I hear ya there brother Doo.
 
Im waiting on my new laptop to show up now. Should be here next week...Hopefully.

I was just looking at the pure members.  You actually "outrank" Kingpin, and Sniper is 9th in the entire league.  I think thats awesome.

Huh.

 So when is natman going to bench again? I know he's busy with his milling and such, but dosn't he need to test the blocks? Not just for leaks but for performance? Just asking.

So boys, wanna help me out with pushing to around 4.7-4.9Ghz range? I'd love to be able to bench Vantage that high. Here's what I have now, stable for Wprime 1024m but not for Vantage. Load temps at 1.45V are ~70C on cores, not bad. I can run ice if needed though to take a few degrees off. Got a GTX 580 Classified Ultra coming in this next week and I want some heavy CPU clock for it. 

Mother Board ( EVGA X58 Classified 4 Way SLI E-762 ) 
CPU  (960) 
CPU Cooler ( EK HF Supreme on 6x120 rads ) 
Memory ( Corsair Dominator GT 2000 8 9 8 24 ) 
PSU ( ABS 1100W+CM 800W ) 
GPU ( GTX295+ X 2 ) 
Drivers ( 191.07 ) 
Operating System ( Windows 7 64 Professional ) 


Frequency Control 
CPU Clock Ratio ( 25X ) 
CPU Host Frequency (Mhz) ( 184 ) 
MCH Strap ( 1600 ) 
CPU Uncore Frequency (Mhz) ( 3670Mhz {20X } ) 
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 100 ) 


Memory Feature         
Memory Speed ( Standard ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1333Mhz / 2:10 ) 
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 8 ) 
tRCD Setting ( 9 ) 
tRP Setting ( 8 ) 
tRAS Setting ( 24 ) 
tRFC Setting ( 88 ) 
Command Rate ( 1t ) 


Voltage Control 
EVGA VDroop Control ( Without VDroop ) 
CPU VCore ( 1.45625 ) 
CPU VTT Voltage ( +200 ) Also works with +100 IIRC
CPU PLL VCore ( 1.200 ) 
**IOH PLL VCore ( 1.800 )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( +0mV ) 
QPI PLL VCore ( 1.100 ) 
IOH VCore ( Auto ) 
IOH/ICH I/O Voltage ( Auto ) 
**BR04 ( NF200) Voltage ( Auto ) (only on E-759) 
**VTT PWM Frequency ( 250 KHZ ) 
**CPU PWM Frequency ( 800 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Middle ) 
ICH VCore ( Auto ) 
*PWM Frequency ( Not Used on Classified ) 


CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Enabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recorvery ( Disabled ) 

 
EVGA VDroop Control ( Without VDroop ) 
CPU VCore ( 1.45625 ) 
CPU VTT Voltage ( +200 ) Also works with +100 IIRC  Lower if it works to high is as bad as not enough
CPU PLL VCore ( 1.200 )  1.3 or more won't hurt anything.
**IOH PLL VCore ( 1.800 )   1.6ish  The other one that is 1.8 lower it also to 1.6ish
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( +0mV ) 
QPI PLL VCore ( 1.100 )  Whats default on this one?
IOH VCore ( Auto ) 
IOH/ICH I/O Voltage ( Auto ) 
**BR04 ( NF200) Voltage ( Auto ) (only on E-759) 
**VTT PWM Frequency ( 250 KHZ ) 
**CPU PWM Frequency ( 800 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Middle )  Less!
ICH VCore ( Auto ) 
*PWM Frequency ( Not Used on Classified ) 
 
 I don't have a X58 board to look at bios so bear with me if something seems way off.

im gonna catch you halo.

 
 

Will update you guys tomorrow after my last exam. English, hate it. lol.
 
I found out though, I have a beast 295. It's a 295+ that can do 801/1250 on 1188mV. Not bad. Can do 810/1260 on 1200mV, didn't try 1188. Max load temps were around 40C, idle of about 35C. I have high hopes for this card on a Tek 9.

Then makes us all proud!