threedhero

@ Q I thought the OCP mod for GPU-z was like a softmod for the OCP on the card. Could be wrong since I'm don't have a 580 and unable to try it myself.

So how was the first time using Ln2 with your Tek-9 and F1? Bet it seemed like you had 10 pots going lol

 
It is a softmod, but does nothing for increasing over clocks.  Our team mate Asylum asks the question to the creator in this thread
 
Yea, I thought 1 pot was bad, 2 had my head spinning.  Sometimes I'd be looking at the screen but pouring in the wrong pot, lol..... and **** things up by hitting my cpu's CB  You really have to concentrate...or have helpers like the big guys do.  No way you can manage 5 or more pots by yourself.

Happy thanksgiving guys. 
 
No benching till later alright? lol.

Happy thanksgiving!  All of you get off the computer and spend time with your families!

I would rather not spend time with my extended family if I can avoid it. 
 
Have a happy Thanksgiving all!

happy TG to all!

Happy Thanksgiving!

Hi everyone really nice thread you got here.  I was wondering if someone could help me pass my CPU 4.5ghz mark.  I have tryed a few times to raise my CPU higher than this but its like it hit a wall and can never get it 100% stable once I go over the 4.5ghz. Johnksss advised  me to make a post here to see if someone could help me out. 
Thanks 
 
Here is my current template that I have been using for the past 6 months and it is 100% Stable
 
                                                                                             
Frequency Control 
CPU Clock Ratio ( 25x   )                                             
CPU Host Frequency (Mhz) ( 181 )                                
MCH Strap ( Auto ) 
CPU Uncore Frequency (Mhz) ( Auto )                               
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 100 )

Memory Feature         
Memory Speed ( Standard ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1066 / 2:8 )                             
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 7 ) 
tRCD Setting ( 7 ) 
tRP Setting ( 7 ) 
tRAS Setting ( 20 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1T ) 

Voltage Control 
EVGA VDroop Control ( WITH VDroop ) 
CPU VCore ( 1.46875v )                                                     
CPU VTT Voltage ( +100mv ) 
CPU PLL VCore ( 1.35 ) 
**IOH PLL VCore ( 1.35 )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( Auto) (+0mV) 
QPI PLL VCore ( 1.200 ) 
IOH VCore ( Auto ) 
IOH/ICH I/O Voltage ( Auto ) 
ICH VCore (1.100)
**VTT PWM Frequency ( 250 KHZ ) 
**CPU PWM Frequency ( 800 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Less ) 

CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Enabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recovery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 128  ) 
  
Power Management Setup 
ACPI Suspend Type ( S3 )    
HPET Support ( Enabled )      
HPET Mode ( 64-bit )  
 

DENTNU

Hi everyone really nice thread you got here.  I was wondering if someone could help me pass my CPU 4.5ghz mark.  I have tryed a few times to raise my CPU higher than this but its like it hit a wall and can never get it 100% stable once I go over the 4.5ghz. Johnksss advised  me to make a post here to see if someone could help me out. 
Thanks 

Here is my current template that I have been using for the past 6 months and it is 100% Stable

                                                                                            
Frequency Control 
CPU Clock Ratio ( 25x   )                                             
CPU Host Frequency (Mhz) ( 181 )                                
MCH Strap ( Auto ) 
CPU Uncore Frequency (Mhz) ( Auto )                               
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 100 )

Memory Feature         
Memory Speed ( Standard ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1066 / 2:8 )                             
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( Auto ) 
tCL Setting ( 7 ) 
tRCD Setting ( 7 ) 
tRP Setting ( 7 ) 
tRAS Setting ( 20 ) 
tRFC Setting ( Auto ) 
Command Rate ( 1T ) 

Voltage Control 
EVGA VDroop Control ( WITH VDroop ) 
CPU VCore ( 1.46875v )       1.5 or higher with v-droop                                                
CPU VTT Voltage ( +100mv ) 
CPU PLL VCore ( 1.35 ) 
**IOH PLL VCore ( 1.35 )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( Auto) (+0mV) 
QPI PLL VCore ( 1.200 ) 
IOH VCore ( Auto )  1.35
IOH/ICH I/O Voltage ( Auto )  1.55  higher for better gpu scoring
ICH VCore (1.100) 1.2 up to 1.3 to stabilize cpu test 2 of vantage 
**VTT PWM Frequency ( 250 KHZ ) 
**CPU PWM Frequency ( 800 KHZ ) 
**CPU Impedance ( Less ) 
**QPI Signal Compensation ( Less ) 

CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Enabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 4.800 GT/s ) 
OC Recovery ( Enabled ) 

PnP/PCI     PCI Express 
Maximum Payload Size ( 128  ) 
 
Power Management Setup 
ACPI Suspend Type ( S3 )    
HPET Support ( Enabled )      
HPET Mode ( 64-bit )  

thanks johnksss will try in a bit those settings 

no problem.