EVGA

Hot!2080ti Kingpin Question

Page: 12 > Showing page 1 of 2
Author
Dougall88
New Member
  • Total Posts : 18
  • Reward points : 0
  • Joined: 2019/11/21 16:00:45
  • Status: offline
  • Ribbons : 0
2019/11/21 21:06:34 (permalink)
.
post edited by Dougall88 - 2019/11/22 12:44:55
#1

37 Replies Related Threads

    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/21 23:07:44 (permalink)
    The fan1 in px1 is the vrm fan, fan 2 in px1 is both radiator fans (connected with Y cable) and fan 3 in px1 is the external fan header on the end of the card. (Will show 0 unless hooked to a fan) but it does seem like the stock fans are 1800 or 2000 rpm fans though.
    post edited by altonadavid - 2019/11/21 23:15:44
    #2
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 02:11:30 (permalink)
    You can also hook up your radiator fans 1 at a time and see if they both perform the same as far as rpms or if one may be faulty. Also the default max fan speeds is different within the bios, the OC bios will allow fans to run faster than the normal bios, but the only way to get 100% fan speeds for all the fans is to flash the ln2 bios into the OC bios position, by doing that you get max speeds but still maintain the voltage and heat protection. Also make sure your firmware is the newest, open px1 then click the little circle in the lower right corner by the version, when that opens click where it says update, then another window will open with firmware files, the newest version for the Kingpin is the e200-fa42 file. Here is the goodies link if you don't have it.
    https://xdevs.com/guide/2080ti_kpe/
    post edited by altonadavid - 2019/11/22 02:13:34
    #3
    AHowes
    CLASSIFIED ULTRA Member
    • Total Posts : 5918
    • Reward points : 0
    • Joined: 2005/09/20 15:38:10
    • Location: Macomb MI
    • Status: offline
    • Ribbons : 19
    Re: 2080ti Kingpin Question 2019/11/22 06:17:26 (permalink)
    A+.. right on with all that info!

    Enjoy your beast of a card!

    Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
    Asus Z390 ROG Extreme XI MB
    G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
    EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
    34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
    Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
    #4
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:14:15 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:45:42
    #5
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:17:32 (permalink)
    You might want to do a total px1 uninstall and cleanup then and reinstall it, sounds like the install is corrupt. You tried to flash the bios or firmware?
    #6
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:18:06 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:46:28
    #7
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:22:57 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:46:39
    #8
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:26:54 (permalink)
    So you got the firmware updated?
    #9
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:27:17 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:46:53
    #10
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:28:38 (permalink)
    Ok so what are you getting the save error with?
    #11
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:31:35 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:47:08
    #12
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:34:44 (permalink)
    When you try and open px1 you get that?
    #13
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:36:54 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:47:23
    #14
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:37:55 (permalink)
    Ok gotcha, so are your fans working properly now?
    #15
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:38:46 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:47:36
    #16
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:40:27 (permalink)
    Have you hooked up each fan separate to see if they both do that?
    #17
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:42:12 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:47:55
    #18
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:44:53 (permalink)
    And now you have the ln2 bios saved and your trying to get them flashed to OC bios position?
    #19
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:51:26 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:48:07
    #20
    altonadavid
    New Member
    • Total Posts : 81
    • Reward points : 0
    • Joined: 2018/10/23 17:56:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:54:43 (permalink)
    Ok well I'm away from the house for a few days and don't have the nvflash directions with me so hopefully someone else can jump in now and help out
    #21
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 08:58:43 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 12:48:26
    #22
    AHowes
    CLASSIFIED ULTRA Member
    • Total Posts : 5918
    • Reward points : 0
    • Joined: 2005/09/20 15:38:10
    • Location: Macomb MI
    • Status: offline
    • Ribbons : 19
    Re: 2080ti Kingpin Question 2019/11/22 09:34:25 (permalink)
    Dougall88
    Yah thats cool, if anyone got the directions that would be great


    Here ya go.. from Sajin.

    https://forums.evga.com/m.m.aspx?m=2360712&p=2

    Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
    Asus Z390 ROG Extreme XI MB
    G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
    EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
    34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
    Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
    #23
    AHowes
    CLASSIFIED ULTRA Member
    • Total Posts : 5918
    • Reward points : 0
    • Joined: 2005/09/20 15:38:10
    • Location: Macomb MI
    • Status: offline
    • Ribbons : 19
    Re: 2080ti Kingpin Question 2019/11/22 09:40:54 (permalink)
    To make it much easier.. just make a folder under the c drive. Call it bios. Put your files in there.

    Open the command prompt. Type cd.. hit enter. Do it again cd .. hit enter. That till ya get down to the c:/ drive.

    Then type cd bios and hit enter to open the bios folder.

    Then do the string to backup the bios first. Then the unlock string. Then when that's successful go with the flash.

    Shut down the system. And remove the plug from the psu. Hold down the power button on the pc for 15-20 secs to full drain the mb caps to drain all power. Then plug the psu back in and boot.

    Px1 might not see the change in bios. If not your need to uninstall px1 and reboot. Reinstall px1 and see if you see the new bios change with the higher card fans.

    Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
    Asus Z390 ROG Extreme XI MB
    G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
    EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
    34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
    Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
    #24
    Sajin
    EVGA Forum Moderator
    • Total Posts : 41251
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 197
    Re: 2080ti Kingpin Question 2019/11/22 11:38:06 (permalink)
    The easiest way to flash the vbios would be to just drag and drop the .rom file onto the nvflash64.exe. 

    Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
     

     
    #25
    GTXJackBauer
    Omnipotent Enthusiast
    • Total Posts : 8191
    • Reward points : 0
    • Joined: 2010/04/19 22:23:25
    • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
    • Status: offline
    • Ribbons : 42
    Re: 2080ti Kingpin Question 2019/11/22 12:48:51 (permalink)
    Dougall88
    got it. can i get post removed?




    I would have left all your messages to help others in the same predicament
     
    BC, is that you on a new account?



    Use this Associate Code at your checkouts, to get 5%-10% discounts on all your EVGA purchases:
    LMD3DNZM9LGK8GJ
    *Thanks for your support!*
    Use this Rewards Code below when registering your EVGA products. 
    (Invoice needs to be uploaded.)
    #26
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 12:50:27 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 17:28:26
    #27
    Dougall88
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2019/11/21 16:00:45
    • Status: offline
    • Ribbons : 0
    Re: 2080ti Kingpin Question 2019/11/22 12:51:29 (permalink)
    .
    post edited by Dougall88 - 2019/11/22 17:28:40
    #28
    GTXJackBauer
    Omnipotent Enthusiast
    • Total Posts : 8191
    • Reward points : 0
    • Joined: 2010/04/19 22:23:25
    • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
    • Status: offline
    • Ribbons : 42
    Re: 2080ti Kingpin Question 2019/11/22 13:44:29 (permalink)
    Dougall88
    Been using evga products forever tho just didnt post on forums. This doesnt void the warranty right?




    If its a factory VBIOS nope.  If it is a 3rd party, you would need to put the VBIOS the way the GPU came for RMA otherwise yes, it would be invalid.

    Use this Associate Code at your checkouts, to get 5%-10% discounts on all your EVGA purchases:
    LMD3DNZM9LGK8GJ
    *Thanks for your support!*
    Use this Rewards Code below when registering your EVGA products. 
    (Invoice needs to be uploaded.)
    #29
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 22886
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 117
    Re: 2080ti Kingpin Question 2019/11/22 14:18:48 (permalink)
    GTXJackBauer
    Dougall88
    got it. can i get post removed?




    I would have left all your messages to help others in the same predicament
     


     
    Exactly ...
     
    EVGA Forums Does Not remove Posts - that are within Terms of Use
     
    Any Mod can lock a Thread if OP requests
     
    We leave them up as others can learn from what others have asked

    RTX Project EVGA X99 FTWK-5930K 2xEVGA2080Ti EVGA-1200P2  Nibbler EVGA X99 3-GPU Water Loop 1600P2  AIO Folding  X99 2x1080Ti FTW3 Hybrid, 1200P
    Thank You for Your Support


    #30
    Page: 12 > Showing page 1 of 2
    Jump to:
  • Back to Mobile