EVGA Intel 5/6/7/8/9 Series

EVGA Intel 5/6/7/8/9 Series (p.3)
Post New Thread
Regular
Valentes

SR-X Error code 40

Win 10 start normally. The LED on the board always marks 40...
6
2016/11/08 12:42:27
yorktronic

Replacement for northbridge fan on an old X58 SLI motherboard?

Howdy, The small Northbridge fan on my X58 motherboard basically sounds like an old prop plane at this point -- I've tried to tighten the screws, put a little padding in as I thought it was the housing vibrating, but I think the fan itself is just super loud. The board performs fine, and has for yea..
6
2016/11/07 17:14:30
impulsive

X58 Classified E760-A1 rev 1.0 Westmere-EP QPI Mod guide request

Hi, I have the X58 Classified E760-A1 rev 1.0 and would like to perform the QPI Mod, I am having trouble locating any guides around on what i need to desolder/re-solder etc. there are plenty about for the E-758, but that has a different layout. I know it's a bit of an old board, but i feel like the ..
5
2016/11/05 07:49:31
rjohnson11

X58 STICKY INDEX to include overclocking/troubleshooting guides

Several of you have asked to have something stickied at one time or another. Stickies need to be evaluated by the mods and often times we like to keep that area clean. What I propose is a sticky index, a link to posts that you feel important and would like to keep around but are not stickies. So I w..
67
2016/11/04 07:39:18
marchino

X58 4 way sli classified and new network card Intel

Hi, I have just bought and installed a new network card, because marvell inside motherboard are old and impossible to have driver upgrade. Network card is a pci-e Intel I210-T1. No problem with Windows 64 bit and network card works very good. The only strange thing is that during th boot i see for o..
5
2016/11/04 06:49:25
ILikeBeans

one memory channel dead in my i7-980x?

Is it likely? All the memory modules are good. I don't see any bent CPU pins. If on module is installed in the 1st slot for triple channel, it is recognized and utilized by windows Edit: it no longer boots with only 1 stick in the slot 1If I install two more modules the 1st slot is recognized, but i..
18
2016/11/04 01:42:05
Reatork

X58 Classified3 surprise!!

I felt like taking a moment to share a supremely interesting story. Recently I was offered to purchase a X58 Classy3 with unknown CPU, 24Gb Corsair Vengeance 1600, & a CoolerMaster Seidon 120M from a friend for $100. A very decent deal. The computer had issues, mainly boot loops & on..
8
2016/11/02 15:29:56
_regnad_

Warranty question

EVGA Warranty Questions: http://forums.evga.com/fb.ashx?m=2573041..

2016/11/01 20:51:59
klutzy

X58 Classified (759) Increased CPU temps after RAM upgrade

I've been running 12GB (6x2GB) Corsair Dominator GT (1866MHz 7-7-7-20) on my original 759 X58 Classified rig for years. CPU temps at idle were in the upper 20s - low 30s on any given day. Under load the cores would head up into the 50s and 60s. Decided to max out the RAM on this MB and picked up 24G..
18
2016/11/01 08:46:26
MrBLoody369

EVGA SR-X not supporting more then 1 1080 .. o.0

EVGA SR-X not supporting more then 1 1080???? .. o.0 Is it time to head to MSI Premium products?..
7
2016/10/29 17:15:40

1 2 3 ..

Use My Existing Forum Account

Username: Password:

Use My Social Media Account