Well I got it stable with 191 blk. I will post a pic as soon as I get back home have to go pick up the wife.
I used these setting
Mother Board ( EVGA X58 Classified E-760 )
Bios ( S61J )
CPU ( 960 DO)
CPU Cooler ( Cooler Express Phase Change )
Memory ( Corsair Dominator GT 1600 7 7 7 20 )
PSU ( Thermaltake 1000w)
GPU ( EVGA GTX 580 Black Ops)
Drivers ( 263.09 )
Operating System ( Windows 7 x64 Ultimate )
Frequency Control CPU Clock Ratio ( 25x )
CPU Host Frequency (Mhz) (
191 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 105 )
Memory Feature Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1066 / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( Auto )
Command Rate ( 1T )
Voltage Control EVGA VDroop Control (
WITHOUT VDroop )
CPU VCore (
1.61v ) CPU VTT Voltage (
+200mv )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( Auto) (+0mV)
QPI PLL VCore ( Auto )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
ICH VCore (1.100)
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
CPU Feature Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s )
OC Recovery ( Enabled )
PnP/PCI PCI Express Maximum Payload Size ( 128 )
Power Management Setup ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )