no...my cbb is @ -120c.  Plus I let things warm up to just below 0c, and still no go.  Maybe RAM slots are too wet...  I'm just glad my cpu is ok....I don't care about anything else.
 
Hopefully I'll be back in business by tonight.

that BIOS debug 68, 69 I always thought it to be a mem problem...
if the M/b is still posting....which it is, it should be fine.
 
do you run Jelly in the dim slots??
also as John stated above cbb could be a problem although it looks like you may have warmed it all up....... try hiting the dimms with a hair dryer....
 
then again I could be wrong...Gee LN2 definetly throughs some curve balls Hay...good luck

threedhero

Perhaps you've blown a cap or mosfet on the motherboard it's self or you have you have water somewhere causing a short.
Maybe try unplugging the PSU power from the board and taking out the battery for 10-20 minutes to let all the power out of the caps and mosfets....
If that doesn't work try taking the ram out and heating the slots, could be too much jelly in the ram slots and/or pci-e slot...
Have you tried each stick of ram one @ a time?

5.7GHz for 06 is awesome great F-ing job Q!!!
Also I thought I read somewhere 06 degrades the 980x not 100% on that but you said the CPU still works....

 
Don't tell me that!!  That was my first '06 run at those clocks.  I imagine I can go higher.  But yea, cpu work like a charm in my x58 laptop, so cores & IMC ok.  Yea, I tried 1 stick at a time and in different slots, all different configs.  There's water somewhere, I'm sure.  I didn't have pb in the ram slots, but I did in the pci-e slot.

Sorry bro I hope it's not the board but hey it could happen....
You'll need jelly in the first ram slot at least maybe second as well...
Even my DICE runs go wacky with no jelly in the ram slots so Ln2 should be worse..

SniperOZ

that BIOS debug 68, 69 I always thought it to be a mem problem...
if the M/b is still posting....which it is, it should be fine.

do you run Jelly in the dim slots??
also as John stated above cbb could be a problem although it looks like you may have warmed it all up....... try hiting the dimms with a hair dryer....

then again I could be wrong...Gee LN2 definetly throughs some curve balls Hay...good luck

 
Yea, this is my third time, and it's thrown a curve ball every single time  It's definitely not like turn the chiller on and forget it about it.  I didn't even get to watch that '06 run...just watching temps and carefully pouring making sure I don't hit my CB's.  I memorized my total frames on each test then jotted them down when it was done, lol!  It's hard work, man!

Here's the thread where some guys are talking about staying away from 06 and wPrime 1024 @ high volts. Have to read through to find the info but just wanted you be to beware...
http://www.xtremesystems....howthread.php?t=260503

I think splave was just joking around about that, threed.
 
Looks like water in the ram slots...drying out now

Back in business!  As soon as I get these dang kids to bed, I'm be back to benching, lol.
 
This time I am overloaded with PJ in every crevice I could find.....no comments please, lol.

Q56_Monster

Back in business!  As soon as I get these dang kids to bed, I'm be back to benching, lol.

This time I am overloaded with PJ in every crevice I could find.....no comments please, lol.

lol... must resist temptation...
 
Awesome news, waiting to see some insane scores buddy.

told you about that pj. great stuff to say the least!! it has saved my board more times than i can count!! not to mention my 980x/975/965/920.
i love the evga rma process, but i sure as hell hate using it!! so pj has been my next best friend...lol