it does, but it seems to do more throwing off of things than good..but you didn't hear tat from me...:)

johnksss

yeah. this one pretty much blended right on in at airgas..i just had the mini-me version...lol. but they said it was a good one. so i was happy about that. 
mine looks like these but without the ring around the top.


and that air port on the side makes getting the ln2 out fast without waiting for pressure to build over time.

what does your look like nate?

Stealing My Pictures Tsk Tsk :P
 
has anyone seen a big truck that carries Ln2? saw one 2 days ago didnt know they transported it in big trucks lol.

 Sure one of the terminator movies had a big truck with LN2.

lol@awall
 
halo
yeah, i had to hunt that one down in this thread.
and yes, i have seen trucks driving it around. now that i know exactly what it is...haha

awalleyeguy

 Sure one of the terminator movies had a big truck with LN2.

...and Mythbusters had one too when they froze that Christmas tree.

Update: Flashed to latest bios (78)
 
Frequency Control 
CPU Clock Ratio ( 21X ) 
CPU Host Frequency (Mhz) ( 215 ) 
MCH Strap ( Auto ) 
CPU Uncore Frequency (Mhz) ( 3446Mhz { 16X } ) 
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 109 ) 


Memory Feature         
Memory Speed ( XMP Profile 1 ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1067Mhz / 2:8 ) 
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 8 ) 
tRCD Setting ( 9 ) 
tRP Setting ( 8 ) 
tRAS Setting ( 24 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1t ) 


Voltage Control 
EVGA VDroop Control ( Without VDroop ) 
CPU VCore ( 1.5875 ) 
CPU VTT Voltage ( +450 ) 
CPU PLL VCore ( 1.800 ) 
**IOH PLL VCore ( 1.500 )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( +0mV ) 
QPI PLL VCore ( 1.450 ) 
IOH VCore ( 1.300V ) 
IOH/ICH I/O Voltage ( 1.650V ) 
**BR04 ( NF200) Voltage ( Auto ) (only on E-759) 
**VTT PWM Frequency ( 610 KHZ ) 
**CPU PWM Frequency ( 1210 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Middle ) <-- not on my bios.
ICH VCore ( 1.250 ) 
*PWM Frequency ( Not Used on Classified ) 
DDR Signal 0:  (+0)
DDR Signal 1:  (+0)
DDR Signal 2:  (+0)
CPU Signal:  (+0)
QPI Signal 0:  (+0)
QPI Signal 1:  (+0)
QPI Signal 2:  (+0)
PCIE Signal 0:  (+0)
PCIE Signal 1:  (+0)
CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Disabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recorvery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 4096 )  

Halo_003

Update: Flashed to latest bios (78)

Frequency Control 
CPU Clock Ratio ( 21X ) 
CPU Host Frequency (Mhz) ( 215 ) 
MCH Strap ( Auto )  1600
CPU Uncore Frequency (Mhz) ( 3446Mhz { 16X } )  Auto
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 109 ) 


Memory Feature         
Memory Speed ( XMP Profile 1 )  don't use XMP profiles manual OC
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1067Mhz / 2:8 ) 
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 8 ) 
tRCD Setting ( 9 ) 
tRP Setting ( 8 ) 
tRAS Setting ( 24 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1t ) 


Voltage Control 
EVGA VDroop Control ( Without VDroop ) 
CPU VCore ( 1.5875 ) 
CPU VTT Voltage ( +450 )  +250
CPU PLL VCore ( 1.800 )  1.425
**IOH PLL VCore ( 1.500 )   1.425
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( +0mV ) 
QPI PLL VCore ( 1.450 )  1.3
IOH VCore ( 1.300V ) 
IOH/ICH I/O Voltage ( 1.650V )  1.350
**BR04 ( NF200) Voltage ( Auto ) (only on E-759) 
**VTT PWM Frequency ( 610 KHZ ) 
**CPU PWM Frequency ( 1210 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Middle ) <-- not on my bios.
ICH VCore ( 1.250 )  1.2
*PWM Frequency ( Not Used on Classified ) 
DDR Signal 0:  (+0)
DDR Signal 1:  (+0)
DDR Signal 2:  (+0)
CPU Signal:  (+0)
QPI Signal 0:  (+0)
QPI Signal 1:  (+0)
QPI Signal 2:  (+0)
PCIE Signal 0:  (+0)
PCIE Signal 1:  (+0)
CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Disabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recorvery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 4096 )  

I gave you some good signals awhile back, can't remember off the top of my head.

Thanks Threed, testing those now. Btw, it was on Standard, not XMP 1, I just wrote it wrong.
 
Oh and for IOH/ICH i/O voltage, lowest I can go is 1.500 not 1.350.
 
Regarding signals.. I lost them after flashing lol.

DDR Signal 0:  (+0) -31
DDR Signal 1:  (+0) -31
DDR Signal 2:  (+0) -31
CPU Signal:  (+0) -62
QPI Signal 0:  (+0) -62
QPI Signal 1:  (+0) -30
QPI Signal 2:  (+0) -31
PCIE Signal 0:  (+0) -20
PCIE Signal 1:  (+0) -20
If you lose your ram there's a setting in the memory I think it needs be to be set to -4 I found it in the evga x58 overclocking section
Hope it helps
Also I don't do those stupid 24hr cpu testing programs so that could make a difference as well.

With those settings... (Above settings, not the signals)
 
First boot attempt: Hung at b2
Second boot attempt: Hung at F3
Third Boot attempt: Hung at F3