very nice!!

Great Job awalleye!  Now that the right folks like you are benching these cards, Fermi will start to live up to its hype.

@ Q chiller looks great good job man.
@ walleye great job on the gold

you guys have been busy

@ everyone I know its not realistic to buy another monitor for this but I run real temp on a second monitor to get realtime temps. I spent some time testing with and without the second monitor and real temp and beleave it or not I found the second monitor and the extra program running have next to no effect on the cpu test. I think it has something to do with vantage forcing a realtime or High affinity in your os thats just a guess though.

Q great job. I'm very impressed that you didn't have any problems with condensation, although that that much insulation I shouldn't be lol.

Awalleye awesome score man! Looks like the 470s will be between a 285 and a 295.

here are some initial test with 3 x 470 sc
cpu is a 4.0ghz, cards are at 675core 1701memory, physx off


i can tell that the cpu is holding these cards back a lot, and these should be interesting with to see how they clock once i get them on water and change the voltage around, did a test with physx on earlier and the cards were stable at 750mhz on the core but the score wasn't all that good since i need to get my cpu back to 4.5ghz

Edit: here is the hwbot link
http://hwbot.org/communit...0_27393_marks?new=true
my first gold cpu ever

ajr23

here are some initial test with 3 x 470 sc
cpu is a 4.0ghz, cards are at 675core 1701memory, physx off


i can tell that the cpu is holding these cards back a lot, and these should be interesting with to see how they clock once i get them on water and change the voltage around, did a test with physx on earlier and the cards were stable at 750mhz on the core but the score wasn't all that good since i need to get my cpu back to 4.5ghz

Edit: here is the hwbot link
http://hwbot.org/communit...0_27393_marks?new=true
my first gold cpu ever

your on water right?


you should be able to pull off a 4.2 to 4.5 or so.
with right like conditions.....


and your conditions are looking right like...:)


1: only test cpu test 1
2: try to over clock to 4.1 ghz


if she completes...


3: add 2 more mhz and repeat test or jump strait to 4.2


if it completes...


run full test for a new record....


in your case...you probably can start right at 4.4 and get back to your 4.5

reggiesanchez

@ Q chiller looks great good job man.
@ walleye great job on the gold

you guys have been busy

@ everyone I know its not realistic to buy another monitor for this but I run real temp on a second monitor to get realtime temps. I spent some time testing with and without the second monitor and real temp and beleave it or not I found the second monitor and the extra program running have next to no effect on the cpu test. I think it has something to do with vantage forcing a realtime or High affinity in your os thats just a guess though.

I have two monitors, and I generally shut the other one down when benching. Mostly because when you overclock this card with dual monitors it freaks out and gives you all kinds of tearing. I monitor my temps via the POST screen on my Evga board, so that makes it really easy.

What you could do is write down\remember the difference between your water temp and GPU\CPU temps at full load, than monitor your water temp coming out of the return tube.

thanks for the info johnksss, i think i need to redo my since im fairly sure theirs an air pocket somewhere in my cpu block, and i also need to change the fittings since the 90degress are killing the flowrate.  may try some test late with one and two cards and try to get some more cups before everyone else.

HWbot #1 Single GTX 295! Chiller FTW!

great job q

hey rudster I have no problems running two monitors just get tearing when I clone the monitors if I extend the desktop then its fine