uncore or uncore voltage maybe

Chip loves lots of VTT. Uncore didn't need too much when I ran it, it was always a bump above stock.
Could be too high of an uncore clock though. Really needs cold for it to shine. Have your temps been in check so far?

Yeah I'm maxing out in vantage around 67C on the cores, 71C for Cinebench but I only use that to test temps. I'll try higher VTT tonight and see how that goes.

Hey do you know what VTT it took for 4.8?

Not 100% sure. could have been 1.4-1.45. something like that.

Hmm alright I'll work on that this weekend then.
 
Nate and Q, once you turn an AC into a chiller can you turn it back to a working AC later on?

sure. if you dont alter to much

Halo_003

Hmm alright I'll work on that this weekend then.

Nate and Q, once you turn an AC into a chiller can you turn it back to a working AC later on?

I am not sure I would recommend it.  Depends on how much modifications you had to do to it.  I had to cut the shaft off where the blower was so that rendered it useless as an AC.  I would suggest you purchase an old one off craigs list or something like that to turn into a chiller.  5K BTU works well.

Heh well we have an old one I might have to mutilate. Will be a major PITA to do though lol.

idk, for all the hassle and how clean the core needs to be, the $100 A/C Units at Walmart look really tempting
 
On another note, I was temp testing my loop with all that copper with just the 655 and the temps sucked. I added a second res and a 355 pump out by the radiators and temps fell 10c at idle and it isn't even getting as close to what it was at load. Might have to pickup a second 655 for that res and hook em together and pull the 355 back out.