Halo_003

Alrighty guys, I can get a TRUE 120 Black for $40 shipped. Should I? 226W TEC would be sandwiched between Apogee GTZ CPU waterblock and it. (Cold side would face CPU block ofc, hot side would be on the TRUE. What kind of temps would that give?

 
You going the TEC route?
 

nateman_doo

DENTNU

Ok well I tryed every suggestion on here and I still can not get it to be stable on 191 Blk. Its a hit and miss somtimes its stable it sometimes I get BSOD 101 or 124. I went all the way to 166 vcore and 325 vtt and still nothing.

NEVER give up, just take some time to re-group.  Last I recall I didn't bench anything LESS then 300 Vtt.  I noticed the higher I went the more I added to VTT and it worked.  I think at one point I was around 450 and up in the 5GHz, but don't quote me- its been SUCH a long time.  I haven't benched since last MAY!  

 
Yea I woke up thinking about this since I had a bad nightmare just about benching lol  then I saw your post. Its to bad I had to work if not I would have started benching this morning. I will most likely try to later on once I get home from work if not tomorrow. 
 
Thanks for the  comment 

My pleasure.  I would suggest getting one of those EVbots- makes life so much easier. 

nateman_doo

Halo_003

Alrighty guys, I can get a TRUE 120 Black for $40 shipped. Should I? 226W TEC would be sandwiched between Apogee GTZ CPU waterblock and it. (Cold side would face CPU block ofc, hot side would be on the TRUE. What kind of temps would that give?

You going the TEC route?

 
Tempting it wouldn't really cost all that much, maybe $100 range. For 24/7 chilled water. But I wonder what kind of temps it would give..

Not sure about TEC cooling Halo, you might try over @ XS or that Chillernr1 guy building the SR-2 with TEC they should help you out...

**** when Force recalculate on Hwbot my score went from 246 to 192???

I'm just curious as to what kind of temps it'd get. If I could get ya know, 10C or so that would be nice.
 
Edit: seems I lost the quote I made of Nate.. Oh well.

threedhero

**** when Force recalculate on Hwbot my score went from 246 to 192???

 
Oh boy...now why'd you go and do that?  I just added up your points...192.8.  Are there any that are obviously missing?  PM Massman and see what he has to say.  Screen shot your sig quick just so he knows where you were.

Alright new idea, what if you take a Corsair H50/H70, use it to cool the hot side, and the put the coldside facing the Apogee GTZ block(Would be using this in line with main CPU loop).
 
So the sandwich would look like this...
 
120mm fan(For H50 rad) - H50 <-- Hotside/Coldside --> Apogee GTZ
 
While the whole CPU loop would be like:
 
MCP 355 --> Apogee GTZ(TEC)--> EK Supreme HF(CPU) --> MCP 355
 
Ideas on temps? If they're low then I'll definitely look into it lol.

Q56_Monster

threedhero

**** when Force recalculate on Hwbot my score went from 246 to 192???

Oh boy...now why'd you go and do that?  I just added up your points...192.8.  Are there any that are obviously missing?  PM Massman and see what he has to say.  Screen shot your sig quick just so he knows where you were.

 
Thanks for lookng into it Q, I'm wating on about 50 points for 2D benchmarks to calculate. Plus I over looked a SuperPI 32m worth 10, so once those go through calculation I should be square. I remember after my session last time it took about a 1-2 days before they went through. I'll have to keep an eye on them the next 2 days. These say no pints and the wPrime 1024 4.1 is global waitng for 18 points on that one.  They are on my submission page but not my points page yet, we'll see.

SuperPi - 8sec 187ms - Threedhero (EVGA Enthusiasts) - (Intel Core i7 920 @5006MHz)
no points (2) 1078456
SuperPi - 8sec 687ms - Threedhero (EVGA Enthusiasts) - (Intel Core i5 750 @4836MHz)
no points

SuperPi 32m - 7min 45sec 375ms - Threedhero (EVGA Enthusiasts) - (Intel Core i7 920 @4901MHz)
no points wPrime 1024m - 2min 35sec 687ms - Threedhero (EVGA Enthusiasts) - (Intel Core i7 920 @4860MHz)
4.1 points