Hey John, Thanks for the gun scrubber tip.  Works great.  Just a few quick shots and it disolved the ceramique right out of my beloved REX's socket.
 
Great mobo if I can get to use it for any length of time.  Bad things keep happening to it.  First I almost killed it flashing BIOS...worked three hours to get it back.  Then I got two 3dm01 runs in on it @ 6.2Ghz....wicked quick success, but then condensation worked it's way somewhere...thought it was dead.
 
But it wasn't, so I took the chip out and got the ceramique in the socket
 
Next up is Q6600 action...hope to get 5ghz cpu-z now that the socket is cleaned out.

That template is my current vantage stable.. max temp on CPU cores is 63C, cores idle around 35C, actual CPU temp idles at 24.
 
Wish I hadn't lost my settings.. Ah with 1.5875 CPU Vcore it still freezes fast in Vantage CPU test 1, so I don't think it's a vcore problem..
 
Gonna call it a night for now, and get back on the climb to 4.6 again tomorrow. Any suggestions in between then and now though, of course will be much appreciated. And I'll likely read them around 2:30pm tomorrow before practice, then move to OCing afterwards.

Halo drop everything to auto.  set vcore @ 1.45 (should be plenty) 21*209.  You can leave the cpu features like you have them, but everything except vcore/multi/bclk on Auto.
 
See how it goes.  bump up vcore till stable on some vantage cpu tests

Halo_003

Update: Flashed to latest bios (78)

Frequency Control 
CPU Clock Ratio ( 21X ) 
CPU Host Frequency (Mhz) ( 215 ) 
MCH Strap ( Auto ) 
CPU Uncore Frequency (Mhz) ( 3446Mhz { 16X } ) 
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 109 ) 


Memory Feature         
Memory Speed ( XMP Profile 1 ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1067Mhz / 2:8 ) 
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 8 ) 
tRCD Setting ( 9 ) 
tRP Setting ( 8 ) 
tRAS Setting ( 24 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1t ) 


Voltage Control 
EVGA VDroop Control ( Without VDroop ) 
CPU VCore ( 1.5875 ) 
CPU VTT Voltage ( +450 ) 
CPU PLL VCore ( 1.800 ) 
**IOH PLL VCore ( 1.500 )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( +0mV ) 
QPI PLL VCore ( 1.450 ) 
IOH VCore ( 1.300V ) 
IOH/ICH I/O Voltage ( 1.650V ) 
**BR04 ( NF200) Voltage ( Auto ) (only on E-759) 
**VTT PWM Frequency ( 610 KHZ ) 
**CPU PWM Frequency ( 1210 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Middle ) <-- not on my bios.
ICH VCore ( 1.250 ) 
*PWM Frequency ( Not Used on Classified ) 
DDR Signal 0:  (+0)
DDR Signal 1:  (+0)
DDR Signal 2:  (+0)
CPU Signal:  (+0)
QPI Signal 0:  (+0)
QPI Signal 1:  (+0)
QPI Signal 2:  (+0)
PCIE Signal 0:  (+0)
PCIE Signal 1:  (+0)
CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Disabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recorvery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 4096 )  

  Aren't these your settings?

haha Awall to the rescue!  Everything's in the cloud somewhere, lol!

no problem Q!
and XtremeCuztoms put me up on that dragon skin stuff.
im going to go grab some tomorrow. it is said to be the best thing running. easy on and easy off. check my prep thread on kpc.

Q56_Monster
  Then I got two 3dm01 runs in on it @ 6.2Ghz....

what chip?!

johnksss
tribbs,
i too am waiting on that dice block attachment and will probably add the top extension as well.

 
Does the extension fit the Gemini, I was under the impression that is was bigger than the F1EE, it would probably still work, it just wouldn't fit tight

when ever parts are available...that is...:) the dice block is under testing now.

ah, I see how it is,  well I have a couple new toys being shipped to me from a friend, a bio-star 890fx mobo and a koolance dice pot that he is giving me, I just had to pay shipping and buy a cpu and some ram and they should all be here around the same day, hoping to see the max cpu frequency I can get out of it on dice, but it has been quite a while since I have even seen an amd board, but am looking forward to no cold bug.