guess im not that good

overclocker333

nice man.  I like the side profile, but that factory heatsink gives me the creeps

OC333 somebody needs more copper

I agree. 

hay guys i think i need moar rad?

Is that 480 for just the cpu and nb/sb/mofset? If so, you should be easily fine! lol
---------------------------------
Volk, i whipped up some waterblock stuff in Illustrator for ya (not any accurate measurements though...just using the pic):

The darker color is where the block would be "on the board." The yellow is where you would have copper tubing "bridging" the blocks over caps and whatnot.

I hope you like them!

1: Very radical design; probably would be hard to make. Single pass on small vreg, double pass on large vreg, nb, sb. 


2: Simplist design;would be easist to make. Single pass on both vregs, double pass on nb, sb. 


3: Hybrid with only 1 bridge between the seperate vregs; still hard to make probably. Single pass on small vreg, double pass on large vreg, nb, sb. 


4: Hybrid with only 1 bridge between the separate vregs; a little less complicated than #3. Single pass on both vregs, double pass on nb, sb. 

 
 
 
EDIT: Images not showing up right now...maybe imageshack is having troubles...idk. I will wait a bit and hope they come up.

Thanks alot for the ideas and the post man.. recommending BR for you 


The last design seems the most feasible and cost effective to me.  Also going with a dual pass over the mosfets seems like it kill flow and be unnecessary.

Yea i figured the double pass on the vreg(s) was a bit overkill. So the second and 4th seem the most plausible. Can you see the images by any chance? I still can't.
 
Here are the links just in case you can't see the pics:
 
1: http://i929.photobucket.com/albums/ad132/xxrabid93/bloodrage1copy.jpg
2: http://i929.photobucket.com/albums/ad132/xxrabid93/bloodrage2copy.jpg
3: http://i929.photobucket.com/albums/ad132/xxrabid93/bloodrage3copy.jpg
4: http://i929.photobucket.com/albums/ad132/xxrabid93/bloodrage4copy.jpg
 
EDIT: ****, the links don't work either, they give me the little X in a box.
 
Please tell me if you can't see them. If so, i can try uploading them to imageshack (i have an acount there and photobucket).

that would be a nightmare as far as getting fluid from both VR's to the NB/SB's.  Can you post that pic by itself? 
As far as simplicity, I hate to say separate blocks are always easiest.  Just stinks to have so many extra hoses.

Been talking to duniek, the guy who made the blocks i posted, he said its possible but would be crazy expensive.

I can see the pictures just fine in Chrome and FF, are you guys by any chance using IE?