After slowly climbing the VTT to +350, it now passes at 212x21. 1.5Vcore wasn't enough though, bumped it to 1.525.

9c is memory

johnksss

9c is memory

Sounds like you know your BSOD's off the top of your head.  Mine never stay long enough to know what the fail is. 
 

turn on error checking.
you have 
9c    memory
124  to much cpu vtt or not enough..i would back off cpu vtt when this shows up...first. unless your at 0
101    not enough voltage
a     hummm, this ones is a tricky one.
50      and so is thjis one
 
 

Here's as far as I've gotten stable..
 
Frequency Control  
CPU Clock Ratio ( 21X )  
CPU Host Frequency (Mhz) ( 206 )  
MCH Strap ( 1600 )  
CPU Uncore Frequency (Mhz) ( Auto )  
CPU Clock Skew ( 0 ps )  
Spread Spectrum ( Disabled )  
PCIE Frequency (Mhz) ( 102 )  


Memory Feature          
Memory Speed (Standard)  
Memory Control Setting ( Enabled )  
Memory Frequency ( 1067Mhz / 2:8 )  
Channel Interleave Setting ( 6 Way )  
Rank Interleave Setting ( 4 Way )  
Memory Low Gap ( Auto )  
tCL Setting ( 8 )  
tRCD Setting ( 9 )  
tRP Setting ( 8 )  
tRAS Setting ( 24 )  
tRFC Setting ( Auto )  
Command Rate ( 1t )  


Voltage Control  
EVGA VDroop Control ( Without VDroop )  
CPU VCore ( 1.4875 )  
CPU VTT Voltage ( +250 )  
CPU PLL VCore ( 1.500 )  
**IOH PLL VCore ( 1.500 )   
DIMM Voltage ( 1.65 )  
DIMM DQ Vref ( +0mV )  
QPI PLL VCore ( 1.450 )  
IOH VCore ( 1.300V )  
IOH/ICH I/O Voltage ( 1.650V )  
**BR04 ( NF200) Voltage ( Auto ) (only on E-759)  
**VTT PWM Frequency ( 610 KHZ )  
**CPU PWM Frequency ( 1210 KHZ )  
**CPU Impedance ( Less )  
ICH VCore ( 1.250 )  
DDR Signal 0:  ( -31 )
DDR Signal 1:  ( -31 )
DDR Signal 2:  ( -31 )
CPU Signal:  ( -62 )
QPI Signal 0:  ( -62 )
QPI Signal 1:  ( -30 )
QPI Signal 2:  ( -31 )
PCIE Signal 0:  ( -20 )
PCIE Signal 1:  ( -20 )
 

CPU Feature  
Intel SpeedStep ( Disabled )  
Turbo Mode Function ( Disabled )  
CxE Function ( Disabled )  
Execute Disable Bit ( Disabled )  
Virtualization Technology ( Disabled )  
Intel HT Technology ( Enabled )  
Active Processor Cores ( All )  
QPI Control Settings ( Enabled )  
QPI Link Fast Mode ( Enabled )  
QPI Frequency Selection ( 4.800 GT/s )  
OC Recorvery ( Enabled ) 

at 207 blck it just froze, about 15.6 seconds through vantage CPU test 1, no BSOD, just locked.

vantage cpu score?

Checking now..
 
@ 206x21
CPU Test 1: 3726.79 Plans/s
CPU Test 2: 32.96 Steps/s
 
CPU Score: 26362

http://kingpincooling.com/forum/showthread.php?t=1089
 
Saw this over in the enemy's camp  and may have to try it out, may have to modify my blockman special to do it, and i wish that kingpin would hurry up and finish that dice base for the gemini, ive been itching to get one.  

Just a reminder here to everyone that we need stock scores by the 14th.  The earlier the better for us.