Really wasn't worthy of a screen shot.  So I didn't feel like going through all the trouble.  I had my cell phone out. 

Just figured This is the first time I have benched quad SLI in MONTHS.  Finally all my RMA's were back, everything was prepped and trying out a few new things.  Not bad for a nights benching.  I feel like I got a much better board this go around.  Finally back up to 2:10 mem.  Only 1645 more points to go right? 

Rudster816

Couldnt resist

are you practicing for the BAR exam or something?

nateman_doo

Rudster816

Couldnt resist

are you practicing for the BAR exam or something?

In didn't know you had to take an exam before ordering a beer. Now I could see Rudster needing to take an exam after he's finished at the bar,

he's not old enough to drink

nateman_doo

did someone say they needed a CPU block?  

Yepper!

Well, this is what I'm going with.  Had an eyeopener last night.  Thanks John for the tip on running the liquid through the block first before firing it up!  Way too much condensation.  The pci-e connector froze up pretty good.  Hopefully when current is going through it, some of the connection condensation won't happen....I think this should do it.

I might run it on my 780i board first, just to be sure.

Eraser the PCIE Socket area just to be sure.

Rudster816

Eraser the PCIE Socket area just to be sure.

+1. I will when running DICE. 

And Q, that looks epic. Front page worthy IMO!

That block looks so much easier to insulate then mine.  You can probably bundle both your lines in a single 1" pipe insulation.  You are going to be unstoppable with that chip and those cards frozen. 

& what does 6021 mean?

Q56_Monster

nateman_doo

did someone say they needed a CPU block?  

Yepper!

Well, this is what I'm going with.  Had an eyeopener last night.  Thanks John for the tip on running the liquid through the block first before firing it up!  Way too much condensation.  The pci-e connector froze up pretty good.  Hopefully when current is going through it, some of the connection condensation won't happen....I think this should do it.

I might run it on my 780i board first, just to be sure.

man! that looks like a super job on insulation!!

Rudster816

Eraser the PCIE Socket area just to be sure.

Like this Rud...