i didn't buy anything yet, i would like to be able to use Compression fittings on the pump, any recommendations for a strong pump to run 3 rads 2 cards and 1 cpu?
that i can attach g1/4 compression fittings to?
Are you proud of me Nate/overclocker? I'm learing stuff

well with the D5 you have two options..

buy a replacement pump top like i mentioned above.. or go the more drastic (and permanent) route, chop off the plastic barbs and then tap the openenings so you can use G1/4" barbs of your choice

give me a tubing size, i'll find the fittings and tubing, OD and ID, i'll find it.

voklskier4452

overclocker333

voklskier4452

sure you could get some CM fans, but the ultra kaze will blow them away (literally).  plus with the fan controller you can simply turn them down to a volume level you like, and then when you need the extra juice you can crank them up to 11.  Also don't forget to factor in that the fans i suggested are a 38mm fan and pwn the CM fans in static pressure ;)

First person that has agreed with me on that... smart... very smart!  Even smarter with 250cfm Deltas!  But at least you can use an average controller with the Kaze... not so with the Delta's

i done be edumacated... and the fan controller i linked is pretty beastly, 3amps 45w per channel will handle most fans.. for example, these:  http://www.weirdstuff.com/cgi-bin/item/18097

but maybe not these babies:
http://nz.mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMvuXzJ9NcThaqeMpAuNMYK5eDEIFf7toLQ%3d

Your KILLING me man!  Those Mousers are 48v! 24v is however the the only option that I know of  for the 140mm rads... some one needs to make some high flow 12v 140mm fans!!!  Delta 370cfm or something ridiculous like that at 12 volts still rocks... I'm just not sure how low you can turn them down before the stop spinning.

i'm gonna go with that pump you linked, it looks like its the same pump i was buying except modded with that top.

overclocker333

voklskier4452

overclocker333

voklskier4452

sure you could get some CM fans, but the ultra kaze will blow them away (literally).  plus with the fan controller you can simply turn them down to a volume level you like, and then when you need the extra juice you can crank them up to 11.  Also don't forget to factor in that the fans i suggested are a 38mm fan and pwn the CM fans in static pressure ;)

First person that has agreed with me on that... smart... very smart!  Even smarter with 250cfm Deltas!  But at least you can use an average controller with the Kaze... not so with the Delta's

i done be edumacated... and the fan controller i linked is pretty beastly, 3amps 45w per channel will handle most fans.. for example, these:  http://www.weirdstuff.com/cgi-bin/item/18097

but maybe not these babies:
http://nz.mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMvuXzJ9NcThaqeMpAuNMYK5eDEIFf7toLQ%3d

Your KILLING me man!  Those Mousers are 48v! 24v is however the the only option that I know of  for the 140mm rads... some one needs to make some high flow 12v 140mm fans!!!  Delta 370cfm or something ridiculous like that at 12 volts still rocks... I'm just not sure how low you can turn them down before the stop spinning.

muhaha... I have $10 on the fact that you pick those up before the end of the year

pwnzorz

give me a tubing size, i'll find the fittings and tubing, OD and ID, i'll find it.

MCP 655 has 1/2" barbs stock


the link i had is only a pump top, you still need the pump

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_346_393_614&products_id=26555
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_413_414&products_id=2729

how do those look together?
those walls seem alittle thin, but whats your opinion guys?

voklskier4452


i done be edumacated... and the fan controller i linked is pretty beastly, 3amps 45w per channel will handle most fans.. for example, these:  http://www.weirdstuff.com/cgi-bin/item/18097

The Delta blows that fan away... 250cfm for the same noise!  Delta ROCKS... and people that say they are too noisy don't know squat!!! They have some of the best cfm/noise ratios around... find me something better?  250/66= 3.75... that is awsome!!!

i know someone that blows better, about 5'7, green eyes, red hair.

pwnzorz

whats your opinion on
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_413_414&products_id=21659

I told you my opinion... 7/16" tygon r3603 on 1/2" barbs... if you are using compression go for 1/2" barbs and whatever tubing works... I have no clue because I have never used them... not saying I won't I just love the quality and price of the smaller tubbing on larger barbs.
 
 
1/4"... no way!!!