loveha

ty_ger07

johnksss

ok, but does this thing work as advertised at least?

Yes, it has been working good so far.

That Fuse to nothing would have me worried. I personally would have rewired it all my self.

This was the scariest part for me:

 
That's 110v, neutral, and ground coming in from the power plug.  The wires are just twisted around the terminals and glued into place.

I have re-wired it myself.
 
I just thought it showed badly on his part that he had no pride for his work.  Most of the electrical connectors were crimped badly so that I could just pull the wires apart by hand.
 
It's all soldered up and shrink wrapped now.

i hear ya. mine came jacked up from ups and i ended up having to rebuild the thing twice.

Man, that sucks.
 
Mine came with everything wired well and aside from ups manhandling it, there wasn't anything wrong with it =/

That is one scare looking 120V connection.  AB shut your thread down too. 

hey kow, i got the card!!!!!
 
all i can say is WOW!!!!! this thing is NUTS!
 
so far on air i have gotten 775 core 1700 shader and i havent touched memory yet trying to find out how to software change the mem voltage.
 
this thing is amazing,

 
  Success

i finally understand what nate is always on about with samsung memory.
 
i have 2 9500GT cards, 1 has no-name memory and it clocks to about 540 (from 330) and is on borderline artifacting.
 
the samsung is on 571 from 330 and no artifacts, but any higher it crashes. just needs moar voltage!!!!
 
 
working on the core/shader atm IM TAKING MY GOLD CUP!!!

btw if moar volts dont fix it USE A BIGGER HAMMER!

the good card taps out at 750/1850/571
 
not too bad for no voltage changes

bigger hammer... or bigger block of DICE :)