Motherboard: Evga 4 way SLI 762 Classified  
Chipset block: EK-FB EVGA Classified 4-SLI
CPU Block: EK Supreme HF
All credit goes to AHowes for information and photos provided!

For the above.. From the EK Supreme HF block to the EK 762 4 way MB WB. 
 
From right to left, starting from the top of the CPU block and ending at the top of the MB block.
 
Bitspower G1/4" D-Plug Male / Male Coupler Set - Shiny Silver (About 3/4") (BP-WTP-C07)
1 Bitspower G 1/4" Silver Shiny Dual Rotary 90 Degree IG 1/4" Adapter (BP-90R2)
1 Bitspower Multi-Transfer Base (Coupler) - Set of 2 (BP-WTP-C03)
Bitspower Premium 1" Version Shiny Silver D-Plug Set (BP-WTP-C38)
1 Bitspower Multi-Transfer Base (Coupler) - Set of 2 - Black Matte (BP-MBWP-C03)
2x Bitspower IG1/4" Extender - Black Matte Finish (BP-MBWP-C40)
1 Bitspower G 1/4" Matte Black Dual Rotary 90 Degree IG 1/4" Adapter (BP-MB90R2)
Bitspower G1/4" D-Plug Male / Male Coupler Set - Matte Black (About 3/4") (BP-MBWP-C07)
Bitspower IG1/4" Extender - Black Matte Finish (BP-MBWP-C40) (Hard to see at the bottom) was needed to raise the MB side so its level with the CPU block.
 
NOTE: 
When doing this setup the orintation of the CPU water block. Its upside down so the "IN" port of the CPU block is on the side facing the memory slots. If you have it the other way the "IN' port would be on the other side and the fitting would not reach.. 
 
Motherboard: Evga E760 Classified 3-way SLI
Chipset block: EK-FB EVGA X58 Classified 
CPU Block: EK Supreme HF
All credit goes to AHowes for information and photos provided!


I used: From CPU Block top to the EK MB block top -
 
 Bitspower G 1/4" Silver Shiny Dual Rotary 90 Degree IG 1/4" Adapter (BP-90R2)
Bitspower Multi-Transfer Base (Coupler) - Set of 2 (BP-WTP-C03) 
Bitspower G1/4" Silver Shining IG1/4" Extender (BP-WTP-C40)
Bitspower Multi-Transfer Base (Coupler) - Set of 2 (BP-WTP-C03)
Bitspower G1/4" Silver Shining IG1/4" Extender (BP-WTP-C40)
Bitspower G 1/4" Silver Shiny Dual Rotary 90 Degree IG 1/4" Adapter (BP-90R2) 
Bitspower G1/4" Silver Shining IG1/4" Extender (BP-WTP-C40)
 
NOTE: The last fitting on the mB WB side is a extension used to rise that side so its level with the CPU WB. ALso note when doing this setup the orintation of the CPU water block. Its upside down so the "IN" port of the CPU block is on the side facing the memory slots. If you have it the other way the "IN' port would be on the other side and the fitting would not reach.. also the WB mounting post would be inthe way to go to the other MB WB port.
 
Motherboard:
Chipset block: 
CPU Block:
 
 
 
 
 
 
 
 
 
 
 
 

Looks great.

it seems like (2) rotary 90s and tubing would be much cheaper and easier. and  nicer aesthetically, imo

+1 =)