Quynhvy18
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2011/06/06 21:28:30
- Status: offline
- Ribbons : 0
Please help me how to fix this problem, thank you ! 
post edited by Quynhvy18 - 2011/06/16 23:42:12
|
_Nite_
Insert Custom Title Here
- Total Posts : 19175
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 00:28:53
(permalink)
can't read the picture
imageshack resized it too small
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
Quynhvy18
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2011/06/06 21:28:30
- Status: offline
- Ribbons : 0
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 09:19:31
(permalink)
|
KenMcC
CLASSIFIED Member
- Total Posts : 3329
- Reward points : 0
- Joined: 2010/07/02 07:02:23
- Location: Garland, TX
- Status: offline
- Ribbons : 21
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 10:18:43
(permalink)
The problem from what I can see in his/her description: Under "Device Manger" "Universal Serial Bus controllers" there is a VIA device that has the Message posted as the Issue i.e.:
" VIA USB 3.0 Root Hub : Code 10 "
I don't know how to solve the problem, but I hope I have defined it correctly.
KenMcC Z170 Classy K; i7-6700 CPU, Corsair CMK16GX4M2A2400C14 Seasonic SSR-360GP 360W; Samsung 950 Pro M.2 256 GB Samsung 850 Evo 500 GB SATA Samsung 850 Evo 256 GB SATA Samsung SSD 840 Series 250 GB SATA Samsung 860 EVO 1 TB SATA Windows 10 x64 Prof.
|
wrinvert
R.I.P Friend
- Total Posts : 3751
- Reward points : 0
- Joined: 2007/05/01 19:32:12
- Location: lost forever
- Status: offline
- Ribbons : 17
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 10:24:49
(permalink)
|
KenMcC
CLASSIFIED Member
- Total Posts : 3329
- Reward points : 0
- Joined: 2010/07/02 07:02:23
- Location: Garland, TX
- Status: offline
- Ribbons : 21
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 10:54:07
(permalink)
After you install correct driver IMO you should check to see if the old drivers were removed or just Hidden! See below and Read NOTEs at the bottom before you start. To check and see if you have wrong drivers (FTW/SLI) from previous installs present on your hardware; you must set a flag for device manager from the cmd box. In the Start Menu, click on All Programs and then Accessories. Now right click on the Command Prompt and click on Run as administrator. Now type in this FLAG/CMD: “set devmgr_show_nonpresent_devices=1” (no quotes) Next type ”devmgmt.msc “ (as administrator) Once you are in Device Manager, go to the "View" menu, select “Show Hidden Devices”. This will show all the device drivers including things that aren’t currently installed in your computer. You can right-click on the driver and then choose Uninstall from the menu to remove the drivers for that old hardware. This procedure can resolve a lot of weird issues, and even increase performance on some machines where you’ve upgraded drivers a ton of times. NOTE: the grayed out drivers may OR may Not still be needed. Before deleteing make sure they are not for some devices (like USBs or some parts of media player). 
KenMcC Z170 Classy K; i7-6700 CPU, Corsair CMK16GX4M2A2400C14 Seasonic SSR-360GP 360W; Samsung 950 Pro M.2 256 GB Samsung 850 Evo 500 GB SATA Samsung 850 Evo 256 GB SATA Samsung SSD 840 Series 250 GB SATA Samsung 860 EVO 1 TB SATA Windows 10 x64 Prof.
|
_MatthewH
CLASSIFIED Member
- Total Posts : 4236
- Reward points : 0
- Joined: 2010/03/16 15:48:27
- Status: offline
- Ribbons : 3
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 12:40:57
(permalink)
|
cateno
SSC Member
- Total Posts : 979
- Reward points : 0
- Joined: 2009/10/18 01:32:46
- Location: Belgium
- Status: offline
- Ribbons : 3
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 12:50:04
(permalink)
Z690 classified start build X299 DARK 7900X 7740x soon 7980X X299 APEX X299 rampage Extreme E762 W3520@4.2 E679 2600k E760 X980 E761 I920 E770 I950 and SR2's and SRX's Z87 classified , MVIE built with 4770K Z97 classified , ftw Z97 , MFVII only wait for gigabyte LN2 X99 series.... classified , FTW , RE5 , oc formula, profesional , X11 , soc force , msi gaming9ack X79 classified, dark and RIVE, RIVBE,, xtreme11 and many classified a panel from EVGA no just one sample and other DFI giga etc 
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3040
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 13:18:17
(permalink)
KenMcC
After you install correct driver IMO you should check to see if the old drivers were removed or just Hidden! See below and Read NOTEs at the bottom before you start.
To check and see if you have wrong drivers (FTW/SLI) from previous installs present on your hardware; you must set a flag for device manager from the cmd box. In the Start Menu, click on All Programs and then Accessories. Now right click on the Command Prompt and click on Run as administrator. Now type in this FLAG/CMD: “set devmgr_show_nonpresent_devices=1” (no quotes)
Next type ”devmgmt.msc “ (as administrator)
Once you are in Device Manager, go to the "View" menu, select “Show Hidden Devices”. This will show all the device drivers including things that aren’t currently installed in your computer.
You can right-click on the driver and then choose Uninstall from the menu to remove the drivers for that old hardware.
This procedure can resolve a lot of weird issues, and even increase performance on some machines where you’ve upgraded drivers a ton of times.
NOTE: the grayed out drivers may OR may Not still be needed. Before deleteing make sure they are not for some devices (like USBs or some parts of media player).
Returns the following error: 'FLAG' is not recognized as an internal or external command, operable program or batch file.
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
_MatthewH
CLASSIFIED Member
- Total Posts : 4236
- Reward points : 0
- Joined: 2010/03/16 15:48:27
- Status: offline
- Ribbons : 3
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 13:57:59
(permalink)
|
KenMcC
CLASSIFIED Member
- Total Posts : 3329
- Reward points : 0
- Joined: 2010/07/02 07:02:23
- Location: Garland, TX
- Status: offline
- Ribbons : 21
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 14:03:35
(permalink)
LVCoyote, I and many others have been using this method for years. It is slightly different from XP, but it works in x64 Vista and Windows 7 x64 prof. I used it just last night. Stupid q by me... are you sure you typed or even copied and Pasted (that's what I did last night) the " set devmgr_show_nonpresent_devices=1 " command in Administrator mode of CMD. It does not work from "Run"
Go to Start, find the Command Prompt, right click and select Run as Administrator .
Let me know (perhaps it does not work in the HOME versions).
KenMcC Z170 Classy K; i7-6700 CPU, Corsair CMK16GX4M2A2400C14 Seasonic SSR-360GP 360W; Samsung 950 Pro M.2 256 GB Samsung 850 Evo 500 GB SATA Samsung 850 Evo 256 GB SATA Samsung SSD 840 Series 250 GB SATA Samsung 860 EVO 1 TB SATA Windows 10 x64 Prof.
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3040
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 14:06:17
(permalink)
I copy and pasted the entire line including FLAG/CMD, amd I not supposed to have that in there?? And yes I took out the quotes. I'm running Win7 Pro
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3040
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:VIA USB 3.0 Root Hub : Code 10
2011/06/17 14:10:27
(permalink)
Ok, I got it to work without the FLAG/CMD wording.
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
jcd4878
New Member
- Total Posts : 62
- Reward points : 0
- Joined: 2009/08/05 14:47:29
- Status: offline
- Ribbons : 0
Re:VIA USB 3.0 Root Hub : Code 10
2011/09/01 06:20:01
(permalink)
I am having this same exact problem and I am using the correct drivers, I even tried the lastest 1.50B drivers from VIA's website and it still does not work. All USB 3.0 ports are dead, plugging a flash drive into all four ports results in the flash drive not even being detected.
What else could be wrong?
-Jerry
|
jcd4878
New Member
- Total Posts : 62
- Reward points : 0
- Joined: 2009/08/05 14:47:29
- Status: offline
- Ribbons : 0
Re:VIA USB 3.0 Root Hub : Code 10
2011/09/02 06:49:52
(permalink)
Strange, I solved my own problem in a wierd way.
I unplugged my second GTX 580, and unplugged my Soundblaster XiFi and booted into Windows. The exclamation point went away and a additional VIA USB 2.0 hub installed. I plugged my flash memeory stick into all ports and they were all working.
I put back the second GTX580 and everything was okay.
I put back the Soundblaster XiFi so that it was now the same as when I was having the problem and guess what, everything was STILL okay.
This is very wierd, but I am happy it's working now. Is there some screwed up thing going on that the drivers fail to install with all these cards plugged in, but once they are installed, you can reinstall your cards and all is okay?
Just posting this here as something else to try if you have problems and have more than a video card plugged into the slots.
-Jerry
|
davevt31
FTW Member
- Total Posts : 1130
- Reward points : 0
- Joined: 2008/10/05 10:33:26
- Location: Johnstown, NY
- Status: offline
- Ribbons : 7
Re:VIA USB 3.0 Root Hub : Code 10
2011/09/02 09:47:51
(permalink)
Usually with any USB device issues in Device Manager, you can just delete the entry and do a rescan for new hardware and it will straighten itself out.
I have also used the show hidden devices thing for years. Not sure what he meant by flag/cmd unless he menat hit the windows key and open a command prompt. I have mine saved as a batch file and just run it as an administrator. Good for clearing out all those old volume shadow backup entreis that are no longer really there after a disk cleanup.
|
jcd4878
New Member
- Total Posts : 62
- Reward points : 0
- Joined: 2009/08/05 14:47:29
- Status: offline
- Ribbons : 0
Re:VIA USB 3.0 Root Hub : Code 10
2011/09/02 11:14:57
(permalink)
Yes, I did all that, followed this guide to the letter too, nothing fixed mine until I pulled all my cards cept one video, booted into Windows 7 once, and then reinstalled all my cards. Very strange.
-Jerry
|
joaks87
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2010/07/09 20:34:00
- Status: offline
- Ribbons : 1
Re:VIA USB 3.0 Root Hub : Code 10
2011/09/03 08:55:51
(permalink)
Try disabling USB 3.0 in the BIOS, boot into Windows, then reboot and re-enable USB 3.0.
|
ultima-krel
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2009/10/22 15:13:41
- Status: offline
- Ribbons : 0
Re:VIA USB 3.0 Root Hub : Code 10
2011/10/11 02:20:35
(permalink)
I am having the same problem, going to try removing my physx and pci x sound card when i get home and see if that sorts it
|
wearl85
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2011/08/26 18:11:24
- Status: offline
- Ribbons : 0
Re:VIA USB 3.0 Root Hub : Code 10
2011/10/11 06:31:06
(permalink)
the usb 3.0 controller on this board is a nec controller not via
Intel Core i7 2600K @4.8Ghz G.skill 8GB DDR3-2133 Asrock Z77 Performance Zotac GTX 680 AMP! Creative X-FI Titanium Fatl1ty Champion Series WD 1.5TB Caviar Black Corsair H70 Cooler Master Storm Scout Case 12X ASUS Blueray Burner Seasonic X-1250 1250 watt powersupply
|
projektrevolutn
New Member
- Total Posts : 60
- Reward points : 0
- Joined: 2011/11/11 22:11:57
- Location: Roseville, CA
- Status: offline
- Ribbons : 0
Re:VIA USB 3.0 Root Hub : Code 10
2013/06/09 10:39:36
(permalink)
joaks87
Try disabling USB 3.0 in the BIOS, boot into Windows, then reboot and re-enable USB 3.0.
Hey everyone, new to the forums here. Built my computer with z68 ftw board a year or two back now. ViaHub3.sys caused blue screen and I had to do an entire fresh install of windows and once I got it up and running VIA Usb 3 Root Hub device was giving me code 10. Followed the advice above by disabling usb 3.0 in bios, boot to windows, restart, enable usb 3.0 and now it works fine no problems so we will see how long it holds up. Thanks joaks87! Goodluck! Dom
|