Did you set the extreme cooling in the bios or set the jumper?

I personally haven't ever used that jumper.  Does that allow the board to not bug below -50°C?

With the 45nm 1366 chips, the CBB is quite high, the motherboard usually doesnt become a factor. I never used the X-Cool jumper and never had a problem cold booting.

The Extreme cooling options in the BIOS just mess with the CPU PPL voltages, maybe some other things. Thats all it does to my knowledge.

Yes, When I had my phase it would have a problem if I had to clear the cmos. The jumper allowed me to boot even with a default bios.

i have the SS up and running now and can boot at -35 to -45 without changing anything as well.

anyone notice that the new eleet tuning utility isn't working right?
meaning that it wont take the voltage above 1.599... or is it just me.
1.07

I believe I DL the most current version 3 weeks ago when I got the 980x, and it shows two additional drop downs below the one that goes to 1.6.  If memory serves correct I think you can use the additional drop downs to add another .4 (.2 +.2), for a total of at least 2.0 vcore.  I'm not there to look right now.

your right there...
but

mine doesn't change. when i went back to the older version. the one before this one..voltage works and changes fine from all 3 places.

johnksss

anyone notice that the new eleet tuning utility isn't working right?
meaning that it wont take the voltage above 1.599... or is it just me.
1.07

I noticed that to.
Thought it was my board.

good. so that means it's universal.