anyone know alienwares warranty on overclocking?

EDIT

well that was fast...dentnu. 

yea sorry but had to delete my last message so I can be more sure about the outcome of those settings you posted 
 
I am having problems as I have no idea if the setting you posted do give me some higher scores  or not. As my scores go all over the place for emaple
 
1.P34584 
2.P34452
3.P34258
 
SO I have no idea if those 3 setting you told me to change actually give me better results or worst as sometime my score will be about the same for 2 test in a row and on my 3 test its allot less or the opposite. I am very confused. I am still at 4.5ghz as I wanted to see if I got some improvement by just changing those 3 setting. Can you explain what those 3 setting actually do and effect by setting them to those settings  ?

they help stabilize a higher over clock. your still at 4.5...

LOL  you could not have said it better I feel dumb right now. going to raise my overclock now . . . 

lol
mah bad!
i apologize!!

LOL don't worry about it.
 
Well I overclocked here are the setting I used but when I got to CPU test 2 my computer rebooted itself.
 
Frequency Control  
CPU Clock Ratio ( 25x   )                                              
CPU Host Frequency (Mhz) ( 189 )                                 
MCH Strap ( Auto )  
CPU Uncore Frequency (Mhz) ( Auto )                                
CPU Clock Skew ( 0 ps )  
Spread Spectrum ( Disabled )  
PCIE Frequency (Mhz) ( 100 ) 

Memory Feature          
Memory Speed ( Standard )  
Memory Control Setting ( Enabled )  
Memory Frequency ( 1066 / 2:8 )                              
Channel Interleave Setting ( 6 Way )  
Rank Interleave Setting ( 4 Way )  
Memory Low Gap ( Auto )  
tCL Setting ( 7 )  
tRCD Setting ( 7 )  
tRP Setting ( 7 )  
tRAS Setting ( 20 )  
tRFC Setting ( Auto )  
Command Rate ( 1T )  

Voltage Control  
EVGA VDroop Control ( WITH VDroop )  
CPU VCore ( 1.5000v )       1.5 or higher with v-droop                                                 
CPU VTT Voltage ( +100mv )  
CPU PLL VCore ( 1.35 )  
**IOH PLL VCore ( 1.35 )   
DIMM Voltage ( 1.65 )  
DIMM DQ Vref ( Auto) (+0mV)  
QPI PLL VCore ( 1.200 )  
IOH VCore ( 1.35 )  
IOH/ICH I/O Voltage ( 1.55 )  
ICH VCore (1.2) 
**VTT PWM Frequency ( 250 KHZ )  
**CPU PWM Frequency ( 800 KHZ )  
**CPU Impedance ( Less )  
**QPI Signal Compensation ( Less )  

CPU Feature  
Intel SpeedStep ( Disabled )  
Turbo Mode Function ( Enabled )  
CxE Function ( Disabled )  
Execute Disable Bit ( Disabled )  
Virtualization Technology ( Disabled )  
Intel HT Technology ( Enabled )  
Active Processor Cores ( All )  
QPI Control Settings ( Enabled )  
QPI Link Fast Mode ( Enabled )  
QPI Frequency Selection ( 4.800 GT/s )  
OC Recovery ( Enabled )  

PnP/PCI     PCI Express  
Maximum Payload Size ( 128  )  
  
Power Management Setup  
ACPI Suspend Type ( S3 )     
HPET Support ( Enabled )       
HPET Mode ( 64-bit )   
 
 
I am going to start to raise my ICH VCore little by little to see if I can pass cpu test 2. let me know if you have any other suggestions. . . 
 
 
Thanks
 
 

These are the final setting I tryed before I called it quits as I always either get a crash in CPU test 1 or CPU test 2.I did not keep pushing on my core voltage as I don't know if it will be safe anything above where I had it at .
 
Frequency Control   
CPU Clock Ratio ( 25x   )                                               
CPU Host Frequency (Mhz) ( 189 )                                  
MCH Strap ( Auto )   
CPU Uncore Frequency (Mhz) ( Auto )                                 
CPU Clock Skew ( 0 ps )   
Spread Spectrum ( Disabled )   
PCIE Frequency (Mhz) ( 100 )  

Memory Feature           
Memory Speed ( Standard )   
Memory Control Setting ( Enabled )   
Memory Frequency ( 1066 / 2:8 )                               
Channel Interleave Setting ( 6 Way )   
Rank Interleave Setting ( 4 Way )   
Memory Low Gap ( Auto )   
tCL Setting ( 7 )   
tRCD Setting ( 7 )   
tRP Setting ( 7 )   
tRAS Setting ( 20 )   
tRFC Setting ( Auto )   
Command Rate ( 1T )   

Voltage Control   
EVGA VDroop Control ( WITH VDroop )   
CPU VCore ( 1.518v )                                                    
CPU VTT Voltage ( +100mv )   
CPU PLL VCore ( 1.35 )   
**IOH PLL VCore ( 1.35 )    
DIMM Voltage ( 1.65 )   
DIMM DQ Vref ( Auto) (+0mV)   
QPI PLL VCore ( 1.200 )   
IOH VCore ( 1.35 )   
IOH/ICH I/O Voltage ( 1.55 )   
ICH VCore (1.3)  
**VTT PWM Frequency ( 250 KHZ )   
**CPU PWM Frequency ( 800 KHZ )   
**CPU Impedance ( Less )   
**QPI Signal Compensation ( Less )   

CPU Feature   
Intel SpeedStep ( Disabled )   
Turbo Mode Function ( Enabled )   
CxE Function ( Disabled )   
Execute Disable Bit ( Disabled )   
Virtualization Technology ( Disabled )   
Intel HT Technology ( Enabled )   
Active Processor Cores ( All )   
QPI Control Settings ( Enabled )   
QPI Link Fast Mode ( Enabled )   
QPI Frequency Selection ( 4.800 GT/s )   
OC Recovery ( Enabled )   

PnP/PCI     PCI Express   
Maximum Payload Size ( 128  )   
   
Power Management Setup   
ACPI Suspend Type ( S3 )      
HPET Support ( Enabled )        
HPET Mode ( 64-bit )    
 
Got any other suggestions ? ? ?

Frequency Control    
CPU Clock Ratio ( 25x   )                                                
CPU Host Frequency (Mhz) ( 189 )                                   
MCH Strap ( Auto )    (1600)
CPU Uncore Frequency (Mhz) ( Auto ) (16x)                                 
CPU Clock Skew ( 0 ps )    
Spread Spectrum ( Disabled ) <-- might wanna try enabled. It's worked for me before.   
PCIE Frequency (Mhz) ( 100 )   <-- 105. IF you are not running SSDs.