direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/21 23:43:58
(permalink)
Increasing VCore made it even less stable so bumped VCore back down a notch, since my RAM is at 7-8-7-20 I bumped VTT to +250mV (1.45V)... retesting.......
 “The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/22 00:40:10
(permalink)
Sigh... gonna be a long night >.<
Looks like I"ll have to redo my OC all over again... what a PITA lol
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/22 00:44:47
(permalink)
Sorry to hear that... Why not go back to the xms?
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/22 10:21:54
(permalink)
rafale
Sorry to hear that... Why not go back to the xms?
XMS3 couldn't hold even a LinX test at factory timings (8-8-8-24), now I'm trying to test the Dominators at factory settings (7-8-7-20) to see if it can hold it. So far it's been lasting longer on test runs than the XMS3 on its factory timings. I just need to make a few more adjustments. Keep getting LinX errors at around 11-14 runs 
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club
2011/04/22 17:19:59
(permalink)
Hmm.. problem here too. No hard lock or BSOD, but LinX stops itself after about 9 runs. Kind of hard to know what the exact issue is...
|
G__ROW
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2008/04/27 19:16:26
- Status: offline
- Ribbons : 0
Re:X58 Stability Club
2011/04/22 17:33:43
(permalink)
Stops because of errors? try bumping your vcore up 1 notch.
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/22 18:27:48
(permalink)
Yep, bumped VCore up a notch again with lowered VTT and QPI... finally ran 20 passes stable! And now the hard part... getting Prime95 to be stable 24 hours on blend... Looks like the entire time my VTT + QPI PLL were too high. Downside is my GFlops took a nose dive
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club
2011/04/22 18:50:05
(permalink)
Bumped it a big notch lol.. 1.31 load so I bumped it up to 1.329.. thought I might be overdoing it, but just completed 20+ runs without a problem, although ran a little hotter with the higher voltage. Will post it up shortly. Prime 95 wasn't a problem, it was LinX that seemed to push it harder. I guess because LinX does more ram than P95.. depending which test you run.
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/22 19:03:56
(permalink)
Nereus CPU : i7-930 Batch # : 3002A582 CPU clock : 4.21GHz (200.5 x 21) Voltage : 1.329 Idle temps : 41, 41, 41, 37 Load temps : 75, 75, 72, 70 GFlop peak : 54.7288 VDroop ON / HT ON / Turbo OFF 
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/22 19:11:40
(permalink)
Temps are a bit higher than normal btw.. today was a bit warmer than it has been, but the building super has the heating cranked right up for some reason, and we can't control it.. sitting here in t-shirt and shorts just about breaking a sweat :P
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/22 19:59:05
(permalink)
Wow Neureus... you're on air and you got way better temps than me and I'm using the Kuhler 620  BTW I reran LinX and put it on 50 passes this time to guarantee stability but crashed before 20 passes... on the same exact settings I used when I passed 20 just a few hours ago... sigh (BSOD D1) My QPI, VTT, and RAM just don't seem to get along. Last resort, bump the DIMM Voltage up a bit... *prays*
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/22 20:44:19
(permalink)
I'm on water dude.. lol, that's why I mentioned temps being high  If that was on air, I'd think my sensors were faulty heh.
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/22 21:01:12
(permalink)
Nereus
I'm on water dude.. lol, that's why I mentioned temps being high If that was on air, I'd think my sensors were faulty heh.
I was looking at your ModsRigs and saw the big MegaShadow cooler lol
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/22 21:29:11
(permalink)
Ahh of course.. yeah that's my old rig :-) I have a Mountain Mods case and all the watery goodness that goes with it now.. recently completed the build. Will take some pics and upload to ModsRigs this w/end if I have time - thanks for reminding me.
|
rurik
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2010/10/10 02:19:36
- Location: Estonia
- Status: offline
- Ribbons : 0
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 01:25:16
(permalink)
 CPU : i7-930 CPU clock : 4.21GHz (200.5 x 21) Voltage : 1.35625 Idle temps : 43, 38, 42, 39 Load temps : 84, 81, 79, 77 GFlop peak : 53.3391 VDroop ON / HT ON / Turbo OFF Finaly I made it. one week of investigation. temp is litle more high as usual,but ...
i7 930 @ 4.2 HT ON--Evga Classified x58 E759--6Gb Corsair Dominator 1600 Cl8--Club3D GTX570 stock--SSD Corsair F60 system--640Gb WD Caviar Black games--2x2Tb Hitachi 7200 torrent--250Gb seagate SATA2 trash--DVDRW LG--PSU 850W Seasonic--Full Tower Thermaltake Xaser VI--Windows7 x64 RTM--Cooled by H2O 
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 02:22:24
(permalink)
@ rurik, you probably have Speed Step on right? Shows your CPU is at 2.4GHz idle
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
justin_43
CLASSIFIED Member
- Total Posts : 3086
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 7
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 02:26:07
(permalink)
direraptor22
@ rurik, you probably have Speed Step on right? Shows your CPU is at 2.4GHz idle
I was just going to say the same thing. Definitely retest sans-speed step. BTW...out of curiosity, what language is that?
ASUS RTX 4090 TUF OC • Intel Core i7 12700K • MSI Z690 Edge WiFi • 32GB G.Skill Trident Z • EVGA 1600T2 PSU 3x 2TB Samsung 980 Pros in RAID 0 • 250GB Samsung 980 Pro • 2x WD 2TB Blacks in RAID 0 • Lian-Li PC-D600WB EK Quantum Velocity • EK Quantum Vector² • EK Quantum Kinetic TBE 200 D5 • 2x Alphacool 420mm Rads LG CX 48" • 2x Wasabi Mango UHD430s 43" • HP LP3065 30" • Ducky Shine 7 Blackout • Logitech MX Master Sennheiser HD660S w/ XLR • Creative SB X-Fi Titanium HD • Drop + THX AAA 789 • DarkVoice 336SE OTL
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 02:27:31
(permalink)
jethc9
direraptor22
@ rurik, you probably have Speed Step on right? Shows your CPU is at 2.4GHz idle
I was just going to say the same thing. Definitely retest sans-speed step. BTW...out of curiosity, what language is that?
Russian?  It's a badass language and the characters look wicked hehe
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
justin_43
CLASSIFIED Member
- Total Posts : 3086
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 7
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 02:28:53
(permalink)
direraptor22
jethc9
direraptor22
@ rurik, you probably have Speed Step on right? Shows your CPU is at 2.4GHz idle
I was just going to say the same thing. Definitely retest sans-speed step. BTW...out of curiosity, what language is that?
Russian? It's a badass language and the characters look wicked hehe
 Nice! The characters are pretty badass!
ASUS RTX 4090 TUF OC • Intel Core i7 12700K • MSI Z690 Edge WiFi • 32GB G.Skill Trident Z • EVGA 1600T2 PSU 3x 2TB Samsung 980 Pros in RAID 0 • 250GB Samsung 980 Pro • 2x WD 2TB Blacks in RAID 0 • Lian-Li PC-D600WB EK Quantum Velocity • EK Quantum Vector² • EK Quantum Kinetic TBE 200 D5 • 2x Alphacool 420mm Rads LG CX 48" • 2x Wasabi Mango UHD430s 43" • HP LP3065 30" • Ducky Shine 7 Blackout • Logitech MX Master Sennheiser HD660S w/ XLR • Creative SB X-Fi Titanium HD • Drop + THX AAA 789 • DarkVoice 336SE OTL
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 02:31:20
(permalink)
... Ahh you Americans... Yeah it looks like russian and they use cyrillic characters. i.e Greek while English uses the latin alphabet.
I do my tests with speedstep on as well by the way but I have IBT run in the background when I take the screenshot to make sure my CPU is running at its max clock.
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 02:32:29
(permalink)
lol I only recognized it cuz the flight sims I play have Russian combat aircrafts in them and the HUD/cockpit instruments are covered in Russian text xD
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
justin_43
CLASSIFIED Member
- Total Posts : 3086
- Reward points : 0
- Joined: 2008/01/04 18:54:42
- Status: offline
- Ribbons : 7
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 02:37:46
(permalink)
rafale
... Ahh you Americans... Yeah it looks like russian and they use cyrillic characters. i.e Greek while English uses the latin alphabet.
I do my tests with speedstep on as well by the way but I have IBT run in the background when I take the screenshot to make sure my CPU is running at its max clock.
LOL... Sorry for my non-english ignorance. You learn something new everyday! Also rafale, thanks again for the 970 you sold me. The more I play with it, the more I like it! Looks like you got your 980x performing well now too! Awesome bro!
ASUS RTX 4090 TUF OC • Intel Core i7 12700K • MSI Z690 Edge WiFi • 32GB G.Skill Trident Z • EVGA 1600T2 PSU 3x 2TB Samsung 980 Pros in RAID 0 • 250GB Samsung 980 Pro • 2x WD 2TB Blacks in RAID 0 • Lian-Li PC-D600WB EK Quantum Velocity • EK Quantum Vector² • EK Quantum Kinetic TBE 200 D5 • 2x Alphacool 420mm Rads LG CX 48" • 2x Wasabi Mango UHD430s 43" • HP LP3065 30" • Ducky Shine 7 Blackout • Logitech MX Master Sennheiser HD660S w/ XLR • Creative SB X-Fi Titanium HD • Drop + THX AAA 789 • DarkVoice 336SE OTL
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 07:24:45
(permalink)
rurik, your screenshot needs to include the following and it must show the correct clock speed. 2. CPU-Z front tab showing your overclock, voltage, and threads. CPU-Z can be downloaded here: http://www.cpuid.com/softwares/cpu-z.html
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 09:41:40
(permalink)
Doh! doesn't quite fit in my sig space.. might have to customize it a little. ..edit.. hey sweet.. the png has transparency - if you view the badge on a black background it looks pretty good too! 
post edited by Nereus - 2011/04/23 09:50:49
|
rurik
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2010/10/10 02:19:36
- Location: Estonia
- Status: offline
- Ribbons : 0
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 11:53:38
(permalink)
kram36
what's the problem? what did I do wrong?
i7 930 @ 4.2 HT ON--Evga Classified x58 E759--6Gb Corsair Dominator 1600 Cl8--Club3D GTX570 stock--SSD Corsair F60 system--640Gb WD Caviar Black games--2x2Tb Hitachi 7200 torrent--250Gb seagate SATA2 trash--DVDRW LG--PSU 850W Seasonic--Full Tower Thermaltake Xaser VI--Windows7 x64 RTM--Cooled by H2O
|
hansvanleen
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2009/03/24 13:54:36
- Status: offline
- Ribbons : 0
Re:X58 Stability Club
2011/04/23 11:58:22
(permalink)
Hello everyone
Can someone tell why Linux saying that I have not enough virtial memory, I cant put it on 25000 can some one tell me why. And what is HT it's on in bios or I have to use 21 multiplier?
Thanks
 Coolermaster HF 932 ASUS Rampage Extreme 3 Windows 7 Profesional 64 bit Mushkin Redline 1688 mhz 6-8-6 24 1.65 Core I7 920 do stepping 4.2 ghz vcore 1.30 v vvt 150 mv Antec 1200 true powersupply EK supreme nickel watercooling pomp 655 liang Creative x_fi Fatality titanium champion Nesteq Fan max Intel 510 120 GB SSD EVGA GTX 275 SSC 2 1 tb WD Caviar Black running in Raid 0 Dell sp2309 sp 23 inch
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club
2011/04/23 12:19:24
(permalink)
hansvanleen
Hello everyone
Can someone tell why Linux saying that I have not enough virtial memory, I cant put it on 25000 can some one tell me why. And what is HT it's on in bios or I have to use 21 multiplier?
Thanks
How much memory do you have? Your sig does not say. LinX at 25000 should use about 4.8Ghz of RAM apparently. If you have 6Ghz of RAM, it may be just short if you have other processes running. Shut down browsers, sidebar gadgets, antivirus etc (basically anything other than what is required for this benchmark) - that should free up a little more RAM and you should be ok (assuming you have 6GB of RAM installed). HT is hyper threading.. it's set in the BIOS under frequency/voltage control > CPU feature > Intel HT Technology
post edited by Nereus - 2011/04/23 12:22:22
|
Nereus
Captain Goodvibes
- Total Posts : 18192
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/23 12:23:48
(permalink)
rurik
kram36
what's the problem? what did I do wrong?
Rurik, your CPU-Z window (or EVGA E-Leet - same thing basically) is showing the information in the voltage tab. It should be showing the CPU tab. Check out some other member's screen shots and you'll see what I mean.
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/23 12:29:22
(permalink)
hansvanleen
Hello everyone
Can someone tell why Linux saying that I have not enough virtial memory, I cant put it on 25000 can some one tell me why. And what is HT it's on in bios or I have to use 21 multiplier?
Thanks
Not sure what you are asking on the multiplier. Maybe you should read the OC guide thread. Enable Hyperthreading in the BIOS for this test. rurik
kram36
what's the problem? what did I do wrong?
Look at your picture, It is showing your CPU speed at only 2400MHz. This is because your CPU was idle when you took the picture. You need to either run another CPU loading program in the background like LinX or Prime95 at the time you do the print screen or disable Speedstep in your BIOS. You must also show the CPU Tab of E-leet or use CPU-Z as Kram suggested. You are showing the voltage tab of E-leet...
|