xxrabid93


My 480 can run 900-925 core and 1100-1125 mem on cold air for benching. And that was at 1138mv, it's max v in AB; and it's max temps were 38*C. It needs moar voltz!!! Based on the bot, that is pretty good for a card on air. I just wish i had a Sandy B*tch or 990x to run with it on ln2 to get some nice points.

 
Have you searched XS for an extreme version of afterburner?  Take a look

Q56_Monster

xxrabid93


My 480 can run 900-925 core and 1100-1125 mem on cold air for benching. And that was at 1138mv, it's max v in AB; and it's max temps were 38*C. It needs moar voltz!!! Based on the bot, that is pretty good for a card on air. I just wish i had a Sandy B*tch or 990x to run with it on ln2 to get some nice points.

Have you searched XS for an extreme version of afterburner?  Take a look

I could have sworn we've talked about this before. I used AB Volt Unlock and it let me set the voltage higher, but when applying, it would set back to 1138. That was a modded 2.0 iirc. Is the one you are talking about the modded 1.6? I am pretty sure i tried that too, maybe i'll have to try it again though.
 
Edit: Q do you have a copy of the 1.6 extreme version? I can't seem to find it anywhere...Maybe i didn't try it then.
Edit 2: Pretty sure i just found it on OCX.

xxrabid93

Q56_Monster

xxrabid93


My 480 can run 900-925 core and 1100-1125 mem on cold air for benching. And that was at 1138mv, it's max v in AB; and it's max temps were 38*C. It needs moar voltz!!! Based on the bot, that is pretty good for a card on air. I just wish i had a Sandy B*tch or 990x to run with it on ln2 to get some nice points.

Have you searched XS for an extreme version of afterburner?  Take a look

I could have sworn we've talked about this before. I used AB Volt Unlock and it let me set the voltage higher, but when applying, it would set back to 1138. That was a modded 2.0 iirc. Is the one you are talking about the modded 1.6? I am pretty sure i tried that too, maybe i'll have to try it again though.

Edit: Q do you have a copy of the 1.6 extreme version? I can't seem to find it anywhere...Maybe i didn't try it then.
Edit 2: Pretty sure i just found it on OCX.

 
I think you're right, we did talk about this before.
http://www.4shared.com/file/LoGJrjro/MSIAfterburnerSetup160x_Beta_6.html

 
 Well it seems I killed another 2600K. But this one at least still runs up to 4.7Ghz.
Yeah that one. Though I never could get it to boot above 5.6Ghz. 5.9 must have been a 1 time deal, CPU was brand spanking new then.
But I have another. Don't know how it clocks yet.

hold on there speed racer..
 
if your not going cold..then dont push the cpu hard..
 
most of us testing 2600k's are below zero and it usually takes only 2 minutes to know what the chip is.

 You are correct sir.
Just got a little antsy. It won't happen again.

what temp did it get up too. just curious
 

awalleyeguy

 
Well it seems I killed another 2600K. But this one at least still runs up to 4.7Ghz.
Yeah that one. Though I never could get it to boot above 5.6Ghz. 5.9 must have been a 1 time deal, CPU was brand spanking new then.
But I have another. Don't know how it clocks yet.

How to boot full speed?
 
BIOS says -25c
RealTemp says -9c
 
My CPU won't go above 12x multiplier though.  This is a i7 965EE and the multiplier is set at 29x.  The BIOS seems to think the CPU is overheating and won't let it run at full speed.  I have enabled Extreme Cooling mode (EVGA x58 SLI).
 

 
Boot up with the Phase Change off and then turn it on?

ty_ger07

How to boot full speed?

BIOS says -25c
RealTemp says -9c

My CPU won't go above 12x multiplier though.  This is a i7 965EE and the multiplier is set at 29x.  The BIOS seems to think the CPU is overheating and won't let it run at full speed.  I have enabled Extreme Cooling mode (EVGA x58 SLI).



Boot up with the Phase Change off and then turn it on?

 
Will it boot all at stock?

Halo_003

ty_ger07

How to boot full speed?

BIOS says -25c
RealTemp says -9c

My CPU won't go above 12x multiplier though.  This is a i7 965EE and the multiplier is set at 29x.  The BIOS seems to think the CPU is overheating and won't let it run at full speed.  I have enabled Extreme Cooling mode (EVGA x58 SLI).



Boot up with the Phase Change off and then turn it on?

Will it boot all at stock?

 
... Will get back to you.
 
The double pumping ... piece of ... EVGA board ...
 
I have to wait forever to do anything when minding the restart cycle time of the compressor.