I'm posting my 3.7Ghz OC template in the hopes it will help some other noobies like myself. It's nothing special. Maybe it will help someone as a starting point for their system. The only voltage I set was my DIMM voltage, every other voltage I left at Auto. My original memory timings were 8-8-8-24. This template passed 50 runs of Linx / All memory and 13 hrs of P95 / Blend. I am getting core temps between 75-80 and Vreg temps of 75, but I think it's due more to poor case cooling than high voltages. I'm happy with what I have, and, at the moment at least, not ready to push further. I tried 180 CPU Host Freq, but got a BSOD. I didn't pursue it to find the cause.

Hope this helps someone in some way.

Mother Board ( EVGA X58 E758 )
Drivers ( 1020 )
Bios ( IX58SZ2W )
CPU ( 920 D0)
CPU Cooler ( ARCTIC FREEZER 7 PRO REV.2 )
Memory ( CORSAIR XMS3 6GB DDR3 1600 (3 X 2G) 8,8,8,24 1.65V specs )
PSU ( CORSAIR CMPSU-750HX )
GPU ( EVGA GTX275 FTW, EVGA GTS 250 (PhysX only) )
Drivers ( 196.21 )
Operating System ( Windows 7 64 HOME PREMIUM )


Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 177 )
Target CPU Freq ( 3724 / 177 x 21 )
Target Memory Freq ( 1418 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 2837 / 16X )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )

Memory Feature
Memory Speed ( STD )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( Auto / 74 )
Command Rate ( 1T )


Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( AUTO / 1.28125 )
CPU VTT Voltage ( AUTO / +200mV )
CPU PLL VCore ( AUTO/1.8V )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( AUTO/+0mV )
QPI PLL VCore ( AUTO/1.1V )
IOH VCore ( Auto/1.1V )
IOH/ICH I/O Voltage ( Auto/1.5V )
ICH VCore ( Auto/1.05V )
*PWM Frequency ( 800Khz )


CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection (4.8 GT/s )
OC Recovery ( Disabled )
Turbo Performance (  )

PnP/PCI     PCI Express
Maximum Payload Size ( 256 )
 
Power Management Setup
ACPI Suspend Type ( S1 ) 
HPET Support (  )   
HPET Mode (  )

Thanks Inozim
That's one reason why I'll stay here for awhile. I've posted about my temp problems in other threads, and I know I need to do something. I have a couple of higher CFM fans, just haven't installed them yet. And my current case won't allow me to go with a bigger cpu cooler. I'm just not ready to give up on this case yet.

I've been buzzed by the OC BUG, but it hasn't bitten me hard yet. Maybe soon though.