CPU Clock Ratio ( 20X )
CPU Host Frequency (MHz) ( 210 )
MCH Strap (DRAM) Try auto
CPU Uncore Frequency (MHz) ( auto )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 108 )Probably does not need to be this high
Turb Performance (Disabled)
Extreme Cooling (Disabled)

Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 7 ) ?
tRCD Setting ( 8 ) ?
tRP Setting ( 7 ) ?
tRAS Setting ( 20 ) ?
tRFC Setting ( 88 ) ?
Command Rate ( 1T ) ?

Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.53)
CPU VTT Voltage ( +250 )May not have to be this high and then again maybe not high enough
CPU PLL VCore ( 1.500 )
DIMM Voltage ( 1.65 )      Try what Natman says then see if you can bring it down
DIMM DQ Vref ( +0 )
QPI PLL VCore ( 1.25 )
IOH VCore ( 1.375 )Unless you are running HIGH end video cards should not have to be this high
IOH/ICH I/O Voltage ( 1.625)This up one for every two on IOH
ICH VCore ( 1.25 )Unless you are having problems booting cause you have like 8 hard drives this can be left on auto
PWM Frequency ( 1067 )

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 GT/s )

 Thats my .02

my CPU VTT is usually no less then +300.  and yea, just start with the pci-e around 100

AutomatedBeef

he means the RAM voltage not vcore

Man I hope he got that.... 

AND as promised, the cool picture I wanted to share with you guys:

Wasn't sure first time about the ioh and ioh/ich but I think I've got it now. getting lockups at windows loading screen now.

CPU Clock Ratio ( 20X )
CPU Host Frequency (MHz) ( 212 )
MCH Strap (auto)
CPU Uncore Frequency (MHz) ( auto )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) (106)
Turb Performance (Disabled)
Extreme Cooling (Disabled)

Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting (8)
tRCD Setting (8)
tRP Setting (8)
tRAS Setting (8)
tRFC Setting (24)
Command Rate (2T)

Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.53)
CPU VTT Voltage ( +200 )May not have to be this high and then again maybe not high enough
CPU PLL VCore ( 1.500 )
DIMM Voltage ( 1.700 )      Try what Natman says then see if you can bring it down
DIMM DQ Vref ( +0 )
QPI PLL VCore ( 1.25 )
IOH VCore ( 1.200 )Unless you are running HIGH end video cards should not have to be this high
IOH/ICH I/O Voltage ( 1.550)This up one for every two on IOH
ICH VCore ( auto ) Tried 1.20 & 1.30     Unless you are having problems booting cause you have like 8 hard drives this can be left on auto
PWM Frequency ( 1067 )

nateman_doo

AutomatedBeef

he means the RAM voltage not vcore

Man I hope he got that.... 

AND as promised, the cool picture I wanted to share with you guys:

Sweet. Haven't lost any body parts yet?

COOOOOOOL

CPU VTT Voltage ( +200 )May not have to be this high and then again maybe not high enough  +.300 and see if you can lower v-core

DIMM Voltage ( 1.700 )      Try what Natman says then see if you can bring it down Try like 1.67 might be that 1.65 isn't really putting out 1.65

Most likly the problem is here  Freezing is often mem related I think.
All speculation of course.

awalleyeguy

CPU VTT Voltage ( +200 )May not have to be this high and then again maybe not high enough  +.300 and see if you can lower v-core

DIMM Voltage ( 1.700 )      Try what Natman says then see if you can bring it down Try like 1.67 might be that 1.65 isn't really putting out 1.65

Most likly the problem is here  Freezing is often mem related I think.
All speculation of course.

Alright thanks awall, I'm also going to try ram at stock settings 9-9-9-26-74. They are rated for 2000mhz so I don't understand why they are being such a pain.

awalleyeguy

COOOOOOOL

COOOLLLLLD!  DAMN COLD :P

that is pure LN2 goodness coming out of my dispenser.  Should probably post that under the dispenser thread

No, this is THE thread for that.....who was holding it & who was taking the pic?