Those cards got some potential awall!

thinking about dropping some money on a kingpin NB-2 for some low profile benching........
 
i am pree famous around most of the PC shops in my city cos ima toshiba tech and they all know about my hobby i cna get the LP cards cheap/free most of the time....
 
i have so many scores atm that im not happy with that i would like to improve and this thing might do it for me :P

well i have done the rounds of the local computer store in town here and so far i have got........
 
8400GS
GT 240 DDR3
8500gt
2 x 9600GT
8600 GT DDR3 512mb
2x 9500 GT LP my gold cuppers :P
2 different GT210's
 
and i have about 3-4 store holding any more cards they get for me =D
 
total cost <$20
 

also i found a thread where nate is learning :) it SOOOOOO CUTEEE
 
 
BAHAHAHHAHAHA
 
im sorry

heeyyyy.....??  Im not perfect :P
 
 Btw... What am I learning?

your fist volt mod to the PNY 8500gt
http://www.overclock.net/t/669508/pny-8500gt-volt-mod-completed-verified
 

AHH YES... and my one and only gold.  That was all on air btw ;)

G00 Z 1.0
G00 X 10.811 Y 4.846
G01 Z -0.75 F12
G03 X 10.783 Y 4.785 R 0.035
G02 X 10.857 Y 4.776 R 13.924
G02 X 11.186 Y 4.404 R 0.375
G01 Y 0.188
G02 X 10.811 Y -0.188 R 0.375
G03 X 10.811 Y -0.25 R 0.031
G00 Z 1.0

i plan on knocking you to 3rd :)
 
also i am 12 and **** is this??
G00 Z 1.0 
G00 X 10.811 Y 4.846 
G01 Z -0.75 F12 
G03 X 10.783 Y 4.785 R 0.035 
G02 X 10.857 Y 4.776 R 13.924 
G02 X 11.186 Y 4.404 R 0.375 
G01 Y 0.188 
G02 X 10.811 Y -0.188 R 0.375 
G03 X 10.811 Y -0.25 R 0.031 
G00 Z 1.0 

I couldnt find my usb drive and just needed to transfer that segment of code to my CNC by opening up this thread on my machine & copy/paste.

Its the language my machine speaks in called G code. It skims half a thousandth of an inch off one side of my block with an end mill.