Please try these settings and if it boots...go straight back into the BIOS and provide the values showing next to the Auto settings by replacing the ?'s.
BIOS Version: P10
**System **
CPU Freq, MHz: (3600)
FSB Reference Clock, MHz: (400)
CPU Multiplier: [9x]
PCle x16-1 & 16-2, MHz: [AUTO] (100)
PCle x16-3, MHz: [AUTO] (100)
SPPc->MCP Ref Clock, MHz: [AUTO] (200)
nForce SPP --> nForce MCP: [5X]
nForce SPP c-- nForce MCP: [5X]
**Spread Spectrum**
CPU Spread Spectrum: [Disabled]
HT Spread Spectrum: [Disabled]
PCle Spread Spectrurn(SPP): [Disabled]
PCle Spread Spectrurn(MCP): [Disabled]
SATA Spread Spectrum: [Disabled]
**FSB & Memorv Config**
FSB - Memory Clock Mode: [Linked]
FSB - Memory Ratio: FSB (QDR), MHz: [Synced]
Actual FSB (QDR), MHz: (1600)
x MEM (DDR), MHz: Linked (1600)
Actual MEM (DDR), MHz: (1600)
P1: [AUTO]
P2: [AUTO]
**Memory Timing Setting**
Memory Timing Setting: [Expert]
tCL (CAS Latency): (9)
tRCD: (9)
tRP: (9)
tRAS: (24)
Command Per Clock: [2T]
** Advanced Memory Settings **
tRRD: [Auto] (6)
tRC: [Auto] (41)
tWR: [Auto] (12)
tWTR: [Auto] (17)
tFAW: [Auto] (25)
tREF: [Manually set] (7.8uS)
tRFC: [Auto] (?)
**System Voltages**
CPU Core: [Manually set] (1.4v)
CPU FSB: [Manually set] (1.3v)
Memory: [Manually set] (1.8v)
nForce SPP: [Manually set] (1.45v)
nForce MCP: [Manually set] (1.55v)
GTLVREF Lane 0: [AUTO] (+00mv)
GTLVREF Lane 1: [AUTO] (+00mv)
GTLVREF Lane 2: [AUTO] (+00mv)
GTLVREF Lane 3: [AUTO] (+00mv)
**CPU Configuration** Immediately set to these listed settings
Limit CPUlD Maxval: [Disabled]
Intel Speedstep: [Disabled]
xPPM Mode: [Native MODE]
CPU Thermal Control: [Disabled]
C1E Enhanced Halt State: [Disabled]
Execute Disable Bit - [Disabled]
Virtualization Technology: [Disabled if not using VT]
CPU Core 0: [Enabled]
CPU Core 1: [Enabled]
CPU Core 2: [Enabled]
CPU Core 3: [Enabled]
post edited by JeffreyHam - 2011/07/14 21:33:59
