020
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 2020/10/19 14:31:11
- Status: offline
- Ribbons : 1
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/01/30 09:55:37
(permalink)
Hefbn87 Some questions: 1. Was the replacement refurbished or new? 2. Does the replacement serial number start with 2012, 2014, 2114, or something else? 3. Have you tried the replacement with Halo MCC and/or GTA V?
RMA card returned to me 29/12/20. Brand new 2012 S/N red lips. Been playing GTA V fully maxed out for hours. Also played Division 2 full ultra, Division 1 full ultra, Forza Horizon full ultra, Cyberpunk full ultra, wow shadowlands full ultra, CoD cold war full ultra. Problems are not related to PSU or games or what not. I have an HX1200. The RMA card runs fine with no signs that it might fail.
Intel Core 10700K, Z490 Aorus Elite AC v.1.0, GSkill 32GB 3000/CL14, EVGA 3080 FTW3 Ultra, Corsair HX1200, Dell S2721DGF, DRP4, Be Quiet SW3 140mm pwm high speed x4, Be Quiet 500DX, Samsung NVME 970 Evo Plus 1TB, Samsung SATA 860 Evo 1TB
|
jamexr
iCX Member
- Total Posts : 266
- Reward points : 0
- Joined: 2016/07/21 16:30:16
- Location: SLC, Utah, USA
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/01 01:17:00
(permalink)
These cards have fuses, I'm suspecting these fuses are too sensitive and blow up, this no more power to the card and the light comes up.
|
liud21
iCX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2020/09/22 20:02:51
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/01 03:57:20
(permalink)
jamexr These cards have fuses, I'm suspecting these fuses are too sensitive and blow up, this no more power to the card and the light comes up.
I suspect that too, GN's video of the board shows they have them and it's supposed to make the gpu easier to repair instead of frying the while board. I suspect some of the fuses are low quality or defective and when the card pulls a said voltage, the first fuse pops, thus killing the card....
|
kajer533
New Member
- Total Posts : 40
- Reward points : 0
- Joined: 2015/09/14 22:30:04
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/01 11:46:46
(permalink)
Hard to say what is happening. My 2014 serial FTW3-3090 black screen full fan crashed at least 10+ times before it went dead, but don't remember LED of death or not. 2012 serial RMA card black screen crashed twice before getting the LED. My 2114 RMA card has black screen crashed once already. Blowing fuses and black screen / full fan crashes may or may not be related, hard to say. I'm still leaning toward a power management bug suspected by a few forum threads a while ago; It seems to make logical sense in how these cards are failing. Light load, older DX11 games, and the card may have a bug in switching power states during game play. I 75% undervolted / 80% power capped the 3rd card I have, and during GTA5 the GPU fans would spike occasionally like the card was attempting the black screen crashes, until it finally did after a few hours of game play. After that, I removed all limits, reset everything back to 100/100, and set the NV control panel 3D mode to prefer max performance globally. Downside? 130W / 40C idle. Upside? 8+ hours of GAT5 with no random fan spin ups and stable 60C temp all night long. Next step is to set max performance per application in the NV control panel, and let the card idle at ~30W / 20C when not in a game. edit: spelling mistakes
post edited by kajer533 - 2021/02/01 12:30:12
|
djc5166
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/07/09 21:13:06
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/01 12:20:44
(permalink)
liud21
jamexr These cards have fuses, I'm suspecting these fuses are too sensitive and blow up, this no more power to the card and the light comes up.
I suspect that too, GN's video of the board shows they have them and it's supposed to make the gpu easier to repair instead of frying the while board. I suspect some of the fuses are low quality or defective and when the card pulls a said voltage, the first fuse pops, thus killing the card....
I've thought this since I saw their video on the FTW3. Probably none of the other brands have these fuses, and the ones on the FTW3 are either too sensitive or some are just low quality.
|
jamexr
iCX Member
- Total Posts : 266
- Reward points : 0
- Joined: 2016/07/21 16:30:16
- Location: SLC, Utah, USA
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/01 23:15:41
(permalink)
djc5166
liud21
jamexr These cards have fuses, I'm suspecting these fuses are too sensitive and blow up, this no more power to the card and the light comes up.
I suspect that too, GN's video of the board shows they have them and it's supposed to make the gpu easier to repair instead of frying the while board. I suspect some of the fuses are low quality or defective and when the card pulls a said voltage, the first fuse pops, thus killing the card....
I've thought this since I saw their video on the FTW3. Probably none of the other brands have these fuses, and the ones on the FTW3 are either too sensitive or some are just low quality.
And I don't see many XC3 cards having these issues, and those cards don't have fuses for sure. I can bet money when evga comes forward with these, its the fuses...
|
radian23
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2011/12/12 19:48:03
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/07 14:48:31
(permalink)
Any info on how long it took this issue come up for most people. I just picked up at 3080 FTW3 ultra today.
|
Spurious_ECG
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2020/07/24 16:42:44
- Location: Canada
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/07 15:17:42
(permalink)
Have not had the issue with my 3080 FTW3 Ultra and have been running it since November. I have experienced driver issues, but none that have persisted or recurred after updating.
|
Fatal1ty_666
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2020/12/30 17:31:08
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/08 13:09:59
(permalink)
radian23 Any info on how long it took this issue come up for most people. I just picked up at 3080 FTW3 ultra today.
my first card failed within 30 minutes of having it in the machine, some people have reported their card working as expected for months, no issues, then it bricking. Some people are on their 3rd card, my second card has worked as it should for the month I've had it. Im not really sure on the percentage failure rate of these cards.
|
Zalszibar
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2020/09/02 06:34:12
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/12 05:08:17
(permalink)
Just another report of the red light issue. This happened to my recent RMA 3090 FTW3 Ultra card after having it for a couple of weeks. Was playing Valheim, and the video outputs died and the fans spun up to 100%. Powering the PC on and off resulted in one single red light, second in the series of four from left to right (x o x x). I called tech support and they had me swap around the PSU cables and try different VGA ports. Also tried moving the power cable from my UPS to directly in the wall. All of the troubleshooting did not help. Going to send the card back today :(
|
Korn09
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2018/07/02 15:36:55
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/12 08:19:56
(permalink)
Reporting in with another red light of death issue on a 3090 FTW3 Ultra. Was also gaming at the time when black screen / full fan speed. Reboot into 4 red LEDs initially and then settled on the left PCIE power adapter. Swapped around power cables, reseat, the works... nothing changed. Issued RMA and waiting on card now. Card was not overclocked on core/mem specifically though it did have the 119% power limit BIOS installed with the power target maxed out. Hoping for the best on the replacement.
|
Bruno747
CLASSIFIED Member
- Total Posts : 3909
- Reward points : 0
- Joined: 2010/01/13 11:00:12
- Location: Looking on google to see what Nvidia is going to o
- Status: offline
- Ribbons : 5
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/12 09:41:14
(permalink)
jamexr
And I don't see many XC3 cards having these issues, and those cards don't have fuses for sure. I can bet money when evga comes forward with these, its the fuses...
I don't know. I don't think evga would keep silent if it were as simple as fuses unless they really are terrified of having to cover all the shipping fixing their mistake. I really believe that there is still something more at hand causing these issues. My FTW3 3090 has been solid but I am looking for a FE card to swap it if I can ever get one from best buy. Then I can offload this time bomb and breath easier. I'm even willing to eat the 10 year warranty I paid for if it means I don't get stuck in a cycle of returning cards to a company who knows full well there is an issue but fails to properly acknowledge it and make owners whole with a proper solution. Even if that's a different model card with refund or bill to makeup difference. Come on EVGA break your silence, tell us what's going on, and offer a solution.
X399 Designare EX, Threadripper 1950x, Overkill Water 560mm dual pass radiator. Heatkiller IV Block Dual 960 EVO 500gb Raid 0 bootable, Quad Channel 64gb DDR4 @ 2933/15-16-16-31, RTX 3090 FTW3 Ultra, Corsair RM850x, Tower 900
|
krs360
New Member
- Total Posts : 51
- Reward points : 0
- Joined: 2017/08/02 09:03:38
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/17 04:04:56
(permalink)
Honestly feels like it's a problem with incorrect/bad fuses. When one of mine died to this I heard/saw an electrical pop/failure very close to the PCIE connector(s). In total I had two faulty cards. I really wish Gamers Nexus or Buildzoid would do some digging to be honest. I really wish EVGA would just come out with some kind of statement about this/fixes being applied for the future. Even though the FTW3 would be my card of choice until the silence is broken and solution offered I, probably like many others won't be repurchasing the FTW3 cards. It's great that the RMA process is hailed as being "quick and hassle free" but honestly sending an £1800 card to Germany with full insurance, especially multiple times gets expensive and I can't think of any other retailer that sells in the UK that makes you pay shipping for return of faulty goods. You'd normally only have to pay return shipping if you change your mind and decide to return. To add insult to injury, if the failure happens outside of 30 days from purchase you could well end up with a refurbished card. Apart from the early Gigabyte cards which had problems with the PCIe connections (pins pushing back) I can't think of any other brand that has cards die to the same issue on a regular basis. As much as I like EVGA they are currently riding on their success from previous generations, along with their phone support being widely loved and appreciated. It's really not hard to address your customer base with a simple statement, or even acknowledgement that you're looking into it.
|
gchen749
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2020/09/25 20:39:41
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/18 16:47:29
(permalink)
So I was playing LoL when all of a sudden, entire system is immediately shut off. When I attempt to turn it back on, the VGA light on the motherboard is on. And on the GPU, no fans spinning. The LED above the left most power connector is red. I tried replugging power connectors to the GPU and to the PSU. Tried reseating the GPU. Nothing worked. Plugged in my friend's 1070 ti next day and all was well. Anyway, the RMA was approved really quick. Card is already en-route. Hopefully, the replacement will have no issues for years to come. I only had this 3090 FTW3 since November
|
anchang233
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2020/12/19 06:08:13
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/21 12:04:51
(permalink)
gchen749 So I was playing LoL when all of a sudden, entire system is immediately shut off. When I attempt to turn it back on, the VGA light on the motherboard is on. And on the GPU, no fans spinning. The LED above the left most power connector is red. I tried replugging power connectors to the GPU and to the PSU. Tried reseating the GPU. Nothing worked. Plugged in my friend's 1070 ti next day and all was well. Anyway, the RMA was approved really quick. Card is already en-route. Hopefully, the replacement will have no issues for years to come. I only had this 3090 FTW3 since November
That really sucks. Got my 3090 FTW3 and hopefully it doesnt have issues. I've used 3090 TUF and MSI Gaming X Trio 3090s and they both are pretty solid, if this card doesn't work out, back to Strix I go.
|
neteng101
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2018/02/03 06:56:57
- Status: offline
- Ribbons : 1
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/02/21 14:33:43
(permalink)
krs360 Honestly feels like it's a problem with incorrect/bad fuses. When one of mine died to this I heard/saw an electrical pop/failure very close to the PCIE connector(s). In total I had two faulty cards. I really wish Gamers Nexus or Buildzoid would do some digging to be honest. Its not bad fuses - its the unbalanced power inputs due to the uP9511 voltage controller EVGA used on these cards. XC3 cards are much more power limited so they don't attempt to draw enough power to blow fuses but the FTW3 cards with their increased power limits tries to draw too much power from one of the inputs or the PCIe slot and boom goes a fuse. Other cards that use the uP9511 also suffer unbalanced power inputs, but those tend to be low end cards from other board partners, not the higher end cards like the FTW3 so they are power limited from failure. Buildzoid already commented on the uP9511 being a bad choice for the FTW3 cards but I doubt he knew back then just how bad of a choice these are. And aside from a total revision/redesign these cards will continue giving problems, especially FTW3s and 3090s - more current/power draw, easier to overload something. The current controller is analog meaning the BIOS/firmware can't effectively fix this unless they were to severely limit performance.
|
Heraclesion
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/03/03 12:58:00
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/03/03 13:17:39
(permalink)
I just had the same problem, I bought the card RTX 3090 FTW3 ULTRA Gaming a month ago and it had problems only with Call of Duty: Black Ops - Cold War, sometimes the screen would go black and the fans would start running at full speed, the only solution was to restart the computer and it would work again. As it only happened in that game, I thought it was a problem with the game that they are updating it almost every day. But today I installed GTA V and after completing the initial presentation mission the same thing happened to me as with Call of Duty, during a video of GTA V the screen turned black and the fans again at full speed, I restarted the computer, I tried it again and I heard a click and the computer shut down, when I turned it on again the card did not turn on and it only had a red light above the leftmost power connector. My power supply is new 850W so seems unlikely the issue is that. I will contact the store where I bought it to see who manages the warranty. I am angry and disappointed. PS: My serial starts with 2014 and made in Taiwan too. Edit 04/03/2021: I add that the card is 3090.
post edited by Heraclesion - 2021/03/04 06:42:14
|
KickAssCop
Superclocked Member
- Total Posts : 220
- Reward points : 0
- Joined: 2015/06/25 16:53:06
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/03/03 18:55:40
(permalink)
I have the 2114 Taiwan Black card. What are the chances of it kicking the bucket?
PC: Ryzen 5900X | X570 Tomahawk | 3090 FTW3 Ultra | CX 55, G7 32 | 660P 1 TB, P1 1 TB, EVO 850 1 TB, EVO 840 500 GB, 830 256 GB, MX500 1 TB | TridentZ NEO RGB 32 GB 3733 C16 | Supernova 1300W G2 | P500A | H150i PRO | K70 | G502Consoles: PS5, XSX, PS4, Switch X 2
|
exlink
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2007/04/27 20:38:59
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/03/03 19:03:02
(permalink)
KickAssCop I have the 2114 Taiwan Black card. What are the chances of it kicking the bucket?
Somewhere between 0% and 100%. In other words, no one knows. We don't have reliable data to make any determination of failure rates.
|
Hefbn87
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2020/09/12 21:34:46
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/03/03 19:39:22
(permalink)
Heraclesion I just had the same problem, I bought the card a month ago and it had problems only with Call of Duty: Black Ops - Cold War, sometimes the screen would go black and the fans would start running at full speed, the only solution was to restart the computer and it would work again. As it only happened in that game, I thought it was a problem with the game that they are updating it almost every day. But today I installed GTA V and after completing the initial presentation mission the same thing happened to me as with Call of Duty, during a video of GTA V the screen turned black and the fans again at full speed, I restarted the computer, I tried it again and I heard a click and the computer shut down, when I turned it on again the card did not turn on and it only had a red light above the leftmost power connector. My power supply is new 850W so seems unlikely the issue is that. I will contact the store where I bought it to see who manages the warranty. I am angry and disappointed. PS: My serial starts with 2014 and made in Taiwan too.
Is yours a 3080 or 3090?
|
Heraclesion
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/03/03 12:58:00
- Status: offline
- Ribbons : 0
Re: 3080 FTW3 Ultra stopped working, 1 single red light
2021/03/04 00:12:13
(permalink)
Hefbn87
Heraclesion I just had the same problem, I bought the card a month ago and it had problems only with Call of Duty: Black Ops - Cold War, sometimes the screen would go black and the fans would start running at full speed, the only solution was to restart the computer and it would work again. As it only happened in that game, I thought it was a problem with the game that they are updating it almost every day. But today I installed GTA V and after completing the initial presentation mission the same thing happened to me as with Call of Duty, during a video of GTA V the screen turned black and the fans again at full speed, I restarted the computer, I tried it again and I heard a click and the computer shut down, when I turned it on again the card did not turn on and it only had a red light above the leftmost power connector. My power supply is new 850W so seems unlikely the issue is that. I will contact the store where I bought it to see who manages the warranty. I am angry and disappointed. PS: My serial starts with 2014 and made in Taiwan too.
Is yours a 3080 or 3090?
3090
|