DENTNU

Ok I need some help. I raise my overclock to 4.8 Ghz and went all the way up to  1.65 vCore. It always Freezes a little over the start of CPU Test 1 of vantage. Any suggestions as I think I need to raise something other than vcore as I saw almost no difference when I raised it litle by little all the way to 1.65v . My blood was pumping alot lol

Try going down a notch on the blck.  You went from 189'ish up to 193.  Try 190 or 191 raising vcore a little at a time.  Then 192. 25 or 50mhz can make a big difference believe it or not, so try not to shoot for too much at once.
 
When it freezes, is there a BSOD?  If so, what code?  101 is general more vcore, 124 is generally more vtt.  If it just hangs there and you can push ctrl-alt-del to get out and back to the desktop, then it didn't like the voltage and just stopped running.  If you wait long enough, it might BSOD and give you a code.  I don't like to wait too long if running higher vcore and just exit out of it.

Will try your suggestion as soon as i get home thanks

lol well I just found out my CPU @ 1.6vcore doesn't get above 75C in vantage. Good to know the loop can handle it well.

ok was able to do a run with my CPU at 190 blck here is a pic. Thanks Q56 I guess it is a googd idea to start low then raise it little by little.  
 
http://www.flickr.com/photos/56392831@N07/5212434565/lightbox/
 
 
Going to keep on pushing

Nice. If you go to options you can select which tests to do btw.

Good call Halo 
 
Yeah, Dentnu, turn those feature tests off.  I didn't even notice that...after physx test you should be done and not have to suffer through all those meaningless tests.
 
Great job on 35k+

hey q, just tried your bio and it's still locked at 1.138. (from mvktech)
 
haha, but then...that's you bios and not the modded one. *facepalm*
 
 
side note:
 
looking very nice dentnu. keep up the good work.

haha...good one John   You already know all the BIOSes I'm/we're working with.....I just wanted to have my original tweaked up a bit...
 

yeah, thats what i did when i was tying my reply
 
that blackops one seems alright though...
 
side note:
so far...none of them are beating my stock one...so far...grrrrrrrrrrrrrrrrrrrrrrrrrr
which makes me think...the voltage isn't working or i need it colder.

@-60c my gpu went nowhere.  locked itself in at 1000/1125 no matter what the temps.  We need one of two things....more voltage, or a lucky card....I'll take either, lol!