nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Here is a build log of my EVGA X58 759 A1 with 3 EVGA 480 HC This project started out with the Corsair Obsidian 800d Case but after seeing the spec's on the Video cards, I made a custom order for a Mountian Mods Extended Ascension CYO Case in Transparent Candy Apple Red Powder Coat. Case comes flat boxed this it going together. This is the 3 Black 360 Ice SR-1 going on the front panel This is the first of 2 Black Ice 480 SR-1 going in the top panel side view of case with Board and the 360's and 480's installed View with 2 of the 3 Swiftech Uber 655 installed with Koolance TNK-240-V2 Reservoir View of the 3 EVGA 480 HC with EVGA 240 as Physx side view after running tubing Other side view where pumps 2 and 3 are mounted.
post edited by sickfreak - 2010/05/24 02:40:38
|
Re:Building of Big Red
2010/05/23 19:07:18
(permalink)
Nice pictures. Question where is everyone getting these ultimate water cooling cases?
|
sims36
FTW Member
- Total Posts : 1108
- Reward points : 0
- Joined: 2009/01/18 01:14:56
- Location: @ my keyboard overclocking!
- Status: offline
- Ribbons : 1
Re:Building of Big Red
2010/05/23 19:40:17
(permalink)
hey is that a koolance water cooled psu??
NEW MADNESS IN THE WORKS......STAY TUNED!! HEATWARE: sims36
|
Re:Building of Big Red
2010/05/23 19:42:41
(permalink)
wkoalmc2011 Nice pictures. Question where is everyone getting these ultimate water cooling cases? mountain mods
|
Hugh Jass
FTW Member
- Total Posts : 1472
- Reward points : 0
- Joined: 2008/10/29 13:03:56
- Location: Los Angeles, CA
- Status: offline
- Ribbons : 3

Re:Building of Big Red
2010/05/23 19:55:29
(permalink)
cj3waker wkoalmc2011 Nice pictures. Question where is everyone getting these ultimate water cooling cases? mountain mods Expect to pay over $300 for them hahaha
EVGA X58 E758 i7 930 4.2GHz EVGA GTX 660 heatWare
|
Re:Building of Big Red
2010/05/23 20:04:30
(permalink)
Hmm i wonder if they could help me make my air cooling beast that I am dreaming up.
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/23 20:11:56
(permalink)
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/23 20:20:54
(permalink)
Hugh Jass Expect to pay over $300 for them hahaha Little more then $300 with $48 Shipping was 946.00 Products 1 x Extended Ascension CYO - Motherboard Tray: HPTX (EVGA SR-2) - Back Panel Type: 10 PCI - Window Etching: 1 Windows (Send Image File to su - Finish: Custom Powder Coat - Acrylic Color: UV Blue - Side 3: Triple Quad - Side 1: Big Window Panel - Side 2: Solid ALU Panel - Back Panel Fan Spacing: 15mm - Front Panel Fan Spacing: 15mm - Front Panel Type: Trinity $666.98 9 x Mountain Mods 120MM Axe-2-Grind Acrylic Fan Grill - Color: UV Blue $40.41 16 x 120MM Silver Aluminum Fan Filter $63.84 21 x YATE LOON 120mm Case Fan - D12SL-12 $104.79 2 x Mountain Mods ALU (Brushed) 5-1/4 bay cover $21.98
|
flamingaxe791
CLASSIFIED Member
- Total Posts : 2596
- Reward points : 0
- Joined: 2007/08/21 21:50:11
- Location: San Antonio, TX
- Status: offline
- Ribbons : 2
Re:Building of Big Red
2010/05/23 20:51:00
(permalink)
ATI RIG HIS 5970 (950/1250) EVGA X58 E758 I7 920 4.0Ghz (stock voltage) 6Gigs of Mushkin blackline tripple channel Sound Blaster X-Fi titanium fatality series Two 300Gig Western Digital VelociRaptors Ocz Vertex Turbo (Boot Drive) Corsair H50
|
ug0tserved
SSC Member
- Total Posts : 842
- Reward points : 0
- Joined: 2010/01/24 18:46:36
- Location: Texas Fort Worth
- Status: offline
- Ribbons : 3
Re:Building of Big Red
2010/05/23 21:40:58
(permalink)
Are those top fans sucking air in or blowing air out? and you might want to put some filters on the front fans! if you dont, youll biuld up dust preety fast!
post edited by ug0tserved - 2010/05/23 22:12:47
i7 960 Overclocked to 4.2Ghz EVGA 3 way SLI Classified Hyper X Kingston 6GB 2000 GTX 295 Dual PCB FTW with Backplate GTX 275 with Backplate for PhysX Killer 2100 Gaming Network Card 120GB OCZ Solid State Disk Colossus Series 2TB Samsung Spinpoint F1 in RAID 0 Corsair HX1000 PSU Mountain Mods Extended Ascension Case Alienware M17x-R1 Nebula Red Intel Core 2 Duo T9600 @ 2.8ghz 6GB DDR3 1333 2x Intel X25-V SSD 40GB in RAID0 Dual Nvidia GTX 280M's in SLI
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/24 01:01:36
(permalink)
|
ug0tserved
SSC Member
- Total Posts : 842
- Reward points : 0
- Joined: 2010/01/24 18:46:36
- Location: Texas Fort Worth
- Status: offline
- Ribbons : 3
Re:Building of Big Red
2010/05/24 01:10:52
(permalink)
Cool.... thats good to hear! and good luck.. its looking nice!
i7 960 Overclocked to 4.2Ghz EVGA 3 way SLI Classified Hyper X Kingston 6GB 2000 GTX 295 Dual PCB FTW with Backplate GTX 275 with Backplate for PhysX Killer 2100 Gaming Network Card 120GB OCZ Solid State Disk Colossus Series 2TB Samsung Spinpoint F1 in RAID 0 Corsair HX1000 PSU Mountain Mods Extended Ascension Case Alienware M17x-R1 Nebula Red Intel Core 2 Duo T9600 @ 2.8ghz 6GB DDR3 1333 2x Intel X25-V SSD 40GB in RAID0 Dual Nvidia GTX 280M's in SLI
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/24 02:03:29
(permalink)
Cheers got tracking info on my ELECTRIC MOTORIZED 84" 16:9 PROJECTOR SCREEN. Can't wait to play some of my games on my Panasonic PT-AE2000. I was gonna sell it after I upgraded my theater room to the new PT-AE4000. But figured it was worth more to me then I would have been able to sell it for. As cool as the 3 lcd monitor setup looks I think 84" will look better.
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/24 02:19:38
(permalink)
When I posted my fist build log using the Corsair Obsidian 800D case everyone told me I would need 2 PSU's to power the PC , 3 480 HC , HDD's , and all the Pumps. What happened when I used 2 PSU was soon as I would run Windows Experiance index the system would reboot and if I ran 3d Mark vantage there would be clipping and system would reboot on 2nd graphic test. After trying many things to fix this the only thing that worked was dropping back to one PSU. Seems there was not enough cross loading on the 5v rail on the 2nd psu Iwas using it to run the 480's and some ccfl lights. Even after putting all the HDD's on the 2nd PSU still same issue. Once I put entire system on the 1250w all my reboots went away. So now I guess I will order another BI SR-1 480 for the top panel of my case and add it to the GPU loop.
|
Re:Building of Big Red
2010/05/24 08:24:59
(permalink)
Just curious, but why do you have your EK CPU block mounted sideways?
Main Rig: Intel i7 920 [C0] @ 3.82Ghz | EVGA X58 [759] Classified (64) | MM Extended Ascension w/ Pedestal | Corsair HX1050 24GB Patriot Viper II ‘Sector 7’ 2000mhz (9-11-9-27) @ 1.65v | 2x EVGA GTX480 (875/2000 @1.1v) | CPU, GPUs and Mobo on H2O Dedicated Folding Rig: ~In Progress~ Intel i7 3770K | EVGA Panther Point Mobo | Corsair AX650 | 8GB Corsair Vengeance 2000mhz (10-10-10-27) @ 1.5v
|
Re:Building of Big Red
2010/05/24 19:35:25
(permalink)
Sickfreak... Is your 3 way SLI working properly now? also make sure to try the new beta drivers. Overall I hope all is working out.
|
BDW_88
ACX Member
- Total Posts : 277
- Reward points : 0
- Joined: 2006/05/07 20:50:18
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/25 00:26:36
(permalink)
Interesting fan grills Overall pretty nice build I like the candy powdercoat especially
Mountain Mods ex. Ascension + pedestal - EVGA X58 Classified (E759) - i7 980X @4.5 - 6990+6970 tri-fire
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/25 12:55:22
(permalink)
sledgehammer70 Sickfreak... Is your 3 way SLI working properly now? also make sure to try the new beta drivers. Overall I hope all is working out. Sickfreak... Is your 3 way SLI working properly now? also make sure to try the new beta drivers. Overall I hope all is working out. Yeah Sledgehammer it was crossloading on the 2nd psu but no matter how many drives and other stuff I added to the GPU PSU it would still reboot. Once I took out the other PSU and ran with just one I was fine.
|
ug0tserved
SSC Member
- Total Posts : 842
- Reward points : 0
- Joined: 2010/01/24 18:46:36
- Location: Texas Fort Worth
- Status: offline
- Ribbons : 3
Re:Building of Big Red
2010/05/25 13:52:09
(permalink)
i have a question? since your using a colored tubing, why used a colored liquid aswell? dont you think Distiled Water and PT nuke or Feser based is better?
i7 960 Overclocked to 4.2Ghz EVGA 3 way SLI Classified Hyper X Kingston 6GB 2000 GTX 295 Dual PCB FTW with Backplate GTX 275 with Backplate for PhysX Killer 2100 Gaming Network Card 120GB OCZ Solid State Disk Colossus Series 2TB Samsung Spinpoint F1 in RAID 0 Corsair HX1000 PSU Mountain Mods Extended Ascension Case Alienware M17x-R1 Nebula Red Intel Core 2 Duo T9600 @ 2.8ghz 6GB DDR3 1333 2x Intel X25-V SSD 40GB in RAID0 Dual Nvidia GTX 280M's in SLI
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/26 00:34:58
(permalink)
ug0tserved i have a question? since your using a colored tubing, why used a colored liquid aswell? dont you think Distiled Water and PT nuke or Feser based is better? I was playing around with different dye bombs to see if could get a freaky color going. It is Distiled Water and PT nuke. On another note I think I have a real illness (retail therapy) after seeing the temps on Sledgehammers I980 CPU and the fact that I am runing with 1 PSU I pulled the trigger on a EVGA 762 MB and the 980 CPU. I decided I got 4 of these 480 HC why run a 2nd system with just one. So by Friday I will be 4way SLI.. This is the first time I have upgrade a PC twice before it was even finished being built. Wonder if there is a twelve step program for PC Users.. (Hi my name is Sickfreak, I can't stop upgrading!)
post edited by sickfreak - 2010/05/26 00:41:58
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/26 00:43:49
(permalink)
sinsear Just curious, but why do you have your EK CPU block mounted sideways? When it is mounted the other way my temps are 20 deg higher just at idle. I retested it several times.
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/26 17:50:53
(permalink)
|
Re:Building of Big Red
2010/05/26 19:25:58
(permalink)
As much as I would like to go 4 way SLI i think 3 way is my max for now. but glad to see You will be in some therapy classes with me :). Its a hobby if nothing more. I love it and can't stop!
|
Re:Building of Big Red
2010/05/27 01:25:36
(permalink)
Love that case color!
post edited by nendain - 2010/05/27 01:35:44
|
Re:Building of Big Red
2010/05/27 01:36:55
(permalink)
opps sleepy and hit post by mistake
post edited by nendain - 2010/05/27 01:40:05
|
nendain
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2010/03/26 21:23:42
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/27 01:41:29
(permalink)
I started to clean up my office space since my Electric Projector Screen will be here tomorrow. Then I dragged the projector in here and set it on the 800D case just to get a look see what it will look like when I get the desk in here and mount the projector. Wow I am gonna be so happy. Here is a snapshot of what it will be like. Course this is on the wall and much smaller then it will be by this weekend.
post edited by sickfreak - 2010/05/27 01:53:02
Attached Image(s)
|
rambler358
CLASSIFIED Member
- Total Posts : 2633
- Reward points : 0
- Joined: 2008/05/01 21:41:19
- Location: Torrance, CA
- Status: offline
- Ribbons : 5
Re:Building of Big Red
2010/05/27 16:45:14
(permalink)
|
stevemr2t
Superclocked Member
- Total Posts : 207
- Reward points : 0
- Joined: 2010/02/25 19:00:19
- Status: offline
- Ribbons : 0
Re:Building of Big Red
2010/05/27 19:00:43
(permalink)
The card one to two water looking line looks odd, seems like it's pulling the card on an angle....
I7-980x Extreme @ 4.1Ghz Corsair Dominator GT 16000 - 6GB @ 2000Mhz 2 Way SLI (GTX480) X58 Classified 4-Way SLI Silverstone 1500w Windows 7 64Bit Mushkin IO 128GB SSD Intel X25 80GB SSD Thermaltake ArmorPlus Case Alienware OptX AW2310 120 Hz LCD display Vantage Score (3 Way SLI GTX480) - 47345 http://service.futuremark.com/compare?3dmv=2129863
|
Re:Building of Big Red
2010/06/04 23:55:48
(permalink)
rambler358 You've only got 1 PSU? Only one is correct. I have replaced the Enermax 1250 with a silverstone 1500 since I ordered the 4way sli 762 board. This is a beast of a PSU Board is here just waitting on the EK FB Water Block V2
|
danger30q
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2008/04/19 11:28:14
- Location: Madison, WI
- Status: offline
- Ribbons : 2

Re:Building of Big Red
2010/06/05 21:23:03
(permalink)
I'm trying to figure out if I should go with an MM Ascension or Extended UFO. With the price of the Feser 480 at Frozencpu down to $80, I'm trying to figure out where to put 3 of these Feser 480 radiators. This build of yours gives me some serious thoughts as to what I can do with an MM Extended Ascension. Absolutely insane build and I do love the candy red powdercoat.
2600K @ 4.5ghz 1.35V, Asus P67 Pro, 4gb G.Skill RipJawsX 2133mhz 9-10-9-28, EVGA 580 GTX SC @ 850mhz on air, Corsair AX850, Lian-Li A10 custom anodized all black
|