EVGA

2205 MHz 2080 Ti FTW3

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 08:53:45 (permalink)
AHowes
Update with board temps showing? Is that load voltage?

Heres mine.





Associate Code: 9E88QK5L7811G3H


 
#31
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 09:17:23 (permalink)
bcavnaugh
AHowes
Update with board temps showing? Is that load voltage?

Heres mine.






2220 with 1.5v? Px1? Your card name is different with HC at the end? What's that? Did I miss a bios update?

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#32
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 11:25:40 (permalink)
AHowes
bcavnaugh
AHowes
Update with board temps showing? Is that load voltage?

Heres mine.






2220 with 1.5v? Px1? Your card name is different with HC at the end? What's that? Did I miss a bios update?

Hydro Copper, same card as yours with the Hydro Copper Water Block Pre-Installed by EVGA.

Associate Code: 9E88QK5L7811G3H


 
#33
sn0warmy
Superclocked Member
  • Total Posts : 218
  • Reward points : 0
  • Joined: 2019/02/07 22:05:02
  • Location: Colorado
  • Status: offline
  • Ribbons : 2
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 11:40:46 (permalink)
AHowes
Update with board temps showing? Is that load voltage?
Heres mine.



 
Super jealous of those temps!

bcavnaugh





 
Aren't you rocking a Kingpin card now? How's it treating you?
#34
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 11:46:37 (permalink)
sn0warmy
AHowes
Update with board temps showing? Is that load voltage?
Heres mine.


Super jealous of those temps!
bcavnaugh


Aren't you rocking a Kingpin card now? How's it treating you?

Yes and Well. But the Kingpin is off topic of the FTW3 so it would take this thread off topic to talk more about it.
You can see what I am getting here in this thread EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 
post edited by bcavnaugh - 2019/04/16 13:25:44

Associate Code: 9E88QK5L7811G3H


 
#35
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 12:28:49 (permalink)
Would be nice if someone uploaded the hc bios sp mine would read the same.. the correct way and also prob wont have the 3 fan controls which I dont need anymore.

Mines got the stock shipping bios 90.02.17.00.AA.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#36
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 12:33:44 (permalink)
AHowes
Would be nice if someone uploaded the hc bios sp mine would read the same.. the correct way and also prob wont have the 3 fan controls which I dont need anymore.

Mines got the stock shipping bios 90.02.17.00.AA.

It is on GPU-Z Website.
But the three Fan Controls are not going to go away.
You also still have a Fan Header on your Graphics Card.

Associate Code: 9E88QK5L7811G3H


 
#37
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 13:17:33 (permalink)
bcavnaugh
AHowes
Would be nice if someone uploaded the hc bios sp mine would read the same.. the correct way and also prob wont have the 3 fan controls which I dont need anymore.

Mines got the stock shipping bios 90.02.17.00.AA.

It is on GPU-Z Website.
But the three Fan Controls are not going to go away.
You also still have a Fan Header on your Graphics Card.


Alrighty then.. forget it.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#38
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 13:27:40 (permalink)
OK I will find it for you and post at link to it.
When I tried to upload mine GPI-Z said it was already in their database.
https://www.techpowerup.com/vgabios Not listed and not sure why. Link Below is Direct to the FTW3 HC Bios.
https://www.techpowerup.com/vgabios/207291/207291
 

post edited by bcavnaugh - 2019/04/16 13:46:45

Attached Image(s)


Associate Code: 9E88QK5L7811G3H


 
#39
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 13:31:20 (permalink)
bcavnaugh
OK I will find it for you and post at link to it.
When I tried to upload mine GPI-Z said it was already in their database.
https://www.techpowerup.com/vgabios/?architecture=NVIDIA&manufacturer=EVGA&model=RTX+2080+Ti&version=&interface=&memType=&memSize=&since=6+months+ago
 


Ment what's the point if I still have the same fan controls in px1.. no difference if i bothered to flash the card.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#40
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: 2205 MHz 2080 Ti FTW3 2019/04/16 14:20:39 (permalink)
AHowes

Ment what's the point if I still have the same fan controls in px1.. no difference if i bothered to flash the card.



And you'd have to remember to flash to the original BIOS if you had to RMA. 

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#41
glassjaw.au
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2018/11/28 01:58:37
  • Status: offline
  • Ribbons : 0
Re: 2205 MHz 2080 Ti FTW3 2019/04/19 15:39:35 (permalink)
How are you able to run 413W on the FTW3?
#42
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/19 15:49:21 (permalink)
glassjaw.au
How are you able to run 413W on the FTW3?

I got a Great Card is all I can say.
I also got a really bad but working card as well.

Associate Code: 9E88QK5L7811G3H


 
#43
glassjaw.au
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2018/11/28 01:58:37
  • Status: offline
  • Ribbons : 0
Re: 2205 MHz 2080 Ti FTW3 2019/04/19 15:53:58 (permalink)
Haha! How does one go about getting Great Card performance too? I have two with HC in SLI and the only thing holding them back is the power limit.
#44
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/19 15:56:00 (permalink)
glassjaw.au
Haha! How does one go about getting Great Card performance too? I have two with HC in SLI and the only thing holding them back is the power limit.

Same here but the poor performing card brings down the good one to even them out I guess.

Associate Code: 9E88QK5L7811G3H


 
#45
glassjaw.au
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2018/11/28 01:58:37
  • Status: offline
  • Ribbons : 0
Re: 2205 MHz 2080 Ti FTW3 2019/04/19 15:59:00 (permalink)
So you’re not shunt or bios modding to get the higher power limit?
#46
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: 2205 MHz 2080 Ti FTW3 2019/04/19 16:17:59 (permalink)
glassjaw.au
So you’re not shunt or bios modding to get the higher power limit?

Correct I am using the Stock Bois (OC) and have not Modified the Card in any way.

Associate Code: 9E88QK5L7811G3H


 
#47
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: 2205 MHz 2080 Ti FTW3 2019/04/19 16:27:28 (permalink)
Who'ed mod a $1500 + $200 card? Richer then I. Buy a kingpin insted of that risk..

I've done it in the past plenty in the past.. last cards I've nodded were gtx8800s. But I've could of bought many of those for this price.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#48
Graphite8five
SSC Member
  • Total Posts : 660
  • Reward points : 0
  • Joined: 2016/08/04 22:27:09
  • Status: offline
  • Ribbons : 3
Re: 2205 MHz 2080 Ti FTW3 2019/04/21 02:10:12 (permalink)
I'm wondering if I got worst 2080 Ti FTW3 bit of silicon you could hope for, doesn't overclock too great. I'm about to spend quite a bit of money on a custom loop so I really hope I can hit numbers like 2200Mhz...


 
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S. 
#49
Graphite8five
SSC Member
  • Total Posts : 660
  • Reward points : 0
  • Joined: 2016/08/04 22:27:09
  • Status: offline
  • Ribbons : 3
Re: 2205 MHz 2080 Ti FTW3 2019/04/21 02:13:20 (permalink)
bcavnaugh
glassjaw.au
How are you able to run 413W on the FTW3?

I got a Great Card is all I can say.
I also got a really bad but working card as well.




I was running Heaven benchmark today and watching PX1 at the same time and I was getting bursts of 394W. 


 
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S. 
#50
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: 2205 MHz 2080 Ti FTW3 2019/04/21 03:26:10 (permalink)
Graphite8five
I'm wondering if I got worst 2080 Ti FTW3 bit of silicon you could hope for, doesn't overclock too great. I'm about to spend quite a bit of money on a custom loop so I really hope I can hit numbers like 2200Mhz...




Make sure you're not thermal limited since that would be a bummer to spend a lot on custom cooling and not see a difference.
 
Also see if it's not the PSU and if it's in spec via PSU tester.  Make sure you're running each PCIe power cable individually and not branched off from one another.

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#51
Graphite8five
SSC Member
  • Total Posts : 660
  • Reward points : 0
  • Joined: 2016/08/04 22:27:09
  • Status: offline
  • Ribbons : 3
Re: 2205 MHz 2080 Ti FTW3 2019/04/21 04:00:46 (permalink)
GTXJackBauer
Graphite8five
I'm wondering if I got worst 2080 Ti FTW3 bit of silicon you could hope for, doesn't overclock too great. I'm about to spend quite a bit of money on a custom loop so I really hope I can hit numbers like 2200Mhz...




Make sure you're not thermal limited since that would be a bummer to spend a lot on custom cooling and not see a difference.
 
Also see if it's not the PSU and if it's in spec via PSU tester.  Make sure you're running each PCIe power cable individually and not branched off from one another.




I'm definitely thermal limited with the current air cooler, anything I run eventually will get to 60C which equates to about 2055-2070Mhz. I don't understand, how can I still be thermal limited after installing a custom loop?


 
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S. 
#52
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: 2205 MHz 2080 Ti FTW3 2019/04/21 10:40:33 (permalink)
Graphite8five
GTXJackBauer
Graphite8five
I'm wondering if I got worst 2080 Ti FTW3 bit of silicon you could hope for, doesn't overclock too great. I'm about to spend quite a bit of money on a custom loop so I really hope I can hit numbers like 2200Mhz...




Make sure you're not thermal limited since that would be a bummer to spend a lot on custom cooling and not see a difference.
 
Also see if it's not the PSU and if it's in spec via PSU tester.  Make sure you're running each PCIe power cable individually and not branched off from one another.




I'm definitely thermal limited with the current air cooler, anything I run eventually will get to 60C which equates to about 2055-2070Mhz. I don't understand, how can I still be thermal limited after installing a custom loop?




My apologies as I must've missed your post about your current temps.  Yes, a custom loop should help.

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#53
Graphite8five
SSC Member
  • Total Posts : 660
  • Reward points : 0
  • Joined: 2016/08/04 22:27:09
  • Status: offline
  • Ribbons : 3
Re: 2205 MHz 2080 Ti FTW3 2019/04/21 20:15:51 (permalink)
GTXJackBauer
Graphite8five
GTXJackBauer
Graphite8five
I'm wondering if I got worst 2080 Ti FTW3 bit of silicon you could hope for, doesn't overclock too great. I'm about to spend quite a bit of money on a custom loop so I really hope I can hit numbers like 2200Mhz...




Make sure you're not thermal limited since that would be a bummer to spend a lot on custom cooling and not see a difference.
 
Also see if it's not the PSU and if it's in spec via PSU tester.  Make sure you're running each PCIe power cable individually and not branched off from one another.




I'm definitely thermal limited with the current air cooler, anything I run eventually will get to 60C which equates to about 2055-2070Mhz. I don't understand, how can I still be thermal limited after installing a custom loop?




My apologies as I must've missed your post about your current temps.  Yes, a custom loop should help.




No worries. I already know that I can hold 2085Mhz at 52C so I'm hoping 2100Mhz+ should be pretty obtainable with a custom loop. 


 
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S. 
#54
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: 2205 MHz 2080 Ti FTW3 2019/04/22 14:16:48 (permalink)
Done.. did test the card again on stock cooler before boxing it up.. for an hour atleast cause it was so baffling to me that the card would not overclock with anything at those 50-60c temps.

These cards need a custom water block!

I could not get really anything above 2050mhz stable. Highest temp was 60c but mostly the card ran in the 50s c.

I think the only clock I could get to run threw a firestrike extreme bench was 2050 or less.. like +100.. maybe and at 1.50-68v. That's using ab as px1 would not hold the voltage or clocks.

I'll check my notes later.

So average or below average card unless cooled to 36-39c.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#55
rjeftw
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2010/11/15 06:26:03
  • Status: offline
  • Ribbons : 0
Re: 2205 MHz 2080 Ti FTW3 2019/04/23 05:52:52 (permalink)
Pretty jealous of those speeds! Pretty amazing FTW3 you have there.

 
 
9900K 5.1Ghz | Gigabyte Z390 Aorus Master | 4x8GB GSkill TridentZ 3600Mhz| EVGA 2080Ti FTW Hydrocopper | AW3418DW and Dell 27DGR | Custom Water | EVGA 750 G3 | 
#56
transdogmifier
CLASSIFIED ULTRA Member
  • Total Posts : 6116
  • Reward points : 0
  • Joined: 2003/09/05 14:26:21
  • Location: Orlando, Fl
  • Status: offline
  • Ribbons : 17
Re: 2205 MHz 2080 Ti FTW3 2019/04/23 06:11:13 (permalink)
AHowes
Update with board temps showing? Is that load voltage?

Heres mine.





Nice! I'll have to see if I can post mine...I don't think it's as good as yours...the PX1 scanner says 112+ to the GPU...I'm doing about 800MHz on the memory ..I haven't tried higher
 

AMD Ryzen 7900x3d
Deepcool LT720
Gigabyte Aorus Elite AX X670 (Might change..don't like this board)
eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it)
Asus ROG Swift PG43UQ 4k Monitor
eVGA 1600W Supernova T2 PSU
32GB Kingston 6000 DDR5 (2x16GB) Fury
Corsair MP600 Pro 2TB (Boot)
Corsair MP600 2TB (Games/Data)
Phanteks P500A Case
 
#57
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile