say...is all your memory showing up in the bios?
and did you use pj in the cpu socket?

yup and yup

Letting it warm up now, tried at zero a few times and nothing last time it booted it was at 12 degrees so im going to wait a few, what good does it do though if I cant boot at -60 how am I supposed to push the chip I dont have any OS tools for that.

you better get to using nvidia system tools for that...lol
or have you tried that already>?

nvidia system tools for fsb?

This boards not supported anyway

yup
some of that stuff controls the whole board...i just dont know which boards.
but we use to use it all the time on laptops with nforce chipsets

johnksss

try losing some voltage and see what happens...

xxrabid93 

Guys, i just lost the wprime 1024m WR for the q9300. This is the result:http://hwbot.org/community/submission/1043355_blackout51_wprime_1024m_core_2_q9300_2.5ghz_5min_16sec_356ms 
His ram is 377mhz 5-5-5-5, he posted the actual speed though. So he didn't hit 754mhz lol. 
Does that actually look like it could beat mine:http://hwbot.org/community/submission/1019322_xxrabid93_wprime_1024m_core_2_q9300_2.5ghz_5min_18sec_351ms 

I have big doubts about his score... 

 




big doubts huh....


377x2 is 754.
and since the bot is on the fritz..i cant really see his scores...

wow, you're about 600 mhz higher at that.

Lol, i know his actual ram speed is 754mhz. What i meant was he is at 377x2. Like all my results have ram speeds in the 500s; but 500x2=1000. I just couldn't word it right i guess. My ram is at 5xx x2 = 10xx though. So i have faster ram with similar timings, and as you said, my proc is 600+mhz faster than him.

it's been quite a few times i couldnt beat certain people with super low timings over high mhz. ill give it a look over when we can see the pictures again.

xxrabid93

johnksss

try losing some voltage and see what happens...

xxrabid93 

Guys, i just lost the wprime 1024m WR for the q9300. This is the result:http://hwbot.org/community/submission/1043355_blackout51_wprime_1024m_core_2_q9300_2.5ghz_5min_16sec_356ms 
His ram is 377mhz 5-5-5-5, he posted the actual speed though. So he didn't hit 754mhz lol. 
Does that actually look like it could beat mine:http://hwbot.org/community/submission/1019322_xxrabid93_wprime_1024m_core_2_q9300_2.5ghz_5min_18sec_351ms 

I have big doubts about his score... 

 




big doubts huh....


377x2 is 754.
and since the bot is on the fritz..i cant really see his scores...

wow, you're about 600 mhz higher at that.

Lol, i know his actual ram speed is 754mhz. What i meant was he is at 377x2. Like all my results have ram speeds in the 500s; but 500x2=1000. I just couldn't word it right i guess. My ram is at 5xx x2 = 10xx though. So i have faster ram with similar timings, and as you said, my proc is 600+mhz faster than him.

ok, so after looking at his screen shot...your settings aren't even close...lol
he is running a 
5-5-5-5-1 and im pretty sure the other settings you dont see which count for a about a second..are with using memset or cpu tweaker
5-5-5-15-68 is really...not in the same ballpark.
you find this right combo with your over clock...you'll smash through his score.
i have faith in ya!!

I'm sorry, the hwbot entry you've requested has been removed. 
[ go home ]


It's gone now rabid you've got the WR again.