Fittings: Chipset to CPU

Author
Post
Essentials Only Full Version
ILikeBeans
CLASSIFIED Member
  • Total Posts : 3128
  • Reward points : 0
  • Joined: 2006/05/22 17:27:11
  • Status: offline
  • Ribbons : 5
2010/11/23 01:21:23 (permalink)
Chipset to CPU Fitting Guide
 
Motherboard: Evga 4 way SLI 762 Classified  
Chipset block: EK-FB EVGA Classified 4-SLI
CPU Block: EK Supreme HF
All credit goes to AHowes for information and photos provided!

For the above.. From the EK Supreme HF block to the EK 762 4 way MB WB. 
 
From right to left, starting from the top of the CPU block and ending at the top of the MB block.
 
Bitspower G1/4" D-Plug Male / Male Coupler Set - Shiny Silver (About 3/4") (BP-WTP-C07)
1 Bitspower G 1/4" Silver Shiny Dual Rotary 90 Degree IG 1/4" Adapter (BP-90R2)
1 Bitspower Multi-Transfer Base (Coupler) - Set of 2 (BP-WTP-C03)
Bitspower Premium 1" Version Shiny Silver D-Plug Set (BP-WTP-C38)
1 Bitspower Multi-Transfer Base (Coupler) - Set of 2 - Black Matte (BP-MBWP-C03)
2x Bitspower IG1/4" Extender - Black Matte Finish (BP-MBWP-C40)
1 Bitspower G 1/4" Matte Black Dual Rotary 90 Degree IG 1/4" Adapter (BP-MB90R2)
Bitspower G1/4" D-Plug Male / Male Coupler Set - Matte Black (About 3/4") (BP-MBWP-C07)
Bitspower IG1/4" Extender - Black Matte Finish (BP-MBWP-C40) (Hard to see at the bottom) was needed to raise the MB side so its level with the CPU block.
 
NOTE: 
When doing this setup the orintation of the CPU water block. Its upside down so the "IN" port of the CPU block is on the side facing the memory slots. If you have it the other way the "IN' port would be on the other side and the fitting would not reach.. 
 
Motherboard: Evga E760 Classified 3-way SLI
Chipset block: EK-FB EVGA X58 Classified 
CPU Block: EK Supreme HF
All credit goes to AHowes for information and photos provided!


I used: From CPU Block top to the EK MB block top -
 
 Bitspower G 1/4" Silver Shiny Dual Rotary 90 Degree IG 1/4" Adapter (BP-90R2)
Bitspower Multi-Transfer Base (Coupler) - Set of 2 (BP-WTP-C03) 
Bitspower G1/4" Silver Shining IG1/4" Extender (BP-WTP-C40)
Bitspower Multi-Transfer Base (Coupler) - Set of 2 (BP-WTP-C03)
Bitspower G1/4" Silver Shining IG1/4" Extender (BP-WTP-C40)
Bitspower G 1/4" Silver Shiny Dual Rotary 90 Degree IG 1/4" Adapter (BP-90R2) 
Bitspower G1/4" Silver Shining IG1/4" Extender (BP-WTP-C40)
 
NOTE: The last fitting on the mB WB side is a extension used to rise that side so its level with the CPU WB. ALso note when doing this setup the orintation of the CPU water block. Its upside down so the "IN" port of the CPU block is on the side facing the memory slots. If you have it the other way the "IN' port would be on the other side and the fitting would not reach.. also the WB mounting post would be inthe way to go to the other MB WB port.
 
Motherboard:
Chipset block: 
CPU Block:
 
 
 
 
 
 
 
 
 
 
 
 

W7 64, EVGA X58 4-way SLI, I7 980x , EVGA GTX 780SC 2x, Corsair Dominator DDR3 2000 12GB, Samsung 840 Pro 256GB SSD, WD Velociraptor 1TB, HT Omega eClaro, Corsair AX1200W, Asus VG248QE-Glossy (thanks to CallsignVega @ Overclock.net) 3x Surround
#1

7 Replies Related Threads
    Holo
    CLASSIFIED Member
    • Total Posts : 3337
    • Reward points : 0
    • Joined: 2009/08/23 10:48:22
    • Status: offline
    • Ribbons : 4
    Re:Fittings: Chipset to CPU 2010/11/23 09:52:35 (permalink)
    Very nice.


      


    #2
    Clergy
    CLASSIFIED Member
    • Total Posts : 2296
    • Reward points : 0
    • Joined: 2008/12/27 14:45:40
    • Location: In A "Texas Flood"
    • Status: offline
    • Ribbons : 5
    Re:Fittings: Chipset to CPU 2010/11/23 11:43:46 (permalink)
    Looks great.


    #3
    canucker
    Superclocked Member
    • Total Posts : 102
    • Reward points : 0
    • Joined: 2007/06/21 10:00:25
    • Status: offline
    • Ribbons : 0
    Re:Fittings: Chipset to CPU 2010/12/24 07:16:51 (permalink)
    http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=59_346_393_616
     
    very nice guide,and i will reference this when i make my hard mount
    the link above shows some new-lengths of bitspower extenders that are going to prove very useful for this mod
    #4
    cj3waker
    FTW Member
    • Total Posts : 1071
    • Reward points : 0
    • Joined: 2007/12/17 00:02:46
    • Location: tahoe
    • Status: offline
    • Ribbons : 11
    Re:Fittings: Chipset to CPU 2010/12/24 15:19:37 (permalink)
    it seems like (2) rotary 90s and tubing would be much cheaper and easier. and  nicer aesthetically, imo

     ST75F-P 750W | P55 SLI | i5-760 | 2x4gb mushkin 1333 | GTX 480 SLI | OCZ Agility 120gb
    HEATWARE
    [URL=http://www.speedtest.net][/URL]
    #5
    seabigbear
    The Polar Rig Master
    • Total Posts : 20540
    • Reward points : 0
    • Joined: 2009/03/11 19:53:24
    • Location: Please use My Affiliate Code: >D4DLRM5OKA<
    • Status: offline
    • Ribbons : 61
    Re:Fittings: Chipset to CPU 2010/12/25 13:19:00 (permalink)
    Nice & cool!

    #6
    kiki5334
    ACX Member
    • Total Posts : 430
    • Reward points : 0
    • Joined: 2007/04/17 20:19:09
    • Status: offline
    • Ribbons : 0
    Re:Fittings: Chipset to CPU 2010/12/25 14:14:45 (permalink)
    +1 =)

    HeatWare




     

    #7
    NeoMuse
    New Member
    • Total Posts : 11
    • Reward points : 0
    • Joined: 2012/01/17 19:20:37
    • Location: U.S.A.
    • Status: offline
    • Ribbons : 0
    Re:Fittings: Chipset to CPU 2013/02/13 01:30:34 (permalink)
    Very Cool. Thx for sharing.

    #8
    Jump to:
  • Back to Mobile