sym30l1c
New Member
- Total Posts : 48
- Reward points : 0
- Joined: 2018/11/19 12:54:59
- Status: offline
- Ribbons : 1
Re: 2080ti ftw3 overclocking
2019/03/09 06:00:24
(permalink)
Well, you folks are lucky. I can't get anywhere near the results some people have. I can push it up to 2055MHz sometimes 2070MHz only under certain conditions: max power, max voltage, max fan speed (all fans, i.e. GPU + case fans), which is unrealistic because it's too noisy.
For normal use I get a stable overclock at around +70 core +700 memory (although I usually keep it slightly lower) and I can barely go above 2000MHz.
SPECS: AMD 2700x, ASUS Crosshair VII Hero, G-SKILL Trident 16GB 3200MHz, EVGA 2080TI FTW3 Ultra
|
Kristeve01
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2018/11/30 08:20:33
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/09 06:08:45
(permalink)
sym30l1c
Well, you folks are lucky. I can't get anywhere near the results some people have. I can push it up to 2055MHz sometimes 2070MHz only under certain conditions: max power, max voltage, max fan speed (all fans, i.e. GPU + case fans), which is unrealistic because it's too noisy.
For normal use I get a stable overclock at around +70 core +700 memory (although I usually keep it slightly lower) and I can barely go above 2000MHz.
Don't know if it makes you feel any better,. But I'm on water and see about the same limits you're dealing with.... Lol
|
murlo26
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2014/07/16 20:44:06
- Status: offline
- Ribbons : 1
Re: 2080ti ftw3 overclocking
2019/03/09 10:48:57
(permalink)
Honestly, I think most people's version of "stable" is making it through a benchmark from what I have seen. I have done +135 and +1050 mem on a benchmark with fans etc at 100% but for most games it's more like +115/+800. And then there is Apex which has so many problems I feel like my computer is broken and don't run any OC lol.
CPU: 13900k w/EK Velocity2 MOBO: Z690 Kingpin RAM: Teamgroup T_Force 7200MHz CL34 GPU: Gigabyte 4090 Gaming OC w/ EK Quantum Vector2 PowerSupply: MSI MEG Ai1300P Aquacomputer Highflow Next EK 360mm P Rad, EK 360 X Rad, EK G1 Distroplate LianLI AL120 Fans LianLi O11 XL Case
|
bettc
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2019/03/10 00:03:30
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 00:44:07
(permalink)
spye435
So this is where I'm at:
Power, temp and voltage at max.
Clock + 130
Memory + 900
Not an overclocker by any means. @spye435, i have mine set at +215 core, +1050mem in Afterburner and i don't get anywhere near that score. Does that mean my card is maxing out way before it hits those speeds? 12,062 combined score 15,116 graphics score 5,625 cpu score
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 01:00:56
(permalink)
bettc
spye435
So this is where I'm at:
Power, temp and voltage at max.
Clock + 130
Memory + 900
Not an overclocker by any means. @spye435, i have mine set at +215 core, +1050mem in Afterburner and i don't get anywhere near that score. Does that mean my card is maxing out way before it hits those speeds?
12,062 combined score
15,116 graphics score
5,625 cpu score
Afterburner only controls one fan, so you may be getting temp throttled hard. I was getting 75-80 in ac odyssey using afterburner, rarely hit 60 with px1
|
bettc
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2019/03/10 00:03:30
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 01:07:05
(permalink)
that is so weird, so only 1 of the two fans speeds up? i have an EVGA Black btw, was just reading up on overclocking in the EVGA range
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 01:28:46
(permalink)
bettc
that is so weird, so only 1 of the two fans speeds up? i have an EVGA Black btw, was just reading up on overclocking in the EVGA range
Yea, msi runs the fans in series, no individual control. So it only controls 1 fan typically Also, most of the cards in this thread are FTW3 so we have a much higher starting point then the black edition. That's probably some of the difference.
|
d0x360
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2019/02/13 10:59:04
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 03:23:59
(permalink)
I'm only getting about +100 clock which is pretty sad for a card this expensive. My gtx 1080 Fe would get +300 clock and +600 memory and never throttle.
|
bettc
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2019/03/10 00:03:30
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 04:14:12
(permalink)
i see what you mean, the FTW3 comes with much higher base clocks. didnt mean to bomb the thread, just mucking about
|
d0x360
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2019/02/13 10:59:04
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 04:40:13
(permalink)
bettc
i see what you mean, the FTW3 comes with much higher base clocks. didnt mean to bomb the thread, just mucking about
I know it does so I get why I can't go much higher but it's base clock is something that even the FE can hit. You would expect a card that's so... Robust would have more headroom for overclocking. I should have just bought a black edition. Don't get me wrong I love the card and knew what I was getting I just hoped I could push it a little further.
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 04:47:13
(permalink)
bettc
i see what you mean, the FTW3 comes with much higher base clocks. didnt mean to bomb the thread, just mucking about
Ooh no it's fine. The new GPU boost setup is just confusing at first
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: 2080ti ftw3 overclocking
2019/03/10 05:49:58
(permalink)
d0x360
I'm only getting about +100 clock which is pretty sad for a card this expensive. My gtx 1080 Fe would get +300 clock and +600 memory and never throttle.
You can't compare apples and oranges. One has a lower TDP than the other and one has higher torque and horsepower already at the starting point than the other.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
bettc
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2019/03/10 00:03:30
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/10 06:04:27
(permalink)
found the limits for me are at +265 core, +1210 memory.
still a 1000 pts off spye's gfx score in timespy. seems weird, thats only < 60mhz on the core and > 310 mhz on the mem
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: 2080ti ftw3 overclocking
2019/03/11 01:06:18
(permalink)
bettc
found the limits for me are at +265 core, +1210 memory.
still a 1000 pts off spye's gfx score in timespy. seems weird, thats only < 60mhz on the core and > 310 mhz on the mem
+265 on the core? I'm surprised that's not crashing...
 Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
bettc
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2019/03/10 00:03:30
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/11 01:07:43
(permalink)
EVGA Black, not an FTW3. otherwise yeah, that would be crashing
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: 2080ti ftw3 overclocking
2019/03/11 03:09:43
(permalink)
Are these cards voltage limited thermally also? It seems once I hit 60C I can't go above 1.050v...
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
Sphericube
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2019/03/11 05:59:51
- Location: France
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/11 09:01:25
(permalink)
Hello everyone  I am new to EVGA with my first card 2080ti FTW3 and quite happy with its performance. Do you keep any ranking with benchmark results? What are the best Time Spy graphic scores with FTW3? Here is mine: Time Spy graphic : 16 713 
post edited by Sphericube - 2019/03/12 10:06:10
"J'adorerais changer le monde, mais ils ne veulent pas me fournir le code source"
|
alexharis37
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2019/01/17 06:32:39
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/12 01:24:06
(permalink)
sym30l1c
Well, you folks are lucky. I can't get anywhere near the results some people have. I can push it up to 2055MHz sometimes 2070MHz only under certain conditions: max power, max voltage, max fan speed (all fans, i.e. GPU + case fans), which is unrealistic because it's too noisy.
For normal use I get a stable overclock at around +70 core +700 memory (although I usually keep it slightly lower) and I can barely go above 2000MHz.
same but without touching voltage or fan speed :/ My FTW3 can't go over 2070. I noticed that:  noelshack.com/2019-11-1-1552329100-capture3.jpg Don't know if it's related but strangely it showed the limit around 2070mhz...
|
Graphite8five
SSC Member
- Total Posts : 660
- Reward points : 0
- Joined: 2016/08/04 22:27:09
- Status: offline
- Ribbons : 3
Re: 2080ti ftw3 overclocking
2019/03/26 21:08:40
(permalink)
The only way these will get 2100Mhz+ is on water it appears... I can briefly hit 2100Mhz in the 50-54C range but once I get to 57-60C I'm limited to 2055-2085Mhz, depending on the how the game responds to the overclock, each game responds differently...
Maximus XI Hero, 8700K 5Ghz delid, EKWB Custom loop ,Dominator RGB 3400Mhz 16GB, EVGA 2080 Ti FTW3 EK Vector, Seasonic Prime Platinum 1300W, Asus PG349Q 34" 120hz G-Sync, Phanteks Eclipse P600S.
|
catnlew
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2012/01/13 10:12:14
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/27 07:43:08
(permalink)
Just to thrown in my two cents: I have a 2080ti FTW3 Ultra
Silicon lottery is definitely a thing! Without overclocking, the card boosts regularly to 2025 mhz. OC scanner gave it a 90, which it can reach, with a memory of +1000. This would give me regular boosts to 2100, but beyond that was unstable. So I decided to leave it without overclocking for now as framerates are fine in the games that I do play. In the meantime, I am putting together a watercooling build. Wish me luck as I just got the hydrocopper water block and am going to try to convert the card over... have heard some stories...
Associate Code: ZXZVX1TOLFK8HXK Lian Li Pc-011 Dynamic I9-9900 K (4.8 ghz) ASrock Z390 Taichi UltimateCorsair H115i Platinum Corsair Dominator 3200 RAM 32GBeVGA 2080ti FTW Ultra 3Samsung 970 EVO M2 SSD x 2Seasonic Titanium Focus 850 WAcer Predator G-Sync x 3 (1x3: 5780x1080) --with racing cockpit Windows 10
|
LukePay
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2019/01/07 13:05:36
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/27 16:58:02
(permalink)
+200 or 120 etc doesn't really mean much when gpu boost does its thing.. Clock speeds please.. My air cooled card will hit 2175 when cold for a few seconds and then slowly clock down to around 2145_2085 depending on temps. I can only get +500 on the memory (micron). Planning on watercooling it once the ek blocks comes out I'm wondering what speeds it will hold then.
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/27 17:54:55
(permalink)
Graphite8five
The only way these will get 2100Mhz+ is on water it appears... I can briefly hit 2100Mhz in the 50-54C range but once I get to 57-60C I'm limited to 2055-2085Mhz, depending on the how the game responds to the overclock, each game responds differently...
Silicon lottery is at play big time. My first card that sadly had to be rma'd would hit 2160 and in game at higher temps clock down to 2130, new one hits 2145 but clocks down to 2100-2085 in game
|
vivian54
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2015/09/06 13:15:51
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/29 16:54:07
(permalink)
My bad for me, my 2080ti ftw3 ultra stable max gpu clock +60mhz :( my last 2080ti black edition take +130 with no problem
|
xblackvalorx
iCX Member
- Total Posts : 451
- Reward points : 0
- Joined: 2017/12/04 19:13:09
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/29 17:02:15
(permalink)
vivian54
My bad for me, my 2080ti ftw3 ultra stable max gpu clock +60mhz :( my last 2080ti black edition take +130 with no problem
But you start at a way higher base with the ftw, so +60 is likely a lot higher end clock then 130 on a black
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: 2080ti ftw3 overclocking
2019/03/29 18:49:52
(permalink)
xblackvalorx
vivian54
My bad for me, my 2080ti ftw3 ultra stable max gpu clock +60mhz :( my last 2080ti black edition take +130 with no problem
But you start at a way higher base with the ftw, so +60 is likely a lot higher end clock then 130 on a black
I believe this is correct.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
vivian54
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2015/09/06 13:15:51
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/03/31 17:05:56
(permalink)
Yes but ftw stay 1995mhz on game and Black 2095mhz but sillicon lottery and 2 3% impact :)
|
rodarkone
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2016/02/02 12:56:57
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/04/02 17:17:53
(permalink)
The offset is not relevant at all as the baseline can differ quite significantly
EX:
card 1 .. max offest +95 - actual GPU frequency 2115 (so by default this board is sitting nicely around 2020 MHz without any tweak or increase in vcore) ->
card 2 .. max offset +145 - actual GPU frequency 2070 (this card sits around 1975) ->
Does the extra 50 MHz count in the default -- probably not (is like 2% ) but still is out of the box
So ignore the "offset" (+xx) what it matters is the actual GPU frequency you hit at the end of the day.
PS: unfortunately the card 1 is "sick" the pump is causing an extremely iritating noise while idle (also please don't compare the 2 scores - there are 2 different platforms there, I am too lasy to remove my current card and replace it with card #2 so I tested on my opened bench :D
|
alexguy2626
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2019/03/23 12:04:41
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/04/11 04:29:08
(permalink)
I run at 2050mhz playing td2 all day, doesn't seem to matter if i push the +core higher thats where it likes to stay. People should be posting that number instead of +core. It starts out higher but after 30mins it drops to 2085-2050 but its very stable my offset is +90 but i don't think that matters much.
post edited by alexguy2626 - 2019/04/11 04:35:29
|
20190732820197
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2019/05/11 08:19:58
- Status: offline
- Ribbons : 0
Re: 2080ti ftw3 overclocking
2019/05/23 19:28:04
(permalink)
I got 160 on core and 1400 on men stable but card will not go past 2115. Anyone know why?
|
jasoncodispoti
SSC Member
- Total Posts : 628
- Reward points : 0
- Joined: 2013/03/18 14:40:28
- Location: Nashville, TN
- Status: offline
- Ribbons : 14
Re: 2080ti ftw3 overclocking
2019/05/23 19:49:55
(permalink)
I can hit 2160MHz with Time Spy and Fire Strike Extreme at 1.093v on my EVGA 2080ti FTW3 Ultra Hydro Copper. I have to keep GPU temperature below 50c to be able to run at 2160MHz. Between 50c and 60c I can only run 2145MHz.
post edited by jasoncodispoti - 2019/05/23 19:51:58
Intel Core i7-9800x | EVGA X299 Dark| EVGA RTX 2080ti FTW3 Ultra HydroCopper | 32GB Corsair Dominator Platinum | EKWB Liquid Cooled Loop | Phanteks Enthoo Primo SE | EVGA SuperNOVA 1000 P2 
|