oops, Sorry, Double Post.....

Hmmm,, sounds good,l keep us posted.

In Regards to the EVGA EVBot, I have to tell You that using it to control the Four KPE's is MUCH Easier than the Classy Tool Software Method, Also I Think (But I'm Not Completely Positive with just One EVBot) You can change the Settings on All Four Cards While You are running the Benchmarks (I now see Why EVGA was forced to Discontinued it!)
 
With the 780i31.zip Firmware installed for the KPE's, I can control all the parameters INCLUDING Overvolt Protection settings of Normal/High/Extreme.
 
I'm Still Playing with the settings I want, But Here's a Pic of it attached to My KPE's AND a Video I Found on Youtube of the Firmware Menu on the EVBot I have.
 
Note that although it Dosen't show you on the Video, All of the Shown parameters are Adjustable!
 

 
 
 
http://www.youtube.com/wa...eature=player_embedded
 
 
 
 
 
 

Nothing Conclusive Yet, But here are the Results of Benching with only Two KPE's with a Dedicated 1600W PSU on Each Card at 1.4000v Vcore using the EVGA EVBot to get the First Fire Strike Score with puts me at Position #11 in The Futuremark Hall of Fame for 2-Way SLI.
 
Obviously, I can go Beyond the 1.35v Vcore Limit I Had with the Classy Tool Software Program using the EVBot.
 
http://www.3dmark.com/3dm/2809299
 

Got Position #9......
 
http://www.3dmark.com/3dm/2809766
 

FINALLY, I Just NOW Looked and Found out these were Finally IN STOCK at Newegg and so I Bought Two More Rosewill Hercules 1600W PSU's.
 
Hopefully I'll get them Next Week and then Find Out if a total of 6400W's on Four KPE's will be what I Need (And Probably Burn Down My House in the Process of doing it. LOL!)
 

 

 
http://www.3dmark.com/3dm/2810361
 

Man, It's a Good thing I bought those Rosewill Hercules 1600W PSU's at Newegg a few hours ago because they are Now "Out of Stock" Again!
 
You sure have to be Quick with the Card in Your Hand (and Know when the Item is available) if You want to get what You need!

 
EDIT:
Looks Like they have received some in Stock at Amazon Now, I guess Rosewill finally Built enough to ship some out, So I canceled my Order from Newegg and bought the same PSU's at Amazon for $100 LESS!
 
Alright!, This has turned out to be a GOOD Day for Me!
 

While waiting for the New PSU's, I was Looking on Ebay and found some 16GB (4 x 4GB) G-Skill Trident X DDR3 2666MHz Memory to replace the 32GB (4 x 8GB) G-Skill Memory I'm using now that hopefully should place less of a burden on the 4930K IMC to get Higher OC's.
 
 

Yeah, should be easier on the proc, the 32gb kit I recommended was the kit I used on my Dark, so I know it is solid, but a bit less may very well help for a higher clock.