BENCH THE CARDS!  the doo shop is SOO busy the past few weeks.  Man if I only had a clone to help out. 

bench the cards on full air and you should be fine.

johnksss 

bench the cards on full air and you should be fine. 

 


+1. Just don't do anything like crazy like 1200mV for the 295 etc.

take that long drive you were telling me about get some dice and whale on those cards

haha, well it seems unanimous. Ya, i'm gonna bench them. I probably would have without asking, but the push from you guys always helps. Oh, and the card i thought was an 8600gt actually is a 9800gt ee (once i pulled it out i obviously saw what it was).

What should be the highest mV i should push the 295 on air?

@Halo: I get the cards as long as i take to fix up the systems. I worked on them today, and both seem to have bad PSU's, but i think i'll wait a week or two to tell my family friend.

@reggie: i wish i could throw them under some DICE. But i have no gpu pot. I'm still looking for a cheap one. *cough*Nate*cough*

you can still jack up your vantage score with a dice cpu score

Halo_003

johnksss 

bench the cards on full air and you should be fine. 

 


+1. Just don't do anything like crazy like 1200mV for the 295 etc.

But these go to 11....

xxrabid93

What should be the highest mV i should push the 295 on air?

Mine were like John's and Nate's...they could go 1200 on air, 1300 on H20. To be safe you could just use Evga VT and just go to max 1188.  I wouldn't waste too much time getting up to 1188 either.

Making some head way with my 920, at 3c it will start taking higher volts and in turn letting me reach a higher bclock. Haven't dug into very much busy weekend.
Thought I might have trouble with my koolance 345 CPU block since its 3 pieces but it works like a charm. I don't even need to cover up the lock down bolts, makes for easy tear down.

xxrabid93

haha, well it seems unanimous. Ya, i'm gonna bench them. I probably would have without asking, but the push from you guys always helps. Oh, and the card i thought was an 8600gt actually is a 9800gt ee (once i pulled it out i obviously saw what it was).

What should be the highest mV i should push the 295 on air?

@Halo: I get the cards as long as i take to fix up the systems. I worked on them today, and both seem to have bad PSU's, but i think i'll wait a week or two to tell my family friend.

@reggie: i wish i could throw them under some DICE. But i have no gpu pot. I'm still looking for a cheap one. *cough*Nate*cough*

Stick some extra DICE in front of the cards intake. 

Q56_Monster

Halo_003

johnksss 

bench the cards on full air and you should be fine. 

 


+1. Just don't do anything like crazy like 1200mV for the 295 etc.

But these go to 11....

Ha I've unlocked my VT so I can go to 2000mV.

Halo_003
  Ha I've unlocked my VT so I can go to 2000mV.

Let me know if you can get over 1313mV