EVGA RTX 2080 Ti FTW3 Ultra, if I load GPU-Z (tried 2.26, 2.32 & 2.36) with the bios in normal or oc GPU-Z shows rows: Fan 1 Speed (%), Fan 1 (RAM), Fan 2 Speed (%), Fan 2 (RPM) and no 3rd fan. Fan 2 (RPM) reads whatever Fan 1 (RPM) reads and FAN 2 (%) is completely wrong usually 20-60%. During this time Precision X1 shows all 3 fans properly.
 
If I set the fans in Precision X1 to static any % and then load GPU-Z it then shows rows: Fan Speed (%), Fan Speed (RPM), EVGA iCX Middle Fan and EVGA iCX Right Fan and shows all 3 fans and their readings correctly.
 
My 1080 Ti FTW3 does not act like this, if fan 1 is 20% and other 2 fans are 0% is always shows the iCX fans at 0 rpm and never some incorrect "FAN 2" with wrong readings.
 
I've also had Precision X1 show only 2 fans the odd time but I restart it and it's fine.
 
Is this normal for 2080 Ti FTW3 Ultra?