It's time I posted my rig after putting the 762 in.  Got it for my birthday, I love it.  Also I redid some things in my WC loop to function and look better, such as the pump placement with SATA cables wrapped around the tube.  Oh and I got the sleeved extensions from Performance-PCs, they're made by NZXT.
 
Specs:
i7 930 @ 4.2Ghz 1.35V
Corsair Dominator GT 2000 @ 2000Mhz 7-9-7-21 1.65V
EVGA GTX 295 Dual PCB @ 702/1588/1202 1050mV(retested)
EVGA E762 4 Way SLI Classified
Cooler Master Cosmos S with window
Western Digital 1TB Caviar Black
Cooler Master R4 Red LED fans
Four Scythe Ultra Kaze Fans in pull
ABS Tagan BZ1100W PSU
NZXT black single sleeved extensions
 
Liquid Cooling:
HWlabs Black Ice GTX 480 Radiator
EK HF Supreme CPU Waterblock Full Nickle
EK FC-295GTX Acetal/Nickle
EK Matte Black Compression Fittings
Bitspower Angle Adapters
Primochill Black 7/16"ID 5/8"OD tubing
Laing DDC 18W version
Watercool Top
Lamptron FC-2 Fan Controller
Bitspower Water Tank Z 250mm version
 
Temps in C:
CPU core 100% load maximums after Cinebench @ 4.2: 62C-57-59-55
GPU cores after 1 hour on MSI Kombuster: GPU 1 - 39, GPU 2 - 38
 
You may notice I don't have a drain line anymore, I removed it to improve the appearance, I can drain it without a drain line. 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
My overall feelings on the build and my goals...
 
Goal... #1 Single GTX 295 worldwide on HWbot. Undoable unless I come across a 980X/970.
 

Q56_Monster 

nateman_doo 

Q?!  say it ain't so?!  booty.  You will be missed.  Congrats anyhow.  I don't see you leaving here any time soon. 

Halo, in your dreams buddy, I still have the top 295 and I will breath new life into it when the time is right ;) 

 

Thanks Nate,   and Halo, aint no way you're prying #1 295 away....if worse comes to worse, Nate's bringing his card over to my house, and he can have the credit 

 
 
Challenge accepted.
 

My feelings? 

emepror

NICE!!!

go for that goal, and have fun while your at it !

 
Thanks! I'm at 49th right now I think. 

Demonik5150

WoW i didnt know it fit in a Cosmos S  very nice !! 

 
Oh I wasn't fully sure how well it would fit, and with where the res is it damn near didn't. It fits by about 2mm width.

XrayMan

I could be mistaken, but I think he loves his GTX 295!      :)

 
Maybe.. I want to cheat on it and get a few 580s though.

Falcon_CMH

Very nice build awesome man!

 
Thanks! Btw it's a good thing your ICD sample got here when it did, just in time for the rebuild. Now using it on my CPU, both GPUs, and the board.

Oh, how very nice.
 
Are you going to bunch up the SATA cables so they're nicely together?
 
+1

Ah, I see what you mean. Maybe the view is a tad distorted in 2D so the video power cables look like they're together with the all the cables under them.

Halo_003

emepror

NICE!!!

go for that goal, and have fun while your at it !

Thanks! I'm at 49th right now I think. 

i smell Q and Nate breakin out the LHe 

Nice clean cut Rig
4-way classy ftw

Wow nice, I have to try those timings on the Dominators as well since I have the same kit as you.

Halo_003

YerBuddy

So very nicely done!

Thanks YB that means a lot coming from a master like you.

The photography is first-rate!  I love that camera.

Halo_003
Thanks! Yeah, highest the can go stable with 7-9-7-21 is about 2150Mhz, and I've only ever gotten them to 2240Mhz, due to CPU IMC limitations, it can't take them higher lol.

 
Im running them just a little less than 2000Mhz so they should do 7-9-7-21 im hoping. I will have to test it out once I get my step up GTX 570. Oh and I love the e762 as well, very nice board.

Retested: http://img140.imageshack.us/img140/1326/93043135v.jpg
 
 
 
I dunno what to make of this CPU, lol..