Gray mole is still around huh?

Pushing the Ultra a little more, But I NEED those EVGA Classified Waterblocks...........
 

johnksss

Gray mole is still around huh?

 
Yeah he's helping me out over on XS with a design, not looking too bad right now. Preliminary plan is 2x 3/4HP compressors and maybe a Kayl evap. Shooting for -100C @ 300W load, would be happy with -90 though. 

I had plans t get a setup from him but it never went through. so I bought this one i had now and then learned how to basically work and fix it. Now it has a 12000 btu compressor and can hold temps at like -40 to -50C Under high load. I was thininking about doing a dual stage, but never got really into it since sandy can run off a single stage.

From this...

To this...

 

 
Ah Yes, I Remember Many Years Ago Like it was Yesterday..........
 

Who's setup is that?

johnksss

Who's setup is that?

 
Mine!
 
I Built This Two-Stage Phase Change back in 2004 when I was HEAVILY into Multiple Stage Systems for Sub-Zero Cooling My ABIT IT7 (as in the Photos) with an Intel 3.2 ES (LGA 478).
 
It uses R22 for the First stage that MUST bring the Temperature down below -50C in order to get the Second stage that uses Ethylene Gas (Yes, It can be used as a refrigerant) to be able to Start Cooling Down to -100C.
 
It was Fun Back then, But I haven't built any more Multiple-Stage Systems and have been content with My Single stage Setups.
 
If I want to get that Colder than -100C again, THEN I would Talk to Nate about some Pots!
 
 
 
 

What about some videocard blocks for those 580's?
I have been ACHING to make some full coverage blocks which tailor to OCer's with a few tweaks of my own.

Thanks Nate, I appreciate the Thought and I will get back to You on that!
 
I have a Lot on My plate right now and Today I should be receiving Four EVGA Classified Water Blocks w/backplates plus 3 and 4-way water block SLI connectors, an EVGA 4X 762 MB, The Fourth EVGA Classified Ultra, and an additional Thermaltake Power Supply.
 
I'll be Busy for the present time just trying to get All this together for Testing!