2011/08/15 18:45:41
awalleyeguy
 Thr best I did with 774/1242
2011/08/15 18:48:24
Halo_003
Huh. I'm at a loss as to why I'm missing so many points from my scores.
2011/08/15 19:01:55
awalleyeguy
 If you can swap cards around.
2011/08/15 19:25:14
Halo_003
Around in the slots you mean? Would plugging my DVI cable into the second card do anything? If not I'll have to try swapping them before I put blocks on. (One has an EK block, they're both going onto Heatkiller blocks though)
2011/08/15 19:28:30
Forgotton
i would isolate drop to 3 way SLI, and swap them out with the 4th card one at a time to be sure they are all scoring the same.
2011/08/15 19:32:31
awalleyeguy
Slots
2011/08/15 19:32:58
Halo_003
Forgotton

i would isolate drop to 3 way SLI, and swap them out with the 4th card one at a time to be sure they are all scoring the same.

 
If they were 285 Classifieds I would. I'm running 2 Dual PCB 295s. (2 cards, 4 PCBs, 4 GPUs) 
2011/08/15 19:41:24
nateman_doo
one card may be holding you back, also temps.
 
with great cold, comes great respon....err... clocks.
2011/08/15 19:56:21
Halo_003
That's a fair point Nate. I was pulling through Jane Nash at 756/linked/1242 on both cards, the one on air hit it's limit. But still, that is damn good on air with ~78F ambient temps. (IMO)
 
Before though, I didn't think it was a card limiting me, because it persists at stock clocks and overclocked. 
2011/08/15 20:05:09
johnksss
i was trying to find my post about the 295 and what it's suppose to do on air...do you remember what i said nate?

Use My Existing Forum Account

Use My Social Media Account