EVGA X99 Series

EVGA X99 Series (p.4)
Post New Thread
Regular
Fastfwd226

x99 Micro new build stuck on BF code on boot

Hi all, So just finished my new build and im running into boot issues. I get error code BF on boot, it will hang on BF for about 10-15 seconds and then shut off. I have tested the PSU and graphics card independently on another PC and works fine. I cant test the ram as this pc is the only PC that can..
14
2016/10/30 15:03:09
iVVChewy9141VVi

Flight Sim Setup Question

Do you need to slipstream usb drivers on any x99 motherboard for the new 6XXX chip? like you have to do on z170..

2016/10/30 04:54:33
ValkyrieStar

Unofficial X99 BIOS Update

IntroductionSome of you may have read a few of my posts, in particular those about my lack of success running my memory at its 3200 XMP Profile. Recently I've been modifying BIOS's to add support for NVMe booting and other Samsung SSDs to be bootable. Out of curiosity, I updated the CPU MicroCode in..
30
2016/10/29 19:49:45
mektacular

x99 ftw k - ATX_PWR_6P - Do I need this if all graphics cards have dedicated power?

Just got this board and am working on fitting everything into it. It has a ATX_PWR_6P connection on the MB to provide additional power to the PCIE slots. I will only have powered graphics cards (980ti, 1070). It uses one of the 6 VGA power connections on the EVGA 1000 PSU (which I prefer to use to g..
6
2016/10/27 16:47:27
mauiknight

M.2 as Boot drive

I installed a Samsung 512gb PCI gen3x4 pm951 which shows up as a drive in OS but in bios fixed boot order there is no SSD option I have an x99 classified mb. How can I make this a SSD a boot drive? It does say that it is enabled in onboard device configuration, socket 3. Thanks for your help...
3
2016/10/27 04:59:33
arrow222

Evga x99 Ftw K compatibility problem

Hello I recently bought the x99 Ftw K and am getting error code CD, unable to post even with 1 stick of ram and cmos reset. Below are my specs, can anyone please advise if it's a cpu, bios or ram issue? Xeon e5 2630 v4 quality sample. 2015, week 33 version, same stepping and clocks ..
10
2016/10/26 12:26:30
Mousy

Failure to post. EVGA x99 Micro2

I have just tried to post the board for the first time and am getting a cycling series of numbers on the post code readout. They are going really really fast but I have tried to write them down in the order they appear as best I can. CEF 02 09 04 19 b0 This series just loops over and over..
21
2016/10/26 12:17:52
csrikant

X99-MACRO 2 PCIE slot4 not working non of the device are recognized in windows bios show

I have X99 macro2 MBI have issue in slot 4 devises or not recognised in windows.Bios show slot occupied withX4 device but noting seen on device manager. Scan Hardware. changes do not detect any HW change in windowsAm using W10X64 Enterprise. CPU I7-6850K (40 lane Cpu) Ram Ripsaws5 3200Mhz 11-14-14-3..
20
2016/10/24 14:29:11
bcavnaugh

What happens to your X99 Classified Motherboard when you spring a leak.

No Damage and I must have had this leak for at least a week before I found it. Click on Image twice for a Larger View.https://c3.staticflickr.com/6/5824/29530322434_0040eaf9e0_h.jpgNote: No Coolant leak inside the X99 PCIe Slot, only the Outside of the Slot.https://c7.staticflickr.com/9/8535/3004463..
41
2016/10/24 09:56:11

Use My Existing Forum Account

Username: Password:

Use My Social Media Account