yay, my dewar is on it's way! woohoo.
 
Q56
dont let nate fool you...that's how he rolls as well..he just forgot is all....lol
 
vokl
nice to see you got your phase back!!
i am now tearing apart mine and giving it a needed upgrade. hopefully it will be partially done by the end of the week.

Q56_Monster

nateman_doo

Q56_Monster

Frost on the endplate?!  good lord man, put the towels away and get some foam.

Hehe, that's how we run

and how me 

Curious If I could get in on this or if there were any spots open. I'm known to throw some #'s down every once in a while.

EleSSaR
CPU: i7 980x
GFX: GTX 480 x1
Cooling: Chiller
 
I have 4 cards available so I can run all four, three, two or one whatever you need. Do quite well with 4 though rougly 58k vantage with phyx disabled.

johnksss

yay, my dewar is on it's way! woohoo.

Q56
dont let nate fool you...that's how he rolls as well..he just forgot is all....lol

I thought you had a dewar? 
 
heh.  Yea its been a while-since April??.  But I know it hasn't been that long for me to know I don't get that much frost all over the place.  You guys and your shop towels.  bleh!  lay on the insulation! 
 
Speaking of lack of benching, this machine is taking up so much of my time.  It took me FOUR HOURS tonight to shim the ZX, & ZY axis planes of travel.  I wouldn't recommend building a CNC machine to ANYONE that doesn't have that kind of attention to detail.

nateman_doo

johnksss

yay, my dewar is on it's way! woohoo.

Q56
dont let nate fool you...that's how he rolls as well..he just forgot is all....lol

I thought you had a dewar? 
well. i do have one..it just hasn't gotten here yet...lol
what i do have is a F! gemini
brand new compressor & condenser for my phase
15 lbs recovery tank to help with changing cpu conditions. (that drew is a smart one)
heh.  Yea its been a while-since April??.  But I know it hasn't been that long for me to know I don't get that much frost all over the place.  You guys and your shop towels.  bleh!  lay on the insulation! 
oh yeah, lets see your last batch of pictures buddy..i dont believe you...lol
Speaking of lack of benching, this machine is taking up so much of my time.  It took me FOUR HOURS tonight to shim the ZX, & ZY axis planes of travel.  I wouldn't recommend building a CNC machine to ANYONE that doesn't have that kind of attention to detail.

yeah, you are a man on a mission!! i would have gotten side tracked by now :D

Scroll back a few hundred pages, I haven't used a single shop towel ;)

EleSSaRBLS

Curious If I could get in on this or if there were any spots open. I'm known to throw some #'s down every once in a while.

EleSSaR
CPU: i7 980x
GFX: GTX 480 x1
Cooling: Chiller

I have 4 cards available so I can run all four, three, two or one whatever you need. Do quite well with 4 though rougly 58k vantage with phyx disabled.

Why are you not on the EVGA Hwbot team?!

Thanks for the detailed pics Q most helpful.
 
Had the chance the other day to try the pot, it held better than I thought. Load temp with a 260gtx was -50 to -45c as long as I kept an eye on it. It ate through the DICE real fast due to lack of mass. I put my pot on my 9500gt, 9600gt and 260gtx. I wasn't able to break any of my records, going from WC to DICE on a GPU is a new ball game to say the least. Took me 2hrs to figure out I needed to use stock volts to surpass my WC overclocks. I've got some kinks to workout for my next session, hopefully I'll be able to get some boints!
 
Pic's of session.
http://www.overclockaholi...id=10&pictureid=38
http://www.overclockaholi...id=10&pictureid=37
http://www.overclockaholi...id=10&pictureid=36
http://www.overclockaholi...id=10&pictureid=35
http://www.overclockaholi...id=10&pictureid=34
http://www.overclockaholi...id=10&pictureid=33
 

what pic of session??
 
nate:
i tried looking, but thats a whole lot of looking...lol
 
side note:
dewar made it home. now to go and check to see if i can start right away or have to do some modding.....

refresh your page