some nice runs boys....
I dragged out the old GTX 295 the other day and ran it with the 4930k..... I may get around to putting the card on LN2!!
 
 
 
 

 

Looking good Hallowen. I see it's starting to come back to you now.

johnksss
Looking good Hallowen. I see it's starting to come back to you now.

Thanks, It may be coming back to me, But This ASUS UEFI Still has me "Experimenting" with more options than I did with My EVGA MB's!  

I just completely skipped over that whole UEFI stuff since Im not running anything that needs it.
Just loaded up Legacy mode and ran with it.

You Know......I Think I may be having some Problems with My Old Thermaltake Toughpower 1200W PSU, because NOW Every time I try to go a little higher than I have been on the Vbios or CPU Voltage or the CPU Bclk, The Whole System just SHUTS OFF (Not Crashes), even when I am just in the Desktop and Haven't even made any adjustments on Precision X or the Classy Voltage Tool!
 
Could High Oc's on the Two KPE's and 4930K be using THAT Much Power and causing the PSU to Shut Off?
 
EDIT:
I Just looked on my Newegg UPS Tracking for the Rosewill Hercules 1600W PSU, and it is "Out For Delivery" Here, So I Guess I will know Soon if it IS the Old PSU after I hook up the Rosewill to operate just the Graphics Cards and use the Thermaltake for only the CPU/MB! 

That happen to me with just one titan. I unplugged all the powers cords and plugged them all back in. it's been running great ever since. Check that out and see if it helps for now.
or
 
pull one card and run your exact same test and see if it still happens.
 
 
 
@sniper
I almost grabbed a 295 just to have. lol

The UPS Truck FINALLY Delivered My Rosewill Hercules 1600W PSU at 8:00PM (EST)!
 
I am Pretty Confident that This PSU has DEFINITELY Enough Power to handle JUST the Four OC'd EVGA GTX 780 Ti KPE's, While My Thermaltake Toughpower 1200W Should Easily be able to Handle the OC'd 4930K and ASUS RIV BE.
 
It is Quite a Beast!
 

 
 
 
 
 
 
 
 
 

 

We shall see in the weeks to come.

You guys ever have a set of OC's that seems solid... finishes benches well etc, then crashes RIGHT BEFORE you can take a screenshot? I've been finetuning for 6 hours trying to make this BSOD go away... And without fail every time I think it's gone and I do a successful run of vantage... BSOD right before I take a shot of it.
 
 
Been hitting at just below 34k the whole time, 3820@4.9GHz, 580@1040/2300MHz.