2012/04/06 03:00:51
nateman_doo
Then keep an eye on the thread:
http://forums.evga.com/fb.ashx?m=1496855
There are some milling videos too.
 
Going to try to finish the prototype soon!
2012/04/06 20:03:50
hellshealer
TheWolf

hellshealer

hey guys, i have a question for sme of the AMD users here,
i built a computer for a friend with an AMD FX4170 CPU (Quad @4.2ghz stock) and an asrock 970 extreme 3 board with 8gb of ddr3 1600mhz ram and for some odd reason it can only see 3.98 usable. i have reseated the ram a few times and in different configs but it still playing up. (also the fan is stupidly annoying)

any ideas on this i have played around with the settings for the ram and it still doesnt change. im thinking the CPU cooler might be too tight

Its probably the operating system your using. If its a 32bit system that be the reason why.
You'll need a 64bit OS to see anything over 4GB.

 
nah man it was a 64bit OS, the problem was a faulty ram stick >< it knew what it was but couldn't address it making only 4 gb (1 stick) usable. i figured it out when the bios said it was running single channel
2012/04/07 03:31:03
hellshealer
omfg who knew it was so hard to get tinyXP to boot from a USB drive. its taken me like 4 hours to even make it bootable ****!!!!!
 
looking ok now tho copying data now then to see if it works
 
2012/04/07 08:49:25
hellshealer
it didnt work QQ
 
2012/04/07 19:30:11
hellshealer
any1 got any tips for a 780i motherboard? i cant get over 500 FSB.
 
when i set it at 500 it puts the bios in safemode when it boots and wipes the OC
2012/04/07 21:11:56
nateman_doo
Wow, 780's bring me back to when I first started here.  Tried my first waterblock on a 780.
2012/04/08 06:19:30
hellshealer
yeah im thinking i might scrap my socket 775 gear........ no suppor anymore and i cant find a decent X48 or P45 to save myself.
 
ahh well sell it all for a profit and save up for ivy bridge
 
2012/04/09 20:11:19
nateman_doo
Some 580 milling:

2012/04/16 19:23:06
awalleyeguy
 Yeah I could have started a new thread but someone here will know. 
  Anyways I'm wanting some  Quick Disconnects for 1/2 inch tubing.Want suggestions so I don't get the wrong ones since they are a little pricey. This is pretty much all I come across.
2012/04/19 22:19:12
kowciller
Time for me to start benching again.
Just got this in the mail
 

 

 

Use My Existing Forum Account

Use My Social Media Account