EVGA

Helpful Reply790i Ultra Stable OC's - If Anyone Is Interested...

Page: 12 > Showing page 1 of 2
Author
Post
Essentials Only Full Version
JeffreyHam
R.I.P. Friend
  • Total Posts : 7737
  • Reward points : 0
  • Joined: 2006/08/08 10:31:07
  • Location: Missouri Ozarks, U.S.A.
  • Status: offline
  • Ribbons : 126
2010/09/28 05:33:47 (permalink)
...I have put together this list of my stable BIOS settings that I have achieved so far. This is not intended as an OC'ing Guide. It's purpose is to show what can be accomplished on the 790i MoBo when you have the proper RAM installed on it. I see many people posting their issues with this board and a great number of them are caused by trying to run improper RAM. Using the right RAM is the key to running with solid stability at whatever speed you desire.
 
This represents many hours of tuning and testing and I hope that it will help those of you that have a similar system. These are all done with my Q9650 Processor (using the stock 9x Mulltiplier) and 4Gb's (2x2) of my Patriot Viper Series Model # PVS34G1600LLK 1600MHz RAM installed in the black slots on my 790i Ultra MoBo. All listed settings have passed both MemTest86+ v4.10 and 20 passes at Max Stress on IBT v2.5. Since I am running on all air cooling, I have not ventured much higher yet. Any higher speeds that I will accomplish after winter gets here (ambient room temp. will be much cooler as I do not heat my computer room) will be added to the list. To save space, I have intentionally left out the settings sections of the BIOS Templates that do not change. HAPPY OC'ing EVERYONE!!!  
  
 
EDIT: My Disclaimer: *Use good common sense and try these settings at your own risk*    
 
3.0GHz (CPU stock)(RAM underclocked)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1333]
Actual FSB (QDR), MHz:[1333]
x MEM (DDR),  MHz:[1333]
Actual MEM (DDR), MHz:[1333]
P1: [Auto]
P2: [Auto]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[6]
tRCD:[6]
tRP:[6]
tRAS:[15]
Command Per Clock: [1T]
 
** Advanced Memory Settings **
tRRD: [Manual] [5]
tRC: [Manual] [34]
tWR: [Manual] [12]
tWTR: [Manual] [16]
tFAW: [Manual] [26]
tREF: [Manual] [7.7uS]
tRFC: [Auto] [74]

**System Voltages**
CPU Core: [Manual] [1.16]
CPU FSB: [Manual] [1.1]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.55]
GTLVREF Lane 0: [Manual] [-30mv] 
GTLVREF Lane 1: [Manual] [-30mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv]
__________________________________________
3.6GHz (CPU OC'd)(RAM stock)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1600]
Actual FSB (QDR), MHz:[1600]
x MEM (DDR),  MHz:[1600]
Actual MEM (DDR), MHz:[1600]
P1: [Auto]
P2: [Auto]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[7]
tRCD:[7]
tRP:[7]
tRAS:[18] *better than the rated 20 which also works*
Command Per Clock: [1T]
 
** Advanced Memory Settings **
tRRD: [Manual] [6]
tRC: [Manual] [41]
tWR: [Manual] [12]
tWTR: [Manual] [18]
tFAW: [Manual] [31]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [88] 
 
**System Voltages**
CPU Core: [Manual] [1.3]
CPU FSB: [Manual] [1.3]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.55]
GTLVREF Lane 0: [Manual] [-50mv] 
GTLVREF Lane 1: [Manual] [-50mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv]
__________________________________________
3.825GHz (CPU OC'd)(RAM OC'd)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1700]
Actual FSB (QDR), MHz:[1700]
x MEM (DDR),  MHz:[1700]
Actual MEM (DDR), MHz:[1700]
P1: [Enabled]
P2: [Enabled]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[7]
tRCD:[7]
tRP:[7]
tRAS:[20]
Command Per Clock: [2T]
 
** Advanced Memory Settings **
tRRD: [Manual] [7]
tRC: [Manual] [44]
tWR: [Manual] [12]
tWTR: [Manual] [19]
tFAW: [Manual] [33]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [94] 
 
**System Voltages**
CPU Core: [Manual] [1.3]
CPU FSB: [Manual] [1.3]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.55]
GTLVREF Lane 0: [Manual] [-50mv] 
GTLVREF Lane 1: [Manual] [-50mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv]
__________________________________________
4.05GHz (CPU OC'd)(RAM OC'd)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1800]
Actual FSB (QDR), MHz:[1800]
x MEM (DDR),  MHz:[1800]
Actual MEM (DDR), MHz:[1800]
P1: [Enabled]
P2: [Enabled]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[8]
tRCD:[8]
tRP:[8]
tRAS:[18]
Command Per Clock: [2T]
 
** Advanced Memory Settings **
tRRD: [Manual] [7]
tRC: [Manual] [46]
tWR: [Manual] [12]
tWTR: [Manual] [19]
tFAW: [Manual] [35]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [100] 
 
**System Voltages**
CPU Core: [Manual] [1.325]
CPU FSB: [Manual] [1.3]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.55]
GTLVREF Lane 0: [Manual] [-50mv] 
GTLVREF Lane 1: [Manual] [-50mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv]
___________________________________________
4.113GHz (CPU OC'd)(RAM OC'd)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1828]
Actual FSB (QDR), MHz:[1828]
x MEM (DDR),  MHz:[1828]
Actual MEM (DDR), MHz:[1828]
P1: [Enabled]
P2: [Enabled]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[8]
tRCD:[8]
tRP:[8]
tRAS:[18]
Command Per Clock: [2T]
 
** Advanced Memory Settings **
tRRD: [Manual] [7]
tRC: [Manual] [47]
tWR: [Manual] [12]
tWTR: [Manual] [19]
tFAW: [Manual] [36]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [101] 
 
**System Voltages**
CPU Core: [Manual] [1.331]
CPU FSB: [Manual] [1.3]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.6]
GTLVREF Lane 0: [Manual] [-50mv] 
GTLVREF Lane 1: [Manual] [-50mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv]
____________________________________________
4.225Ghz (CPU OC'd)(RAM OC'd)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1878]
Actual FSB (QDR), MHz:[1878]
x MEM (DDR),  MHz:[1878]
Actual MEM (DDR), MHz:[1878]
P1: [Enabled]
P2: [Enabled]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[8]
tRCD:[8]
tRP:[8]
tRAS:[23]
Command Per Clock: [2T]
 
** Advanced Memory Settings **
tRRD: [Manual] [8]
tRC: [Manual] [48]
tWR: [Manual] [12]
tWTR: [Manual] [20]
tFAW: [Manual] [37]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [104] 
 
**System Voltages**
CPU Core: [Manual] [1.39375]
CPU FSB: [Manual] [1.3]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.6]
GTLVREF Lane 0: [Manual] [-80mv] 
GTLVREF Lane 1: [Manual] [-100mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv]
____________________________________________
4.275GHz (CPU OC'd)(RAM OC'd)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1900]
Actual FSB (QDR), MHz:[1900]
x MEM (DDR),  MHz:[1900]
Actual MEM (DDR), MHz:[1900]
P1: [Enabled]
P2: [Enabled]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[8]
tRCD:[8]
tRP:[8]
tRAS:[24]
Command Per Clock: [2T]
 
** Advanced Memory Settings **
tRRD: [Manual] [8]
tRC: [Manual] [49]
tWR: [Manual] [12]
tWTR: [Manual] [20]
tFAW: [Manual] [37]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [105] 
 
**System Voltages**
CPU Core: [Manual] [1.39375]
CPU FSB: [Manual] [1.3]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.6]
GTLVREF Lane 0: [Manual] [-80mv] 
GTLVREF Lane 1: [Manual] [-100mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv] 
---------------------------------------------------------------------------  
 4.320GHz (CPU OC'd)(RAM OC'd)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1920]
Actual FSB (QDR), MHz:[1920]
x MEM (DDR),  MHz:[1920]
Actual MEM (DDR), MHz:[1920]
P1: [Enabled]
P2: [Enabled]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[8]
tRCD:[8]
tRP:[8]
tRAS:[24]
Command Per Clock: [2T]
 
** Advanced Memory Settings **
tRRD: [Manual] [8]
tRC: [Manual] [49]
tWR: [Manual] [12]
tWTR: [Manual] [20]
tFAW: [Manual] [38]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [106] 
 
**System Voltages**
CPU Core: [Manual] [1.4]
CPU FSB: [Manual] [1.35]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.6]
GTLVREF Lane 0: [Manual] [-80mv] 
GTLVREF Lane 1: [Manual] [-100mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv] 
 
_________________________________________________________ 
  
 4.356GHz (CPU OC'd)(RAM OC'd)
**FSB & Memorv Config**
FSB - Memory Clock Mode:[Linked]
FSB - Memory Ratio: [Synced]
FSB (QDR), MHz: [1936]
Actual FSB (QDR), MHz:[1936]
x MEM (DDR),  MHz:[1936]
Actual MEM (DDR), MHz:[1936]
P1: [Enabled]
P2: [Enabled]
 
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency):[8]
tRCD:[8]
tRP:[8]
tRAS:[24]
Command Per Clock: [2T]
 
** Advanced Memory Settings **
tRRD: [Manual] [8]
tRC: [Manual] [50]
tWR: [Manual] [12]
tWTR: [Manual] [20]
tFAW: [Manual] [38]
tREF: [Manual] [7.8uS]
tRFC: [Auto] [107] 
 
**System Voltages**
CPU Core: [Manual] [1.40625]
CPU FSB: [Manual] [1.35]
Memory: [Manual] [1.9]
nForce SPP:[Manual] [1.45]
nForce MCP:[Manual] [1.65]
GTLVREF Lane 0: [Manual] [-80mv] 
GTLVREF Lane 1: [Manual] [-100mv]
GTLVREF Lane 2: [Manual] [+00mv]
GTLVREF Lane 3: [Manual] [+00mv] 
 
____________________________________________________________________


 
I will be happy to answer any questions regarding these settings that you might have. As you can see, this RAM is very versitile when running 4GB's on a 790i board. Running 8GB's is a different story, as most of you already know. 1800MHz is "the sweet spot" on my board with the 8GB's and was extremely easy to do...just a few minor adjustments from the above 4GB settings was all it took. With 8GB's installed; I can only run them stable at 1333MHz, 1800MHz, 1828Mhz and 1900MHz.
 
Since the Patriot Viper "N" Series Modules (SLI Ready with the green heatspreaders) which were made specifically for the 790i boards are past EOL and extremely hard to find; if at all....these are a great alternative. They are basically the same modules with a different colored heatspreader and they do not have the EPP 2.0 (SLI Feature).    
 
post edited by JeffreyHam - 2011/06/11 21:06:07

 
PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
    
   = My Current Linked and Synced Settings

All detailed system components are listed on my Mods Rigs page. 
#1
List Solutions Only

52 Replies Related Threads
    [WildDog]
    Have you seen this dog?
    • Total Posts : 15292
    • Reward points : 0
    • Joined: 2008/02/25 11:00:00
    • Location: ║█║▌║█║▌│║▌█║
    • Status: offline
    • Ribbons : 34
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 15:23:48 (permalink) ☄ Helpful
    awesome thread :D
     
    when i had my nforce this thread could be so helpfull.
     
    glad someone takes his time to post these reference BIOS settings
     
     
     


    #2
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 15:34:39 (permalink)
    Thank you very much for your most kind remarks, WD. If you know anyone that this may help, please refer them here and I will be happy to assist them.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #3
    D.M.W.T
    FTW Member
    • Total Posts : 1730
    • Reward points : 0
    • Joined: 2007/11/24 18:04:33
    • Location: I am not sure
    • Status: offline
    • Ribbons : 4
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 15:47:05 (permalink) ☄ Helpful
    That took alot of time and effort, very nice of you to share this. Hopefully someone will take advantage of your hard work.
    #4
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 16:12:44 (permalink)
    D.M.W.T

    That took alot of time and effort, very nice of you to share this. Hopefully someone will take advantage of your hard work.


    Thank you, Sir!! I sure hope it helps someone out.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #5
    jerkinjohn
    iCX Member
    • Total Posts : 301
    • Reward points : 0
    • Joined: 2009/04/19 22:10:53
    • Location: Philly, Pa
    • Status: offline
    • Ribbons : 1
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 18:58:33 (permalink) ☄ Helpful
    Excellent work!!! Sure wish I had a 790i board right about now! Thanks for all your effort!

                                                               
    Haf 932 CM Tower/Intel I7 2700k/Noctua NH-D14/Evga Z68 FTW mobo/Evga SR2 Classified 1200W Psu/Evga GTX SC 670 4Gb X3 SLI/Corsair Vengeance LP Mem 16gb @ 1600/Corsair Force GT 240 gb SSD/Win10 64b pro/Planar 24"1920x1080/Acer 24"1920x1080 X2 using in surround/CM Storm Scout Mid Tower/AMD Ryzen7 5800X/CM cpu cooler/Gigabyte X470 Ultra Gaming mobo/Corsair TX750 psu/PowerColor Radeon RX5700XT gpu/Crucial Ballistix 16gb memory/Crucial 120gb SSD/Dell S2716DG
    #6
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 19:18:03 (permalink)
    Thank you very much, john...right now, I'm am wishing you had a 790i mobo too!! I would of better help to you, if you did.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #7
    mantic9
    New Member
    • Total Posts : 76
    • Reward points : 0
    • Joined: 2008/07/17 07:07:24
    • Status: offline
    • Ribbons : 1
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 20:08:37 (permalink) ☄ Helpful
    Thanks Jeffrey!
    This is awesome and should help a lot of people out... including me. One question... is this all with a 9x multiplier? With my Q9450 is this possible or should I just stick with the 8X?

    Thanks again for helping so many people!

    Coolermaster Cosmos 1000 case
    Antec True Power Quattro 850
    EVGA 790i motherboard
    Intel Q9450
    EVGA 460 GTX
    XFX 9800 GTX physx dedicated
    Patriot Viper 4gb Ram (2 x 2 gb)
    Seagate Barracuda 7200.11 750GB 32MB buffer
    Lite-on 4x blu-ray reader
    HP DVD writer
    Logitech G15 keyboard and G5 mouse
    Dell 2408 wfp monitor
     

    #8
    [WildDog]
    Have you seen this dog?
    • Total Posts : 15292
    • Reward points : 0
    • Joined: 2008/02/25 11:00:00
    • Location: ║█║▌║█║▌│║▌█║
    • Status: offline
    • Ribbons : 34
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 20:10:12 (permalink)
    i'm going back from my X58 board to an nforce 790 just to use this helpful thread :D

    #9
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 20:18:23 (permalink)
    mantic9

    Thanks Jeffrey!
    This is awesome and should help a lot of people out... including me. One question... is this all with a 9x multiplier? With my Q9450 is this possible or should I just stick with the 8X?

    Thanks again for helping so many people!


    Thank you very much, mantic. Yes, 9x multi and no, that is not possible for your CPU. You can go lower than your 8x but, not higher. This post is mostly centered around the RAM speeds and timings. You will have to play around with your CPU voltages.
     
    EDIT: I'm guessing that those changes I suggested to you on your thread made a good improvement and passed the tests?? 
    post edited by jeffreyham - 2010/09/29 20:28:52

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #10
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/09/29 20:19:34 (permalink)
    [WildDog]

    i'm going back from my X58 board to an nforce 790 just to use this helpful thread :D


    I want pix to prove that!!! WD

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #11
    mvelho
    New Member
    • Total Posts : 32
    • Reward points : 0
    • Joined: 2005/11/11 23:40:01
    • Status: offline
    • Ribbons : 0
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/10/08 16:31:23 (permalink) ☄ Helpful
    Jeff its Great you took the time to put this post together it is going to help me out when I get that ram you told me to get which should be by next week thanks again for the help with the stuff we have been talking about

    OS: Win 10 Professional 
    Case: Cooler Master 932 HAF
    Motherboard: Gigabyte Z370 AORUS Gaming 5
    CPU: Intel Core i5 6700k  
    Cooler:Artic  Liquid Freezer 240
    Video Card EVGA 1080 SC2 ICX 
    Ram: 16 Gigs GSKILL TridentZ RGB Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600

    SSD Drives
    1st Samsung 960 Pro 512gig
    2nd: OCZ Vertex 2 OCZ SSD2-2VTXE120G
    2nd HD: Seagate Momentus XT Solid State Hybrid
    Power Supple: EVGA  Super Nova G1 850W
    DVD Roms: Liteon SATA IHAS222 / Liteon SOHD   
    Mouse: Logitech G502
    Keyboard: Logitech G15
    Game Pad: Logitech G13

    #12
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/10/08 18:32:27 (permalink)
    mvelho

    Jeff its Great you took the time to put this post together it is going to help me out when I get that ram you told me to get which should be by next week thanks again for the help with the stuff we have been talking about


    Thank you very much for your kind comments here, Mark!! AAAAAAAAAAA AAAAAA AAAA AAAA Boo Boo!!!
     
    When your RAM comes in then, start a New Thread here in the nForce 7 Series MoBo Forum and we'll get your rig squared away. (Not that I wouldn't be willing to continue assisting you by PM...which I am happy to do)

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #13
    mvelho
    New Member
    • Total Posts : 32
    • Reward points : 0
    • Joined: 2005/11/11 23:40:01
    • Status: offline
    • Ribbons : 0
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/10/14 10:48:39 (permalink) ☄ Helpful
    Well everything is in and all I can say is wow wow it is like I have a new machine now  since you have helped me out with this Jefferyham the new ram helped out a lot and the o'c
    Thank You so Much

    OS: Win 10 Professional 
    Case: Cooler Master 932 HAF
    Motherboard: Gigabyte Z370 AORUS Gaming 5
    CPU: Intel Core i5 6700k  
    Cooler:Artic  Liquid Freezer 240
    Video Card EVGA 1080 SC2 ICX 
    Ram: 16 Gigs GSKILL TridentZ RGB Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600

    SSD Drives
    1st Samsung 960 Pro 512gig
    2nd: OCZ Vertex 2 OCZ SSD2-2VTXE120G
    2nd HD: Seagate Momentus XT Solid State Hybrid
    Power Supple: EVGA  Super Nova G1 850W
    DVD Roms: Liteon SATA IHAS222 / Liteon SOHD   
    Mouse: Logitech G502
    Keyboard: Logitech G15
    Game Pad: Logitech G13

    #14
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/10/19 22:31:16 (permalink)
    mvelho

    Well everything is in and all I can say is wow wow it is like I have a new machine now  since you have helped me out with this Jefferyham the new ram helped out a lot and the o'c
    Thank You so Much


    I'm very happy that you are happy...glad I could help you out, Brother.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #15
    vi0lation
    New Member
    • Total Posts : 24
    • Reward points : 0
    • Joined: 2010/10/20 10:05:21
    • Status: offline
    • Ribbons : 0
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/10/20 10:09:45 (permalink) ☄ Helpful
    This is awesome! it is EXACTLY what I've been scouring the net for, I have the same setup, right down to the patriot viper RAM :)
     
    My system is running stock right now, I will be trying push it to 4.05ghz setting this evening. My only questions is about the voltages, on Intel's CPU specification chart is says the max voltage for the Q9650 is 1.3625V, but in your 4.225ghz profile you have 1.393 listed. Is this a concern?
     
    Also, what revision of BIOS are you running this on? Thanks! I'll give you a heads up how it goes tonight :)
    #16
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/10/20 13:31:37 (permalink)
    Welcome to the Forum, vi0lation and thank you for your comment. 
     
    Yes, your are correct about the max, safe voltage according to Intel Spex. The MoBo suffers from what is known as VDroop. With VDroop...what is set in the BIOS is not what actually gets applied to the chip....it is a lower amount. Not all boards droop the same exact amount either...some more, some less. You need to use a monitoring program within Windows to see what the applied voltage is.
     
    For example, I'm currently running at the 4.113GHz 1828MHz settings with the Vcore set at 1.331v in the BIOS. CPU-z shows me that the actual applied voltage is 1.288v and under load, it drops down to 1.272v.
     
    I am on the latest BIOS for my board which is vP09. EVGA's 790i Ultra boards have a vP10 BIOS but, XFX has not put one out.
     
    I'll look forward to hearing your results. If you need assistance with your settings, please start a new thread in this Forum and list your detailed system spex and post a BIOS Template showing all of your current settings. Good Luck with your tuning.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #17
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/14 19:15:59 (permalink)
    Today: 11/14/2010...added new highest settings accomplishment to the list.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #18
    spacemanbiff
    Superclocked Member
    • Total Posts : 169
    • Reward points : 0
    • Joined: 2010/01/19 18:18:22
    • Status: offline
    • Ribbons : 0
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/15 00:05:59 (permalink) ☄ Helpful
    Hi, interesting thread ya have here. I saw your last post earlier, & it got me thinking, why not try for the lowest voltages @ 3GHz, since I have the same issue of getting anything stable between 3GHz & 3.6GHz?  I had 3.6 yesterday for awhile, but it was just running too darn hot, & something wasn't quite right. So this evening I played around awhile, & got 1.25V CPU, 1.275V CPU FSB, 1.65V RAM (mine's the newer Corsair XMS3), 1.32V SPP, & 1.5V MCP. I also started playing around with the Intel Burn Test, & found it more reliable than OCCT, which I still like, and used it to check each voltage setting, so it took awhile. BTW, I'm using a Q6600 on the EVGA 790i FTW Digital board, so it's a bit different from yours. These are mostly the lowest voltages available, other than vcore & RAM, lol, so it'll be hard to improve, voltage-wise. ;) I suspect that wrap-around heatsink deal is my problem, I think individual heatsinks on everything would work better, & I'm planning to experiment with that very soon. Anyways, thanks for the motivation & insight, I'm folding on it now, & still haven't hit 50C.  
    #19
    vavvav
    New Member
    • Total Posts : 24
    • Reward points : 0
    • Joined: 2009/12/30 18:46:35
    • Location: Seattle , Wa
    • Status: offline
    • Ribbons : 0
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/15 00:18:56 (permalink) ☄ Helpful
    sweet i just got this board!!! for sure gonna use this!!!
    perfect!!

    Evga z68
    Intel 1155 i7 2600k
    Corsair H80 Cooler
    2 150gig Wd Raptors raid 0
    1 Tb Wd Back Caviar hdrive & 1 640gig Wd Back Caviar hdrive
    8Gigs Corsair Vengence
    2 Nvidia 480 Gtx video Sli 
    Fatal1ty sound card
    Corsair ax1200 Psu
    Silverstone Ft02 Fortress case
    #20
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/15 20:52:42 (permalink)
    Thankx for your comments, guys. I wish you both luck with your settings tweaks. If you need any assistance, I will be happy to try and help you out.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #21
    HeThing
    CLASSIFIED ULTRA Member
    • Total Posts : 6897
    • Reward points : 0
    • Joined: 2010/05/11 07:45:49
    • Location: 6F4-72Y-6A8J <-- My Affiliate Code :D
    • Status: offline
    • Ribbons : 42
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/15 21:47:07 (permalink) ☄ Helpful
    +1 for great work..:D
     
    I used the same settings until I sold my 790i-setup.. My Q9650 was running at 4.275 Ghz.. 100% stable.. 

    #22
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/16 21:42:16 (permalink)
    Thank you for you kind remarks, hething.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #23
    BioHazardSperm
    EGC Admin
    • Total Posts : 9988
    • Reward points : 0
    • Joined: 2007/12/02 06:46:05
    • Location: Maine [EVGA Affiliate Code : 88LSZ0E7HK]
    • Status: offline
    • Ribbons : 26
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/17 03:55:14 (permalink)
    It would be interesting to also see the VDroop voltage on each .I know with my QX9770 each step up in OC'ing increased it's Droop significantly

    I am  >>NOT< <   a  EVGA Forums Moderator or a EVGA.com  Employee.
    I am only a  "Game Server Admin"
    My posts and are my own and not EVGA's.
     
    #24
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/17 04:01:26 (permalink)
    BioHazardSperm

    It would be interesting to also see the VDroop voltage on each .I know with my QX9770 each step up in OC'ing increased it's Droop significantly


    I could certainly add the VDrooped values next to the BIOS vcore settings. If I receive a few more requests for that info...I will.
     
    You can see the drooped value on the 4.320GHz setting in the CPU-z Validation link I provided on that one. Vcore at 1.4v set in the BIOS comes out at 1.352v drooped.
    post edited by jeffreyham - 2010/11/17 04:09:37

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #25
    BioHazardSperm
    EGC Admin
    • Total Posts : 9988
    • Reward points : 0
    • Joined: 2007/12/02 06:46:05
    • Location: Maine [EVGA Affiliate Code : 88LSZ0E7HK]
    • Status: offline
    • Ribbons : 26
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/17 04:29:53 (permalink)
    Wish the Qx was that good on droop .Mine is set at 1.4625 ,actual 1.39

    I am  >>NOT< <   a  EVGA Forums Moderator or a EVGA.com  Employee.
    I am only a  "Game Server Admin"
    My posts and are my own and not EVGA's.
     
    #26
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/17 21:03:37 (permalink)
    Yeah.....I'm so happy that I did not buy a QX chip.....I can't believe how volt-hungry they all seem to be.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #27
    brandon1978
    New Member
    • Total Posts : 6
    • Reward points : 0
    • Joined: 2010/09/29 22:02:04
    • Status: offline
    • Ribbons : 0
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/20 10:45:15 (permalink) ☄ Helpful
    Excellent write up and thank you.  I had to replace my 780i FTW with a 790i FTW since they didn't have the 780i FTW available.  I purchased the suggested memory from Fry's.  It costed a little more than NewEgg, but I didn't want to wait 2-3 days on delivery.  I was able to OC the processor to 3.6Ghz with no problems.  Thanks again and +1.
    #28
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/11/20 20:56:30 (permalink)
    brandon1978

    Excellent write up and thank you.  I had to replace my 780i FTW with a 790i FTW since they didn't have the 780i FTW available.  I purchased the suggested memory from Fry's.  It costed a little more than NewEgg, but I didn't want to wait 2-3 days on delivery.  I was able to OC the processor to 3.6Ghz with no problems.  Thanks again and +1.


    You are very welcome and I thank you for your kind remarks, brandon. If you need any assistance in attempting a higher OC, please feel free to ask and I will do my best to help you.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #29
    JeffreyHam
    R.I.P. Friend
    • Total Posts : 7737
    • Reward points : 0
    • Joined: 2006/08/08 10:31:07
    • Location: Missouri Ozarks, U.S.A.
    • Status: offline
    • Ribbons : 126
    Re:790i Ultra Stable OC's - If Anyone Is Interested... 2010/12/05 09:31:14 (permalink)
    Today: 12/5/2010...added new highest settings accomplishment to the list.

     
    PLEASE REMEMBER TO UPLOAD A COPY OF YOUR INVOICE 
        
       = My Current Linked and Synced Settings

    All detailed system components are listed on my Mods Rigs page. 
    #30
    Page: 12 > Showing page 1 of 2
    Jump to:
  • Back to Mobile