today i customized the 3D fangrill so it fits on my Coolit Boreas Chiller :
This was how it looks standard :
And after the adjustment, who see the difference ???? lol :tong:
And this is how it going to fit in black and red on the Chiller :
MAt Black acryl bended with a heatgun, for detail for the Boreas chiller on the HDD bays.
now waiting to receive the mobo hopefully this week, or at last beginning next week.
Also a nice toy for OC, the Evga EVbot.
The motherboard (hopefully this week) Mobo SR-2 link info
Nice toy for OC on the mobo : EVbot link info
Only problem is that the case needs a big adjustment for fitting the mobo in the case,
but it will work how i whant it.
i can also use a backplate likes this, but i will keep the original backplate of mobo, but adjust it :
If you look at the sizes of the Classified ATX mobo (30.5 x 26.4cm) against a SR-2 E-ATX (34.6 x 38cm) :
the case will need some adjustments lol.
Mounting for the Boreas Chiller made, was first the HDD trays.
Now made mat black acryl with behind the mounting plates for the boreas chiller.
And still need to finish it nice off and put holes for the cables of the boreas :
the koolanc controller has new connectors, now only small smd-led's in it for some red light and it is finished
now i have 1 koolanc flowsensor, atx power and the internal usb done :
i made already last night some modifications to the tray to fit the mobo,
but the case also needs some modification, and the box to close it over the mobo, needs to be bigger also.
i just can't get it closed completly, look at the pic good :
very small update, making little adjustments on the fan for a little more airflow.
this is how it looked after i changed the outside :
a first little piece is changed, tomorrow will be more :
and this is what we going to change :
Here's the 3d fan grill in primer with the adjustments for a little more airflow, ready to sand again :
the mounting for the Boreas chiller is ready exept for the holes to put the wires and tubing tru :
fan grill got it first paint job , is get dry now :
and the front plate for the drive bays has a primer :
and first paint job in mat black (just fresh, needs to dry) :
front plate drive bays :
cpu are in ta house !!
even the same batch number batch, matched pair
Coolit Freezone Elite is ready to and cpu's are on the mobo ,
And here are some pics of the total view :
today i sleeved the cables for the Evga EVP OC Panel V3,
Also the flat ide cable etc
And made a cable to extend the Connector from the motherboard EVbot in the IO-Shield to the front of the pc :
enjoy the pics :
Here you see the difference between the Classified ECP Panel, and the SR-2 ECP Panel V3 :
Extending cable for the EVbot :
Also did some cables of the coolit coolers and the Psu for it, the ******** Dual bay 650w psu :
Enough MDPC-X sleeving (few hondred meters) ?
changing the connecting on my mobo in 90° angle :
allmost finished, just have to make it nice :
Two koolance 360 rev1.1 , and koolance SR-2 Classified full cover block are arrived :
after received it, let's open up the full cover block SR-2 and change it a little bit :
a lot of sanding it to get the nickel of it, and then the first layer of primer :
first layer mat black is on, tomorrow sanding it and paint it the last time for finishing touch,
after when it's dry mount the block again and put it on the motherboard :
SR-2 full cover block is ready and mounted :
Now i'm again doing little sleeving, and this week making also the 90° angle for the cpu power connectors.
And making a new motherboard cover of the case, it needs to be bigger (bigger mobo then normal fit the case)
pics of what i did today :
from this :
i made these, and a little bit more, only waiting for a new shipment of red connectors :
received package with connectors :
i made this, and have to make more of them for the other cpu and vga power on mobo :
and for the 90° corner of mobo has his place, tru the wall behind the Boreas Chiller, and also the tubing for the little isolated reservoir :
The other cpu his power cable is also done, and the PciE cable also :
Total overview of the powercables on the motherboard, the green circle is where the cables leave the case to the other side for connection to the powersupply :