At least as far under as I care to go. This took me 11 freaking hours!!! Those two small pieces coming from the CPU? 6 hours!!!! I could not for the life of me figure out what to do. Things were so close together! But, MOBO is under water and CPU and GPU's. Cooled by a 240 rad and a 360. The 240 is a swiftek I've had since I bought the kit, it's in push pull, the 360 is the new pretty blue rad I got a week ago. It's thin enough to be top mounted in this case, but not thin enough for push pull. That is my only complaint about the case is that tiny amount of room up there. Also oddly enough the Radiators holes did not line up for that last fan that's on the bottom/inside. Was not going to "Fix it" as it's fine how it is...for now...I've been folding for a while now and temps are as follows.... ALSO a sidenote here. Thanks Zophar for the caps! They work perfectly, of course and I've seen no leaks :P Also thank you Muskie for the help with fittings. Ended up not needing one of the 45's so If I find no further use for it I'll give it back to you or someone else on here! Now I have a radiator to send to Escobar :P Ambient = almost 80f....it's toasty in here.... CPU MAX: Core 0 54c Core 1 52c Core 2 55c Core 3 49c Those are total maxed temps CPU Idle: Core 0 24c Core 1 24c Core 2 33c Core 3 27c GPU Max: GPU 0 42c GPU 0 41c GPU IDLE: GPU 0 33c GPU 1 30c And since it's cooling off in here they are dropping. I know they could probably be better, but they could be worse, so I'm happy.      
post edited by Chrome-M-Dragon - 2012/05/21 21:54:40
Man is capable of as much atrocities as he has imagination. People are, well, only human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in America.
|
Re:So i'm finally all under water....
2012/05/21 21:39:49
(permalink)
That looks so sweet! Great job mate! 
Ship EVGA Products Locally in Australia! EVGA X79 FTW - i7 3930K @ 4.0GHz - 4x4GB Corsair Dominator GT 2133MHz C9 - EVGA GTX 1080 FTW - Corsair AX850 PSU - Corsair Performance Pro 128GB SSD - 2x 2TB Samsung Barracuda 7200rpm - Noctua DH-14 SE2011 - CoolerMaster HAF 932 Advanced
|
Re:So i'm finally all under water....
2012/05/21 21:44:59
(permalink)
Looks awesome Dragon! Good job. 
|
SEBAR
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2011/06/19 22:31:11
- Location: San Diego
- Status: offline
- Ribbons : 2
Re:So i'm finally all under water....
2012/05/21 21:48:58
(permalink)
WOW. 
|
Re:So i'm finally all under water....
2012/05/21 21:50:43
(permalink)
I need to get rig of those SATA cables and i'll be golden, will be pretty much perfectly clean
Man is capable of as much atrocities as he has imagination. People are, well, only human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in America.
|
Re:So i'm finally all under water....
2012/05/21 21:55:24
(permalink)
GET OUTTA THE WATER!!! I REPEAT: GET OUTTA THE WATER!!! 
|
ManBearPig
CLASSIFIED ULTRA Member
- Total Posts : 5970
- Reward points : 0
- Joined: 2007/10/31 12:02:13
- Location: Imaginationland
- Status: online
- Ribbons : 16
Re:So i'm finally all under water....
2012/05/21 22:05:11
(permalink)
Me likey
|
Bkatt
Omnipotent Enthusiast
- Total Posts : 13890
- Reward points : 0
- Joined: 2009/02/22 08:42:52
- Location: The Deserts of Arizona, US
- Status: offline
- Ribbons : 38
Re:So i'm finally all under water....
2012/05/21 22:19:33
(permalink)
EVGA X58 (758)RV-1|1000W PSU|920 C0 @ 3.724 (19x196) 1.32V 200+VTT (HT on)|4GB EVGA 950 |5 250GB (raid 5)|windows 7 pro) & 1 1.5 TB|3 24" 1920x1200 Code :X7G0Z0AY5U CompTIA A+, Security +
|
voodoo do-er 
CLASSIFIED Member
- Total Posts : 4752
- Reward points : 0
- Joined: 2011/09/02 10:20:58
- Location: 1934~2012 Eduard Khil
- Status: offline
- Ribbons : 9
Re:So i'm finally all under water....
2012/05/21 22:27:25
(permalink)
nice looking good
post edited by voodoo do-er - 2012/05/21 22:29:28
|
Re:So i'm finally all under water....
2012/05/21 22:28:25
(permalink)
I'm guessing distilled, since it's clear in the CPU block.
|
voodoo do-er
CLASSIFIED Member
- Total Posts : 4752
- Reward points : 0
- Joined: 2011/09/02 10:20:58
- Location: 1934~2012 Eduard Khil
- Status: offline
- Ribbons : 9
Re:So i'm finally all under water....
2012/05/21 22:30:52
(permalink)
just looked at the rez
yup its distilled,the tubing made it look like it was not
|
Re:So i'm finally all under water....
2012/05/21 22:31:34
(permalink)
True. Agreed. The tubing looks brighter than most colored tubing. I like it!
|
Re:So i'm finally all under water....
2012/05/21 23:00:28
(permalink)
Yeah it's distilled, nothing more, silver kill coil in there somewhere. Tubing is Primochill Primoflex pro LRT tubing 7/16ID - 5/8OD. Should dI add anything? I hear ppl put liquid soap in and whatnot?
Man is capable of as much atrocities as he has imagination. People are, well, only human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in America.
|
Re:So i'm finally all under water....
2012/05/21 23:17:19
(permalink)
Sounds good! And does the pump make splashing noise, etc?
I was the one who came up with the soap idea. My pump always made a splash sound, even without bubbles.
Well I added two drops of dish soap into it, and it suddenly got dead quiet. All the foam broke down in about 8 hours, then it was set.
|
Re:So i'm finally all under water....
2012/05/21 23:49:41
(permalink)
No, no noise from the pump. How did you get the idea to use dish soap?
Man is capable of as much atrocities as he has imagination. People are, well, only human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in America.
|
Re:So i'm finally all under water....
2012/05/22 01:25:41
(permalink)
|
Re:So i'm finally all under water....
2012/05/22 02:33:37
(permalink)
|
Re:So i'm finally all under water....
2012/05/22 08:59:47
(permalink)
Chrome-M-Dragon
No, no noise from the pump. How did you get the idea to use dish soap?
Idk... Haha. Well I was washing my hands, and thought "Hey, soap makes things slick, and soft.", so I figured it would maybe "lube" the pump and blocks, so the water wouldn't sound so rough, and well it worked perfect. I've been doing that now for 5 months with no issues.
|
Re:So i'm finally all under water....
2012/05/22 10:24:09
(permalink)
Very Nice!!!
|
|
|
Re:So i'm finally all under water....
2012/05/22 13:24:25
(permalink)
EliteGeek91
Chrome-M-Dragon
No, no noise from the pump. How did you get the idea to use dish soap?
Idk... Haha. Well I was washing my hands, and thought "Hey, soap makes things slick, and soft.", so I figured it would maybe "lube" the pump and blocks, so the water wouldn't sound so rough, and well it worked perfect. I've been doing that now for 5 months with no issues.
Huh....lol :P At least it worked I guess :P
Man is capable of as much atrocities as he has imagination. People are, well, only human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in America.
|
Re:So i'm finally all under water....
2012/05/22 15:09:42
(permalink)
My Affiliate Code: GL1IAAFWJF
|
uncle poop
SSC Member
- Total Posts : 592
- Reward points : 0
- Joined: 2012/01/11 09:56:18
- Location: dirty jerzey
- Status: offline
- Ribbons : 0
Re:So i'm finally all under water....
2012/05/22 16:17:15
(permalink)
nice build... looks awesome...
|
Re:So i'm finally all under water....
2012/05/22 18:08:27
(permalink)
Thanks slein and UPoop :P heh...upoop.....lol
Man is capable of as much atrocities as he has imagination. People are, well, only human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in America.
|
Gone Cruising
FTW Member
- Total Posts : 1600
- Reward points : 0
- Joined: 2008/02/17 23:10:31
- Location: North Sound
- Status: offline
- Ribbons : 36
Re:So i'm finally all under water....
2012/05/22 23:55:21
(permalink)
Very nice!!! I miss the blue in builds and it's great to see yours...nice job!!!
|
Re:So i'm finally all under water....
2012/05/23 06:31:06
(permalink)
Love it! And I hear you on things being too close together! I just finished putting my CPU under water the other day. The outlet on my rad is just about 3 inches from the res. Trying to get in there to make the fittings - well, fit - was physically and mentally painful! Great job though. I'm seeing similar temps on my rig - anywhere from 10 - 12 degrees cooler than when I was on an H70.
|
