pwnzorz

i plan to use a different resevoir.

Oops... sorry I forgot!
 
My new sugestion:  http://www.skinneelabs.com/Pumps/DDC/XSPC/DualTop/XSPC_DualDDC.html
 

overclocker333

pwnzorz

i plan to use a different resevoir.

Oops... sorry I forgot!
 
My new sugestion:  http://www.skinneelabs.com/Pumps/DDC/XSPC/DualTop/XSPC_DualDDC.html
 

BTW... those are the barbs I use with 7/16" tygon... very clean looking... maybe not as slick as the black Bitspower compresion... but wuite a bit cheaper!  Hve you added up your fitting costs yet... maybe you would like to put that money someehre else... or not.  lol.

i'm going to be using compression fittings on the pump aswell...
the compression fittings alone for a basic setup is gonna cost about 110-120bucks, any other special snazzy ones will come later
Can that pump you links be used with compression fittings?

wouldn't that pump be a bit much for my setup? maybe i should consider that in a future revision? :P

voklskier4452

that tubing is just fine.. make sure to get the proper fittings and you are good to go.. also you will need a couple of worm drive clamps (or something similar) for the connection to the pump

 
NO... NO... NO... do not use worm drive or any other type of clamp... you are asking for trouble and they are ugly to boot!
 
Compression or no clamps at all... just my opinion of course. 

what about tubing would 20ft be enough and some extra? for that huge mountain mods case? i can't see using more than 20ft
even with some errors here and there.

the pump top that i linked can be used with any fittings you desire as long as they are G1/4"

@overclocker.. what is this sissy dual pump top i see??
http://www.frozencpu.com/..._Replacement_Top_.html

read it and weep


I used only 15' with my first water order and i still have extra.. but it really depends on your planned loop..

worm drives are pure, what is this blasphemy you are speaking overclocker?

what about a CPU Waterblock? i see alot of mention of the Heatkiller ones? they seem very popular, how are these 
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_498_199&products_id=26001

looks pleasing to the eye, since my theme is black and red to match the Evga Classified.
but will my Compression fittings fit, since those 2 g1/4's look kinda close.

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_498_490&products_id=26784
O.o that looks sexy too

pwnzorz

wouldn't that pump be a bit much for my setup? maybe i should consider that in a future revision? :P

What pump... please use the quote feature... really helps.
 
If you are talking about the  pump top I posted it come in a single or triple version I think.  one of the reasons I like the rez combo is it makes it very easy to mount in a bay and doesn't cost that much more than the top alone... who says you can't have two rezs... I think that would look cool... the one in the bay and the $150 showpiece on the inside!
 
You might want to take your time on ordering anything... let it sink in... do some shopping get the most for your money.  There are a lot of great products out there... too much to take in in one day.  You can always pay the restocking fee of course if you don't like the items or change your mind... lol.