xxrabid93

Halo_003

xxrabid93

Halo_003

Rudster, look at it this way. At least you have a D0..

Not ALL D0's are better than all C0's. What voltage do you need for 4ghz stable on your C0? I need around 1.35v on my D0 for 4ghz stable.

I need about 1.45Vcore for 4Ghz, and a little over 1.5V for 4.1-4.2. Which is why I think it'll do better on water.

Oh wow. Ok. I thought your C0 was better than that (like around my D0). Nvm about that.

MHm... I wanna try it on DICE or water. I think that'll improve it a lot since it'll bring the temps WAY down.

voklskier4452

regardless of whether or not rud went back to an XP install, 01 plain and simple isnt worth running on anything but a wolfdale, even running lower clock speeds and on a much weaker card I can outscore rud

 

Yeah rudster wolfdale is the only way to run 01.  I can score just shy of 100k with a single 5770 and an e8600.  This benchmark just doesn't play well with anything else.

I finally found some insulated tape at Lowes.












[link=][img][/img][/link]

mmmhummm... I have that very same roll... in my hand right now ;) 

Question.  I plasti-dipped the back of the mobo...can I cover the back of the cpu socket area with plasti-dip? 

every single thing.  the thicker you put it on, the easier it comes off.

Ok thanks nate.  One more question about plasti-dipping the GPU's.  Do I plasti-dip over the warranty stickers and bios stickers?  I wouldn't think so...or there goes my warranty.

*ahem*  you have a pm

Put a peice of painters tape (or any low-tack tape) over the warranty stickers. I have seen people do that and the stickers be fine after plasti-dipping over them and then pulling up the plasti-dip later.

I don't know about you guys but the 480 looks better than I thought it would.
Got my replacement 980x the other day.
Though it still shows ridiculously low temps at idle and in bios (0C) this one overclocks a lot better.
Been running some benches hovering around 5.0Ghz on ambient water.
Now if I could get a video card that runs like it should.